Outer CV joints for BMW 3 Serie

Find the right outer CV joint for your BMW 3 Serie from our comprehensive range. Whether you drive a saloon, estate or hatchback, rear-wheel drive or xDrive, we stock components tailored...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Outer CV joints for BMW 3 Serie

421 products
217 - 240 of 421
Item no.:655986
  • Position: Rear, Outer
  • Inner splines: 25
  • Seal diameter: 58,7 mm
  • Outer splines: 30
  • Total length: 132 mm
Item no.:352240
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:453846
  • Position: Rear, Outer
  • Inner splines: 28
  • Splines wheel side: 30
  • Total length: 133 mm
Item no.:455863
  • Position: Rear, Outer
  • Inner splines: 28
  • Splines wheel side: 30
  • Total length: 135 mm
Item no.:6520118
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 27
  • Outer diameter: 86 mm
  • ABS teeth: 48
Item no.:650171
  • Position: Rear, Outer
  • Inner splines: 24
  • Seal diameter: 57 mm
  • Outer splines: 27
  • ABS teeth: 48
Item no.:656744
  • Position: Rear, Outer
  • Inner splines: 25
  • Seal diameter: 58,7 mm
  • Outer splines: 30
  • Joint diameter: 87 mm
Item no.:6525912
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 27
  • Outer diameter: 94 mm
  • ABS teeth: 48
Item no.:0583439
  • Position: Rear, Outer
  • Inner splines: 25
  • Splines wheel side: 27
  • Outer diameter: 88 mm
  • ABS teeth: 48
Item no.:6584324
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 30
  • Outer diameter: 94 mm
Item no.:3550625
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 64,8 mm
  • Outer splines: 30
  • ABS teeth: 48
Item no.:651072
  • Position: Rear, Outer
  • Inner splines: 30
  • Seal diameter: 57,2 mm
  • Outer splines: 28
  • Thread size: M24X1,5
Item no.:359082
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Thread size: M16X1,5X72
Item no.:0546765
  • Position: Front, Outer
  • Inner splines: 33
  • Splines wheel side: 30
  • Outer diameter: 86 mm
  • ABS teeth: 48
Item no.:0596984
  • Position: Outer
  • Inner splines: 33
  • Splines wheel side: 31
  • Outer diameter: 86 mm
Item no.:6506630
  • Position: Outer
  • Inner splines: 25
  • Splines wheel side: 28
  • Outer diameter: 90 mm
Item no.:651013
  • Position: Rear, Outer
  • Inner splines: 30
  • Seal diameter: 57 mm
  • Outer splines: 28
  • Thread size: M24X1,5
Item no.:355085
  • Position: Front, Outer
  • Inner splines: 33
  • Splines wheel side: 37
  • Seal diameter: 65 mm
  • Thread size: M16X1,5
Item no.:0570412
  • Position: Rear, Outer
  • Inner splines: 25
  • Splines wheel side: 30
  • Outer diameter: 88 mm
Item no.:6558382
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 30
  • Outer diameter: 94 mm
Item no.:655325
  • Position: Rear, Outer
  • Inner splines: 33
  • Splines wheel side: 28
  • Seal diameter: 57,2 mm
  • Thread size: M24X1,5
Item no.:0529425
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • ABS teeth: 31
Item no.:456938
  • Position: Rear, Outer
  • Splines wheel side: 28
  • Seal diameter: 57 mm
  • Outer splines: 28
  • Splines gearbox side: 25
Item no.:653310
  • Position: Rear, Outer
  • Inner splines: 25
  • Seal diameter: 58,7 mm
  • Outer splines: 30
  • Total length: 132 mm
Showing 217–240 of 421 products

Outer CV joints for BMW 3 Serie

Maintaining the drivetrain on a BMW 3 Serie demands components of the highest precision. The outer CV joint is the part of the drive shaft located closest to the wheel, transferring torque from the gearbox to the road wheels even as they steer. For a car such as the BMW 3 Serie, renowned for its dynamic driving characteristics and sharp steering, the condition of the constant velocity joint is crucial to the experience behind the wheel. We currently stock 44 specially selected outer CV joints covering a wide spectrum of engine variants and drive configurations across the 3 Series range.

Whether your vehicle is rear-wheel drive or equipped with xDrive all-wheel drive, uncompromising standards for material quality and tolerances apply. A failed CV joint can ultimately cause a complete breakdown where the car loses drive entirely. Choosing the correct car parts from a dedicated specialist ensures your vehicle retains its performance while maximising the service life of adjacent drivetrain components. We focus on providing parts matching original specifications to guarantee a trouble-free installation.

What does an outer CV joint do on a BMW 3 Serie?

The outer CV joint, or constant velocity joint, handles the technically demanding task of transmitting steady torque to the driven wheels regardless of steering angle. On a BMW 3 Serie, this means the joint must cope with suspension travel as well as tight steering locks without losing efficiency or generating vibrations. It operates under significant loads, packed with high-pressure grease to minimise friction and heat build-up, and is sealed inside a durable rubber CV boot.

On all-wheel-drive xDrive models, the front outer constant velocity joints bear an especially heavy load because they steer and drive simultaneously. On rear-wheel-drive versions, the outer joints sit on the rear axle, primarily managing angle changes during acceleration and over uneven road surfaces. A healthy outer CV joint ensures smooth power delivery without jerking, which is fundamental to the premium drive expected of a BMW. When a joint begins to bind, it compromises not only ride comfort but also stability systems and torque distribution.

Common signs of wear

The classic symptom of a worn outer CV joint on a BMW 3 Serie is a rhythmic clicking or knocking noise on tight turns at low speeds, such as during parking manoeuvres. The noise typically speeds up in line with vehicle speed. Noticing this indicates that the internal steel balls have started galling grooves in the outer housing, usually because lubrication has dried up or become contaminated by road dirt and water.

Another critical indicator is vibration felt through the steering wheel or chassis under hard acceleration, signalling radial play in the joint. It is also vital to inspect the CV boot regularly. If the boot splits or slips off its seat, grease will escape and grit will enter. Finding grease splattered inside the wheel rim or over the suspension components means it is time to act before complete joint failure occurs. Catching a split boot early may allow a simple boot replacement, but significant wear requires a complete new outer CV joint.

How to select the right outer CV joint

Identifying the correct outer CV joint for your BMW 3 Serie can be complex because technical specifications differ between engine outputs, gearbox types and whether the car features xDrive. The differences primarily involve the spline counts on both the inner and outer stubs, along with the seal diameter. Certain models also incorporate dedicated ABS reluctor rings directly on the joint body, narrowing the specification further.

To avoid choosing the wrong part, we recommend filtering by your vehicle's exact make, model and engine variant. This isolates the parts that match your chassis configuration. Always verify whether your car requires an ABS ring fitted directly to the CV joint or relies on an integrated wheel bearing sensor. Comparing technical details like spline counts and overall length against your original part ensures a straightforward fitment without any unexpected surprises.

Related components to check

Be sure to review these relevant pages for the same vehicle when working on the outer CV joint:

When a drivetrain component wears out, related components on the same vehicle often warrant inspection. Cross-referencing these specific pages for the BMW 3 Serie helps confirm whether an issue stems solely from the outer CV joint or another interconnected section of the driveline.

This is especially important on models where vibrations, play and unwanted noises can transfer between multiple driveline parts. Checking related categories minimises the risk of replacing one correct part while overlooking an adjacent component that contributes to the very same fault.

Checking these parts together saves substantial workshop time and future labour costs, while ensuring your BMW regains its factory-fresh driving refinement.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders directly to customers across the EU from our Helsingborg warehouse. We understand the technical intricacies of the BMW 3 Serie and have curated an inventory combining breadth and high quality. Our exclusive focus on power transmission allows us to provide technical expertise that general motor factors rarely match. With carefully sourced outer CV joints for the 3 Series, we cover almost every configuration on European roads.

We recognise that accurate fitment is everything when fitting driveline components. That is why we provide thorough technical specifications and simple filtering by make, model and engine. When purchasing from us, you receive not just a spare part, but access to deep technical knowledge in automotive driveline repair. With fast European delivery and a steadfast dedication to quality, CVJoint24 is the trusted supplier for BMW owners who expect the best for their vehicle.

Frequently Asked Questions about outer CV joints for BMW 3 Serie

How do I know if the outer or inner CV joint has failed on my BMW 3 Serie?

A worn outer CV joint typically makes a clicking noise when turning on full lock at low speeds. A worn inner CV joint tends to cause vibrations throughout the car under acceleration, whether cornering or driving in a straight line.

Can I replace just the CV boot if the joint is not making noise yet?

Yes, if you catch a split CV boot early and the joint is still quiet and clean inside, it can be enough to thoroughly clean it, pack it with fresh grease and fit a new boot to extend its service life.

Does the same outer CV joint fit both the left and right side?

On most BMW 3 Serie models, the outer CV joints are identical on both the left and right sides, but exceptions do exist. Always check by selecting your car's make, model and engine to be completely sure.

Is it difficult to replace an outer CV joint on a BMW yourself?

It requires a selection of tools, including a heavy-duty socket for the hub nut and sometimes a puller. It is a moderately complex job that demands precision, especially when fitting the new joint onto the shaft to ensure the circlip seats correctly.

Why does the tooth count (splines) differ between CV joints for the same model?

BMW fits different drive shaft dimensions depending on engine torque and whether the car has a manual or automatic gearbox. It is therefore crucial to verify the spline count or filter by your specific model and engine variant.

Are grease and clamps included when I buy an outer CV joint from you?

Yes, our complete CV joint kits normally include the joint itself, a new CV boot, specialised grease, a circlip and the necessary clamps for a complete installation.

Can a bad CV joint affect the ABS?

Yes, if your BMW 3 Serie has the ABS ring mounted directly on the CV joint and this ring becomes damaged or contaminated with leaking grease, the ABS warning light may illuminate and the system may not work correctly.