Outer CV joints for Audi A4 Avant 1.8 Tfsi

Discover our range of outer CV joints suited for the Audi A4 Avant 1.8 Tfsi estate with front-wheel drive. To ensure you receive the right spare part for your car, simply select your...

Products for Outer CV joints for Audi A4 Avant 1.8 Tfsi

3 products
1 - 3 of 3
Item no.:359775
  • Position: Front, Outer
  • Inner splines: 28
  • Outer diameter: 94 mm
  • Splines wheel side: 42
Item no.:0572753
  • Position: Outer
  • Seal diameter: 76 mm
  • Inner splines: 27
  • Outer splines: 42
  • Joint diameter: 100 mm
Item no.:0550626
  • Position: Outer
  • Seal diameter: 76 mm
  • Inner splines: 28
  • Outer splines: 42

Outer CV joints for Audi A4 Avant 1.8 Tfsi

Maintaining the drivetrain on an Audi A4 Avant 1.8 Tfsi is vital to preserve the driving pleasure and safety the brand is renowned for. The outer CV joint is one of the most heavily stressed components in the car's power transmission, as it constantly copes with both engine torque and the angles created by steering and suspension movement. For an Audi A4 Avant 1.8 Tfsi, this means the component must be manufactured with high precision to endure the specific demands of front-wheel drive.

At CVJoint24, you will find carefully selected outer CV joints tailored precisely to your car's technical specifications. We understand the importance of every part matching or exceeding original equipment standards to ensure a long service life. By choosing the right spare part for your Audi A4 Avant 1.8 Tfsi, you minimise the risk of future breakdowns and costly repairs to other drivetrain components.

What does the outer CV joint do on an Audi A4 Avant 1.8 Tfsi?

The outer CV joint sits at the outboard end of the drive shaft, right by the wheel hub. Its primary job is to transfer rotational power from the gearbox and drive shaft to the front wheels, regardless of the angle at which the wheels are turned. This is particularly demanding on a front-wheel-drive car such as the Audi A4 Avant 1.8 Tfsi, where the front wheels must both propel the vehicle and steer it in different directions. Without a functioning outer constant velocity joint, power delivery would become jerky or fail altogether when cornering.

The design is based on a constant velocity joint mechanism, meaning it maintains a uniform rotational speed at the driven wheel across varying operating angles. For your Audi A4 Avant 1.8 Tfsi, this is essential to eliminate vibrations through the steering wheel and ensure stability control and ABS systems operate correctly, as these systems rely on smooth and predictable power delivery to the wheels.

Common signs of wear

The classic symptom of a worn outer CV joint on an Audi A4 Avant 1.8 Tfsi is a clicking or knocking noise heard when turning sharply, such as while parking or navigating a tight junction. The noise typically increases with vehicle speed and often becomes more noticeable under acceleration through a turn. If you ignore these warning signs, the joint can eventually shear completely, leaving the car without drive and stranded.

Another common sign is vibration felt through the steering wheel during driving, or grease splattered across the inside of the wheel rim or wheel arch. This is usually caused by a split CV boot, which allows lubricating grease to escape and lets dirt enter the joint. For Audi A4 Avant 1.8 Tfsi owners, it is wise to inspect the CV joint boots regularly to spot damage before moisture and road grit cause permanent damage to the joint itself.

Choosing the right outer CV joint

When buying a replacement outer CV joint for your Audi A4 Avant 1.8 Tfsi, several technical dimensions must match. These include the spline tooth count on the external spline (which slots into the wheel hub) and the internal spline (where the drive shaft connects). Furthermore, the seal diameter and the presence of an ABS ring can vary depending on the exact specification and build year of your car.

To make selecting the right part straightforward and dependable, simply select your car's make, model and engine variant in our search filter. This displays the parts guaranteed to fit your exact Audi A4 Avant 1.8 Tfsi. We offer complete kits that include everything you need for the replacement: the CV joint itself, a new boot, high-grade grease, clamps, and any required circlips or hub bolts. This ensures the repair can be completed professionally from the start.

Related parts to inspect

Be sure to inspect these related pages for the same vehicle when working on the outer CV joint:

When one drivetrain component shows signs of wear, nearby parts on the same car often warrant inspection too. By cross-referencing these exact pages for the Audi A4 Avant 1.8 Tfsi, it is easier to determine whether an issue lies with the outer CV joint itself or another related part of the drivetrain.

This is particularly relevant on models where vibrations, play and unusual noises can transfer symptoms across several driveline components. Checking related categories helps avoid replacing one part while overlooking an adjacent component that causes the same symptom.

Replacing an outer CV joint provides an ideal opportunity to check over the rest of the drivetrain on your Audi A4 Avant 1.8 Tfsi. Often, wear on an outer joint indicates that other driveline parts may also be nearing the end of their service life. Pay close attention to the condition of the drive shaft and check for play in the inner joints, as imbalance in one section of the driveshaft can rapidly damage newly fitted components.

Here are the key related categories for your vehicle:

  • Drive shafts for Audi A4 Avant 1.8 Tfsi – If the complete shaft is worn or corroded, a complete replacement can often be more cost-effective.
  • Inner CV joints for Audi A4 Avant 1.8 Tfsi – Vibrations under acceleration are often caused by the inner joint rather than the outer joint.
  • Audi A4 Avant 1.8 Tfsi – Main category for all drivetrain components suited to your model.

Why shop with CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders across the EU directly from our central warehouse in Helsingborg, Sweden. We focus on depth rather than breadth, giving us specialist technical expertise in parts like outer CV joints that general car parts stores often lack. When shopping for your Audi A4 Avant 1.8 Tfsi with us, you can trust that you will receive premium components engineered for precise fitment and built to endure demanding European road conditions.

We dispatch your order promptly across the European Union because we know how essential it is to get your vehicle back on the road. With our accurate fitment filter by make, model and engine, ordering the correct spare parts is simple and reliable. Our goal is to ensure you find the right part the first time, keeping your Audi A4 Avant 1.8 Tfsi performing at its best. Welcome to your driveline specialist.

Frequently asked questions about outer CV joints for Audi A4 Avant 1.8 Tfsi

What are the most common symptoms of a failing outer CV joint on an Audi A4 Avant 1.8 Tfsi?

The most common sign is a clicking or knocking noise when turning, particularly under acceleration. Vibrations in the steering wheel and grease sprayed onto the inside of the wheel from a torn CV boot are also clear warning signs.

Can I replace just the outer CV joint, or do I need to replace the entire drive shaft?

On an Audi A4 Avant 1.8 Tfsi, you can easily replace just the outer CV joint if the drive shaft itself is otherwise in good condition. This is often a much more economical solution than replacing the complete shaft.

Are the CV boot and grease included when I buy an outer CV joint from you?

Yes, our outer CV joints are supplied as complete fitting kits. This means you receive the CV joint, CV boot, specialist grease, clamps and necessary fitting hardware such as bolts or circlips.

How do I know exactly which CV joint fits my Audi A4 Avant 1.8 Tfsi?

The most reliable method is to select your vehicle's make, model, year and engine variant in our search tool. This filters the catalogue so you only see the parts that are technically compatible with your specific car.

Why does the outer CV joint wear out faster than the inner one?

The outer CV joint operates at considerably greater angles because it has to accommodate steering movements. In addition, it is located closer to the wheel and is more exposed to road dirt, salt and moisture if the boot gets damaged.

Is it difficult to replace the outer CV joint yourself on an Audi A4 Avant?

It requires a fair amount of mechanical experience and the right tools, such as a socket set and a suitable puller or hub tool. If you are unsure, we recommend consulting a professional garage, but for a confident DIY mechanic it is a very achievable job.