Outer CV joints for BMW X5 Xdrive 40 D E70

Here you will find a carefully selected range of outer CV joints to fit the BMW X5 xDrive 40 d in the E70 generation. This category page is tailored to give you a clear overview of parts...

Products for Outer CV joints for BMW X5 Xdrive 40 D E70

4 products
1 - 4 of 4
Item no.:0544664
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 30
Item no.:654004
  • Position: Rear, Outer
  • Inner splines: 25
  • Splines wheel side: 30
Item no.:0565039
  • Position: Outer
  • Inner splines: 33
  • Outer diameter: 86 mm
  • Splines wheel side: 30
Item no.:354397
  • Position: Outer
  • Seal diameter: 65 mm
  • Inner splines: 33
  • Outer splines: 30
  • Joint diameter: 86 mm

Outer CV joints for BMW X5 Xdrive 40 D E70

When driving a BMW X5 Xdrive 40 D E70, every component in the drivetrain needs to perform at its peak. The outer CV joint is a critical link exposed to substantial stress, especially considering the high torque delivered by the 40d engine and the intelligent power distribution of the xDrive system. Choosing the right spare parts is vital to maintaining your car's handling and safety. At CVJoint24, we are specialists in these driveline parts and offer solutions engineered precisely for the E70 chassis. By focusing on quality and precision, we ensure that your vehicle continues to deliver the pure driving pleasure BMW is renowned for.

Our range covers the specific requirements of your BMW X5 Xdrive 40 D E70, making us the natural choice when maintaining or repairing your drivetrain. We work exclusively with manufacturers who meet strict quality standards, ensuring that each component can handle the heavy loads and dynamic driving an X5 regularly faces. Replacing a worn joint in good time prevents more extensive damage to other driveline parts.

What does the outer CV joint do on a BMW X5 Xdrive 40 D E70?

The primary job of the outer CV joint on a BMW X5 Xdrive 40 D E70 is to transfer rotational power from the drive shaft to the front wheels, whilst allowing the wheels to steer and move vertically with the suspension. As the X5 is an all-wheel-drive vehicle (xDrive), the front outer CV joints play a central role in managing the torque directed forwards whenever required. The design is a constant velocity joint, meaning it maintains a uniform rotational speed regardless of the steering angle.

For a heavy and powerful SUV like the E70 model, the stresses during full steering lock and sharp acceleration are considerable. A properly functioning joint minimises friction and energy loss, contributing to better fuel economy and reduced wear across the rest of the drivetrain. Without a healthy outer joint, power cannot reach the wheels effectively while manoeuvring. This component enables your BMW to combine genuine off-road capability with passenger-car precision in its steering.

Common signs of wear

There are several clear warning signs indicating that the outer CV joint on your BMW X5 is starting to fail. The most common symptom is a clicking or knocking noise heard when making tight turns at low speeds, such as during parking. This sound occurs as the internal balls travel along worn tracks inside the joint. Another symptom is vibration felt through the steering wheel while driving, which can indicate play or imbalance in the constant velocity joint.

It is equally important to inspect the CV boot regularly. If the boot is split or has come loose, grease escapes whilst grit and water enter. This dramatically accelerates wear and rapidly leads to total joint failure. Spotting grease flung across the inside of the wheel rim or around the wheel arch is a clear sign that the boot has perished and the joint requires immediate attention. Ignoring these symptoms can ultimately cause the drive shaft to snap, leaving the vehicle stranded.

How to choose the correct outer CV joint

Finding the correct outer CV joint for a BMW X5 Xdrive 40 D E70 can be tricky, as exact specifications can vary depending on production month and equipment level. The key detail is to check the spline count (the teeth) both on the wheel-hub side and on the side connecting to the drive shaft. The seal diameter and the ABS ring design are also critical parameters to ensure your vehicle's safety systems operate seamlessly.

To make the selection process straightforward and accurate, we recommend selecting your car's exact make, model and engine variant in our shop. This filters down to the parts technically verified for your specific vehicle, eliminating misorders and saving time during installation. Remember that a correctly matched part not only fits physically, but is also built to endure the high torque demands of the potent 40d engine, which is essential for lasting service life.

Related parts to check

Be sure to check these exact pages for the same vehicle when working on the outer CV joint:

When one drivetrain component shows wear, adjacent parts on the same car often warrant inspection as well. Comparing these exact pages for the BMW X5 Xdrive 40 D E70 makes it easier to determine whether the issue lies purely with the outer CV joint or with another neighbouring section of the transmission.

This is particularly relevant on models where vibrations, play and strange noises can transfer symptoms across several parts in the same drivetrain. A quick check of related categories reduces the risk of replacing one correct component while overlooking an adjacent part that shares the same fault.

Proactively replacing worn parts prevents consequential damage that could prove far more expensive to repair later, whilst maintaining your car's exceptional ride comfort.

Why shop with CVJoint24?

CVJoint24 is your Swedish driveline specialist, supplying car parts across the EU from our warehouse in Helsingborg, Sweden. We combine deep technical expertise with an extensive range of high-quality components to give you the best possible shopping experience. When you buy from us, you receive not just a spare part, but the confidence of our fitment guarantee. We understand that your BMW X5 Xdrive 40 D E70 requires exact precision, which is why we partner exclusively with trusted manufacturers who meet the standards demanded by modern premium vehicles.

Backed by our streamlined logistics, we ship stocked parts promptly across the European Union so that you can get your car back on the road without delay. Our goal is always to make finding the right part simple first time. By choosing us, you benefit from specialist knowledge that understands complex four-wheel-drive systems and is dedicated to delivering the right part at the right price. We are your partner for a dependable drivetrain, whether you are a DIY mechanic or a professional garage.

Frequently asked questions about outer CV joints for BMW X5 Xdrive 40 D E70

How do I know if the outer CV joint on my BMW X5 E70 is worn or failing?

The most common symptom is a clicking or knocking noise at full steering lock when driving at low speeds. Steering wheel vibrations and grease splattered across the wheel rim from a split CV boot are also clear warning signs.

Can I replace just the CV boot instead of the entire joint?

Yes, provided you detect the damage early and the joint remains clean and well lubricated. If dirt and moisture have penetrated, or if the joint has already begun to make noises, the entire CV joint must be replaced.

Do all CV joints from the BMW X5 E70 fit my Xdrive 40 D?

No, CV joints vary depending on the engine variant and drivetrain setup. The 40d model produces substantial torque that demands specifically dimensioned components. Always filter by make, model and engine variant to find the correct match.

What is included when I purchase an outer CV joint kit from CVJoint24?

Our kits typically include the outer CV joint itself, a vehicle-specific CV boot, high-quality molybdenum grease, circlips, and the necessary clamps and bolts for a complete, hassle-free installation.

Why is it important to replace a worn CV joint immediately?

A severely worn CV joint can ultimately seize or shear completely, causing an immediate loss of drive and potentially damaging your suspension and gearbox.

Do you offer a fitment guarantee on CV joints for BMW?

Yes, we provide a fitment guarantee when you select your vehicle by make, model and engine, ensuring you receive the technically correct part for your BMW X5 Xdrive 40 D E70.