Outer CV joints for Nissan NP300 Navara
Find the right outer CV joint for your Nissan NP300 Navara, whether rear-wheel drive or four-wheel drive. The range covers diesel engines from model year 2005 onwards, built for the...
Products for Outer CV joints for Nissan NP300 Navara
- Position: Outer
- Seal diameter: 67 mm
- Inner splines: 27
- Outer splines: 29
- Position: Front, Outer
- Inner splines: 36
- Total length: 175 mm
- Splines wheel side: 29
- Position: Front, Outer
- Inner splines: 26
- Total length: 187 mm
- Splines wheel side: 29
- Position: Front, Outer
- Inner splines: 27
- Outer diameter: 100 mm
- Splines wheel side: 29
- Position: Outer
- Seal diameter: 68 mm
- Inner splines: 36
- Total length: 182,5 mm
- Splines wheel side: 29
- Position: Outer
- Seal diameter: 67,1 mm
- Inner splines: 36
- Total length: 185,5 mm
- Splines wheel side: 29
Outer CV joints for Nissan NP300 Navara
The Nissan NP300 Navara is renowned for its impressive strength and ability to haul heavy loads under demanding conditions, placing extremely high demands on the vehicle's drivetrain. The outer CV joint is a critical link in this system, especially on four-wheel-drive models where the front axle is frequently subjected to acute angles and substantial torque. With us, you will find outer CV joints that match or exceed original specifications to maintain your vehicle's reliability and service life. Because the Navara is often used as a dedicated work vehicle, it is vital not to compromise on the quality of these moving parts, as failure can lead to costly downtime.
What does the outer CV joint do on a Nissan NP300 Navara?
The primary task of the outer CV joint is to transmit torque from the drive shaft to the front wheels while allowing the wheels to turn and articulate freely through the suspension. On a Nissan NP300 Navara, the outer joint is mounted right against the wheel hub and is a constant velocity joint (CV joint). This design is essential to deliver power smoothly and without vibration, irrespective of the angle of the wheel relative to the axle. Without a properly functioning outer CV joint, power transfer would jerk or fail entirely on full steering lock, making it indispensable for the vehicle's road handling and stability.
Common signs of wear
The clearest sign that an outer CV joint is wearing out on your Navara is a characteristic clicking or knocking noise heard when turning sharply, such as when parking or negotiating tight bends. This sound typically increases in intensity with the vehicle's speed and load. Another common symptom is vibration through the steering wheel while driving or under acceleration. Wear is often caused by a split CV boot, which allows protective grease to escape while letting dirt and water into the joint. If you spot grease splattered on the inside of the wheel rim, it is high time to inspect your drive shaft and its joints before total failure occurs.
How to choose the correct outer CV joint
Choosing the correct spare part for a Nissan NP300 Navara can be challenging due to technical variations across engine options, gearboxes, and specific ABS setups. When selecting a replacement, the most critical step is to check the spline count on both the inner and outer sections of the joint, as well as the diameter of the seal surface against the hub. To ensure an easy and completely reliable process, we recommend selecting your vehicle by make, model, and engine on our website. This automatically filters the outer CV joints verified for your specific configuration, minimising the risk of incorrect orders and ensuring installation proceeds without modification.
Related parts to check
Please also check these exact pages for the same vehicle when working on the outer CV joint:
When one drivetrain component shows signs of wear, nearby parts on the same vehicle frequently require inspection as well. Comparing these exact pages for the Nissan NP300 Navara makes it easier to determine whether the fault lies in the outer CV joint itself or in another adjacent section of the power transmission.
This is particularly relevant on models where vibrations, play, and noises can shift symptoms across multiple components within the same drivetrain. A quick check of related categories reduces the risk of replacing the right type of component while overlooking an adjacent part that contributes to the same issue.
- Nissan NP300 Navara
- Drive shafts for Nissan NP300 Navara
- Propeller shafts for Nissan NP300 Navara
Why shop at CVJoint24
CVJoint24 is your driveline specialist, operating as the international shop of a Swedish specialist with its warehouse in Helsingborg, Sweden. We offer an extensive, carefully selected range tailored to the specific demands of your Nissan NP300 Navara. We understand the importance of precise fitment and premium quality, especially for vehicles engaged in heavy-duty use or off-road driving. By focusing entirely on driveline expertise, we provide superior technical guidance and accurately specified products compared to general car parts retailers. With our reliable vehicle selection, comprehensive stockholding, and fast deliveries across the EU, we ensure your pickup returns to the road quickly with parts you can trust in any weather.
Frequently asked questions about outer CV joints for Nissan NP300 Navara
How do I know whether the outer or inner CV joint is worn on my Navara?
A worn outer CV joint typically makes a clicking or knocking noise on full steering lock, whereas a faulty inner CV joint tends to cause vibrations through the vehicle body during acceleration.
Can I replace just the outer CV joint, or must the complete drive shaft be replaced?
On the Nissan NP300 Navara, you can usually replace just the outer CV joint. We supply complete kits that include the joint, CV boot, grease, and necessary mounting hardware.
Is everything I need for the replacement included when I order from you?
Yes, our CV joint kits come complete with the outer joint, a vehicle-specific CV boot, high-grade grease, circlips, and the required boot clamps.
Why do CV joints wear out on the Nissan NP300 Navara?
The most common cause is a split CV boot letting dirt in and grease out, or heavy loading combined with wide steering angles when off-roading, which increases driveline stress.
Does the same outer CV joint fit all versions of the NP300 Navara?
No, specifications differ depending on the model year and drivetrain. Always filter by your vehicle's make, model, and engine variant to ensure you select the correct part.