Outer CV joints for Citroen Xsara Break

Do you need a new outer CV joint for your Citroen Xsara Break? As a Swedish driveline specialist, we supply a carefully chosen range of precision-engineered components. To ensure you...

Products for Outer CV joints for Citroen Xsara Break

18 products
1 - 18 of 18
Item no.:3508600
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 55 mm
  • Outer splines: 25
  • ABS teeth: 29
Item no.:3597648
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 58,2 mm
  • Outer splines: 25
  • ABS teeth: 48
Item no.:3529356
  • Position: Outer
  • Inner splines: 23
  • Seal diameter: 56 mm
  • Outer splines: 25
  • ABS teeth: 29
Item no.:3517476
  • Position: Outer
  • Inner splines: 23
  • Seal diameter: 56 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:3515857
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 56 mm
  • Outer splines: 25
  • Thread size: M20X1,5
Item no.:3527909
  • Position: Front, Outer
  • Inner splines: 34
  • Seal diameter: 58,5 mm
  • Outer splines: 25
  • ABS teeth: 29
Item no.:3526511
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 58,4 mm
  • Outer splines: 25
  • ABS teeth: 29
Item no.:3548981
  • Position: Front, Outer
  • Inner splines: 34
  • Seal diameter: 55,7 mm
  • Outer splines: 25
  • ABS teeth: 29
Item no.:354509
  • Position: Front, Outer
  • Inner splines: 34
  • Splines wheel side: 25
  • Seal diameter: 54,8 mm
  • Thread size: M24X1,5
Item no.:0590797
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 58,4 mm
  • Outer splines: 25
  • ABS teeth: 29
Item no.:3500171
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 59 mm
  • Outer splines: 25
  • ABS teeth: 29
Item no.:0513643
  • Position: Outer
  • Inner splines: 22
  • Splines wheel side: 25
  • Outer diameter: 79 mm
  • ABS teeth: 48
Item no.:3536023
  • Position: Outer
  • Inner splines: 22
  • Splines wheel side: 25
  • Outer diameter: 79 mm
  • Outer splines: 25
Item no.:357619
  • Position: Front, Outer
  • Inner splines: 22
  • Seal diameter: 59 mm
  • Outer splines: 25
  • ABS teeth: 48
Item no.:358195
  • Position: Front, Outer
  • Inner splines: 34
  • Seal diameter: 58 mm
  • Outer splines: 25
  • ABS teeth: 29
Item no.:3500711
  • Position: Front, Outer
  • Inner splines: 34
  • Seal diameter: 58,5 mm
  • Outer splines: 25
  • ABS teeth: 48
Item no.:3523085
  • Position: Front, Outer
  • Inner splines: 34
  • Splines wheel side: 25
  • Seal diameter: 58,5 mm
  • ABS teeth: 48
Item no.:3566049
  • Position: Front, Outer
  • Inner splines: 22
  • Seal diameter: 60 mm
  • Outer splines: 25
  • ABS teeth: 29

Outer CV joints for Citroen Xsara Break

The Citroen Xsara Break is a versatile estate that requires dependable components to withstand the everyday challenges of European roads. The outer CV joint plays a pivotal role in the vehicle's drivetrain by connecting the drive shaft to the wheel hub. At CVJoint24 you will find a carefully selected range of outer CV joints developed specifically to meet the technical requirements of the Xsara Break. Our range covers a broad selection of engine options and model years, from the earliest versions to the final production models. As a Swedish driveline specialist, we understand the importance of supplying parts that not only fit precisely, but also perform reliably over many kilometres. Investing in a quality joint is an investment in your car's future reliability and your safety on the road.

What does the outer CV joint do on a Citroen Xsara Break?

The outer CV joint on a Citroen Xsara Break is a constant velocity joint whose primary task is to transfer power from the gearbox to the front wheels at a smooth, constant speed, regardless of steering angle. This is particularly crucial on a front-wheel-drive car like the Xsara Break, where the front wheels must handle both vehicle propulsion and steering. Inside the joint is a precision mechanism featuring ball bearings and tracks, lubricated with dedicated high-pressure grease. This design allows the drive shaft to rotate smoothly even under full steering lock or when driving over road bumps. Without this flexibility, the drivetrain would experience severe mechanical stress that quickly leads to component failure. A well-functioning outer CV joint is therefore essential for both driving comfort and safety, ensuring vibration-free power delivery.

Common signs of wear

Spotting wear on an outer CV joint early can save you from costly repairs down the line. The most classic sign of a worn joint on a Citroen Xsara Break is a rhythmic clicking or knocking noise that occurs during cornering, particularly under acceleration. If the noise disappears when driving straight ahead, this is a strong indication that the outer joint is the culprit. Another common symptom is vibration felt through the steering wheel or the car's chassis under acceleration. You should also regularly inspect the CV boots. If a boot is split or cracked, vital grease escapes while road grime, water and grit enter the joint. This creates an abrasive paste that ruins the hardened internal surfaces within a very short time, leading to catastrophic failure where the car completely loses drive.

How to choose the correct outer CV joint

Selecting the correct outer CV joint for your Citroen Xsara Break requires care, as specifications can vary across different engines and model years. There are three key factors to consider: the number of outer splines that engage the wheel hub, the number of inner splines where the drive shaft attaches, and whether the joint is equipped for the ABS system. Some variants feature an ABS reluctor ring pressed directly onto the joint, whilst others utilise a magnetic sensor. To eliminate uncertainty and ensure an exact fit, we always recommend selecting your specific car by make, model and engine in our vehicle selector. This filters out everything except the exact components for your car. Remember that using the correct tightening torque during installation is vital for joint service life, so always follow the manufacturer's torque specifications for your specific Citroen to ensure the component sits securely and performs as intended.

Related parts to check

Be sure to check these exact pages for the same vehicle when working on the outer CV joint:

When one drivetrain component shows signs of wear, neighbouring parts on the same car often require inspection as well. By comparing these exact pages for the Citroen Xsara Break, it is much easier to establish whether the fault lies in the outer CV joint itself or in an adjacent section of the driveline.

This is especially true for models where vibrations, play and strange noises can travel across multiple components within the same drivetrain. A quick check across related categories reduces the risk of replacing the correct component type while overlooking an adjacent worn part that produces the very same symptoms.

By checking these components at the same time, you minimise the risk of having to dismantle the suspension again in the near future, saving both valuable time and money.

Why buy from CVJoint24?

When you choose to buy from CVJoint24, you choose a partner passionate about drivetrains and power transmission. We are a Swedish driveline specialist that puts quality and customer value first. Our range for the Citroen Xsara Break is selected with great care to provide the ideal balance between price and performance. We dispatch directly from our central warehouse in Helsingborg, Sweden, delivering across the EU to ensure you receive your car parts promptly. With us, you receive more than just a replacement part; you gain access to specialist technical knowledge and customer support dedicated to keeping your vehicle on the road with the right component from the start. We are your trusted partner for all driveline components.

Frequently asked questions about outer CV joints for Citroen Xsara Break

How do I know if my Citroen Xsara Break needs a new outer CV joint?

The most common symptom is a clicking noise when turning, especially under acceleration. Steering wheel vibrations and grease splattered across the wheel rim from a split CV boot are also clear warning signs.

Can I replace just the CV boot if the joint is still working?

Yes, if you catch a split boot early before road dirt has penetrated and damaged the joint, replacing the boot and repacking it with fresh grease can be sufficient.

Are fitting accessories included when I buy an outer CV joint?

Yes, our CV joint kits are normally supplied complete with the CV boot, grease, clamps and the central hub nut or bolt required for installation.

Why is it important to select my car's make, model and engine?

The Citroen Xsara Break uses different CV joints depending on the engine variant and model year. By selecting your exact make, model and engine, our fitment guarantee ensures you receive the correct part.

How long will delivery take?

We dispatch quickly from our central warehouse so you receive your parts promptly, getting your vehicle back on the road without delay.

What happens if I continue driving with a worn CV joint?

A damaged CV joint can eventually fail completely, causing a total loss of drive and leaving you stranded. In the worst case, it can also damage surrounding suspension components.