Outer CV joints for Audi A7 Sportback 3.0 Tfsi Quattro

Discover outer CV joints engineered for the Audi A7 Sportback 3.0 TFSI quattro with all-wheel drive. Select your vehicle make, model and engine to find the exact component for your...

Products for Outer CV joints for Audi A7 Sportback 3.0 Tfsi Quattro

6 products
1 - 6 of 6
Item no.:353121
  • Position: Front, Outer
  • Inner splines: 28
  • Outer diameter: 94 mm
  • Splines wheel side: 42
Item no.:0546729
  • Position: Outer
  • Seal diameter: 76 mm
  • Inner splines: 27
  • Outer splines: 42
  • Joint diameter: 100 mm
Item no.:357834
  • Position: Outer
  • Seal diameter: 76,5 mm
  • Inner splines: 29
  • Outer splines: 42
  • Joint diameter: 100 mm
Item no.:0565115
  • Position: Outer
  • Inner splines: 28
  • Outer diameter: 99 mm
  • Splines wheel side: 42
Item no.:0520785
  • Position: Outer
  • Seal diameter: 76 mm
  • Inner splines: 28
  • Outer splines: 42
Item no.:358699
  • Position: Front, Outer
  • Inner splines: 28
  • Outer diameter: 94 mm
  • Splines wheel side: 42

Outer CV joints for Audi A7 Sportback 3.0 Tfsi Quattro

The Audi A7 Sportback 3.0 Tfsi Quattro combines elegance with impressive performance. For its powerful six-cylinder engine to deliver output smoothly to the road surface, the drivetrain must remain in top condition. The outer CV joint is a crucial link in this assembly, especially on a four-wheel-drive car where stresses are high during hard acceleration and cornering. Selecting the correct replacement part for this exact variant is vital to maintaining the sharp driving dynamics Audi is renowned for. We supply components manufactured to the highest standards of materials and durability for your Audi A7 Sportback 3.0 Tfsi Quattro.

What does the outer CV joint do on the Audi A7 Sportback 3.0 Tfsi Quattro?

The primary task of an outer CV joint is to transmit torque from the drive shaft to the driven wheels while allowing them to steer and move with the suspension. On an Audi A7 Sportback 3.0 Tfsi Quattro, these joints operate under constant load, particularly as the Quattro system shifts torque between axles to maximise grip. The assembly typically uses a Rzeppa joint, which maintains a smooth, constant rotational velocity at varying operating angles. If this constant velocity joint fails, the vehicle loses its ability to handle the power of the 3.0 TFSI engine, resulting in poor driveability or even complete transmission breakdown.

Common signs of wear

The most frequent symptom of a failing outer CV joint is a rhythmic clicking or knocking noise on full steering lock under acceleration. This typically occurs when the internal ball bearings wear into their tracks. Another warning sign is vibration felt through the steering wheel that intensifies with road speed. You should also regularly inspect the CV boot; if the rubber splits, lubricating grease escapes while grit and road water penetrate inside. This dramatically accelerates joint wear. For owners of an Audi A7 Sportback 3.0 Tfsi Quattro, acting promptly on these symptoms prevents expensive collateral damage across the drivetrain.

How to choose the correct outer CV joint

When selecting a new outer CV joint for your Audi A7 Sportback 3.0 Tfsi Quattro, several technical measurements must be verified. Spline counts on both the internal and external sections can differ depending on the model year and gearbox setup. Furthermore, dimensions for the ABS ring, if integrated into the joint, must match precisely so the vehicle's electronic stability and braking systems function properly. The most reliable approach is to select your vehicle by make, model and engine variant in our store catalogue. This filters out unsuitable parts and ensures you receive the exact technical specification for your car.

Related parts to check

We recommend checking these exact pages for the same vehicle when working on the outer CV joint:

When one drivetrain component shows signs of wear, neighbouring parts on the same car often require attention as well. Comparing these exact pages for the Audi A7 Sportback 3.0 Tfsi Quattro makes it simpler to confirm whether play or noise originates from the outer CV joint or another adjacent section of the drivetrain.

This is particularly useful on high-torque models where vibrations, mechanical play and knocking sounds can easily travel between driveline components. Checking related categories helps ensure you do not replace one part while overlooking another linked item that is contributing to the problem.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders across the EU from our central warehouse in Helsingborg, Sweden. We combine in-depth technical knowledge with a carefully selected range of premium parts. When you order from us, you benefit from our exact-fit guarantee and direct access to specialist driveline advice. We know how crucial it is to get your vehicle back on the road quickly, which is why we dispatch stocked items promptly. By focusing purely on driveline assemblies, we offer expertise that general car parts retailers cannot match. Rely on CVJoint24 for the right part for your Audi A7 Sportback 3.0 Tfsi Quattro.

Frequently asked questions about outer CV joints for Audi A7 Sportback 3.0 Tfsi Quattro

How do I know if the outer CV joint on my Audi A7 3.0 TFSI is faulty?

The most common symptom is a clicking or knocking noise on full steering lock while driving. You may also notice vibrations or see grease splattered on the inside of the wheel if the CV boot has split.

Can I replace just the CV joint instead of the complete drive shaft?

Yes, on the Audi A7 Sportback 3.0 Tfsi Quattro you can usually replace just the outer CV joint, provided the drive shaft itself is undamaged and straight.

Why is the correct number of splines so important?

Splines are the teeth that lock the CV joint into the wheel hub and onto the drive shaft. If the spline count does not match exactly, the part will not fit, or it will risk damaging the shaft.

Are the CV boot and grease included when I buy an outer CV joint?

Yes, our CV joint kits come complete with a model-specific CV boot, high-grade grease, clamps, and the required hardware to ensure a proper replacement.

Does the Quattro system affect the choice of CV joint?

Yes, four-wheel drive models often have specific dimensions and load requirements for their CV joints compared to front-wheel drive versions. Always select your exact make, model and engine to ensure you get the right part.

How long will delivery take?

We dispatch all in-stock parts promptly from our central warehouse so you can get your Audi A7 Sportback 3.0 Tfsi Quattro back on the road without delay.