Outer CV joints for BMW X1

Find the correct outer CV joint for your BMW X1 by exploring our comprehensive range engineered for both front-wheel drive and all-wheel drive models. Whether your vehicle is petrol,...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Outer CV joints for BMW X1

98 products
25 - 48 of 98
Item no.:356729
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Total length: 70 mm
Item no.:0556502
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 31
Item no.:356616
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Thread size: M16X1,5X72
Item no.:0506723
  • Position: Outer
  • Inner splines: 33
  • Splines wheel side: 31
  • Outer diameter: 86 mm
Item no.:651789
  • Position: Rear, Outer
  • Inner splines: 25
  • Seal diameter: 59 mm
  • Outer splines: 30
  • Joint diameter: 87 mm
Item no.:0541498
  • Position: Outer
  • Inner splines: 30
  • Splines wheel side: 31
  • Outer diameter: 76 mm
Item no.:3583484
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Thread size: M16×1,5
Item no.:0533049
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 31
  • Seal diameter: 56 mm
  • Outer splines: 31
Item no.:458941
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Total length: 62 mm
Item no.:0532563
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • ABS teeth: 31
Item no.:656909
  • Position: Rear, Outer
  • Inner splines: 25
  • Seal diameter: 59 mm
  • Outer splines: 30
  • Joint diameter: 87 mm
Item no.:653327
  • Position: Rear, Outer
  • Inner splines: 25
  • Seal diameter: 58,7 mm
  • Outer splines: 30
  • Total length: 132 mm
Item no.:3553718
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Total length: 70 mm
Item no.:0520632
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 31
Item no.:355782
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Thread size: M16X1,5X72
Item no.:0508658
  • Position: Outer
  • Inner splines: 33
  • Splines wheel side: 31
  • Outer diameter: 86 mm
Item no.:657218
  • Position: Rear, Outer
  • Inner splines: 25
  • Seal diameter: 59 mm
  • Outer splines: 30
  • Joint diameter: 87 mm
Item no.:0550811
  • Position: Outer
  • Inner splines: 30
  • Splines wheel side: 31
  • Outer diameter: 76 mm
Item no.:3513249
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Thread size: M16×1,5
Item no.:0544676
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 31
  • Seal diameter: 56 mm
  • Outer splines: 31
Item no.:456113
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Total length: 62 mm
Item no.:0559400
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • ABS teeth: 31
Item no.:651400
  • Position: Rear, Outer
  • Inner splines: 25
  • Seal diameter: 59 mm
  • Outer splines: 30
  • Joint diameter: 87 mm
Item no.:657384
  • Position: Rear, Outer
  • Inner splines: 25
  • Seal diameter: 58,7 mm
  • Outer splines: 30
  • Total length: 132 mm
Showing 25–48 of 98 products

Outer CV joints for BMW X1

The BMW X1 is a popular compact SUV that combines agile handling with robust drivetrain performance, but like any vehicle, its mechanical components suffer wear over time. The outer CV joint is a crucial drivetrain component that enables the wheels to turn whilst simultaneously receiving power from the engine. At CVJoint24, we offer an extensive range of outer CV joints for the BMW X1, covering everything from the early E84 models to the later F48 and U11 generations. By focusing on quality and precision, we ensure that your vehicle retains its characteristic driving dynamics and stability. We understand the importance of every component matching original specifications to prevent premature wear on surrounding parts of your BMW X1. Our range is handpicked to withstand the demands that both city driving and challenging terrain place on a modern SUV.

What does an outer CV joint do on a BMW X1?

The primary task of the outer CV joint is to transfer torque from the drive shaft to the front wheels, whilst allowing the wheels to move up and down with the suspension and pivot with the steering. On a BMW X1, particularly models equipped with xDrive all-wheel drive, these joints endure significant stresses during hard acceleration and cornering. As a constant velocity joint, it transfers power smoothly regardless of the wheel's operating angle. Without a functioning outer CV joint, power delivery becomes jerky and could ultimately lead to total failure, leaving the vehicle stranded with no drive. It is therefore vital that the joint remains thoroughly lubricated with the correct grease and protected by an intact CV boot. This stops dirt, road salt, and moisture from penetrating the precision-ground bearing surfaces and causing rapid metal degradation.

Common signs of wear

The most classic symptom of a worn outer CV joint on a BMW X1 is a distinct clicking or knocking noise when turning sharply, such as during parking manoeuvres or navigating tight junctions. The noise typically speeds up with vehicle speed and becomes more pronounced under load. Another frequent symptom is vibration through the steering wheel or chassis during acceleration, indicating that play has developed inside the joint. If you notice grease splattered across the inner rim or wheel arch, it is a clear sign that the CV joint boot has split. Once the grease escapes and road grit enters, the joint deteriorates rapidly. Ignoring these warning signs can result in damage to the BMW X1 drive shaft or cause the joint to seize entirely, presenting a serious safety hazard on the road. Early detection saves substantial repair costs.

How to choose the correct outer CV joint

Selecting the correct part for a BMW X1 requires attention to detail, as specifications vary depending on whether the car is front-wheel drive or four-wheel drive, as well as its engine and gearbox configuration. There are critical differences in the spline counts on both the inner race connecting to the shaft and the outer stub axle fitting into the wheel hub. Furthermore, the oil seal collar diameter and overall length can differ between engine variants. To be entirely confident you are ordering the right outer CV joint, we strongly recommend selecting your vehicle by make, model and engine variant in our catalogue. This filters our system to show only parts verified for your exact vehicle. Also check whether your car features an ABS ring fitted directly to the CV joint, as this is vital for the proper operation of the safety systems after installation.

Related parts to check

Be sure to inspect these related parts for your vehicle when working on the outer CV joint:

When one drivetrain component shows signs of wear, related components often require inspection as well. Comparing these exact categories for the BMW X1 makes it much easier to determine whether an issue lies with the outer CV joint or another adjacent section of the drivetrain.

This is particularly relevant on models where vibrations, play, and noises can transfer between multiple driveline parts. A quick check across related categories reduces the risk of replacing one correct part while overlooking an adjacent component that contributes to the same problem.

Replacing related parts at the same time whilst the suspension is already disassembled frequently saves both time and labour costs in the long run, avoiding repeated garage work later on.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching high-grade components across Europe from our central warehouse in Helsingborg, Sweden. We combine in-depth technical expertise with a product catalogue selected to meet the high standards expected by BMW drivers. When you purchase an outer CV joint for your BMW X1 from us, you can trust that the fitment is exact and that the component is built to endure demanding European driving conditions. We know how essential your vehicle is for daily transport, which is why we focus on helping you find the right parts quickly and effortlessly by filtering by make, model and engine. With our specialist focus on drivelines and dedication to quality car parts, CVJoint24 is the dependable choice for your BMW X1 spare parts. Our technical catalogue is updated continually to reflect the latest engineering specifications, giving you a smooth, professional purchasing experience every time you service your vehicle.

Frequently Asked Questions about outer CV joints for BMW X1

How do I know if my BMW X1 needs a new outer CV joint?

The most common sign is a clicking noise from the front suspension when making sharp turns under power. Vibrations during acceleration can also indicate wear.

Can I replace just the outer CV joint or do I have to replace the complete drive shaft?

On most BMW X1 models, you can easily replace just the outer CV joint, provided the drive shaft itself is not bent or damaged.

Does the same outer CV joint fit all BMW X1 models?

No, it varies depending on the model year, engine type, and whether your car is sDrive or xDrive. Always select your specific make, model, and engine to find the right part.

What is included when I purchase an outer CV joint from you?

Our kits are usually supplied complete with the CV joint itself, a vehicle-specific CV boot, high-quality grease, circlips, and the necessary fitting bolts.

Why is it important to check the ABS ring during replacement?

On many BMW X1 models, the ABS ring is mounted directly on the CV joint. If the ring is damaged or incorrect, the car's ABS and stability control systems will not function properly.

How long does it take to replace an outer CV joint on a BMW X1?

For an experienced mechanic, the job typically takes between 1 and 2 hours per side, depending on how seized the old components are.

Can a split CV boot cause the CV joint to fail?

Yes, absolutely. If the CV boot tears, grease leaks out and road dirt enters, which will wear out the constant velocity joint very quickly.