Outer CV joints for Fiat Stilo

Find the right outer CV joint for your Fiat Stilo. Our range covers a wide selection of hatchback models, whether powered by petrol or diesel engines. To ensure you choose parts that...

Products for Outer CV joints for Fiat Stilo

8 products
1 - 8 of 8
Item no.:0526196
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 52 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:0510600
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 51 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:0579462
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 59 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:356372
  • Position: Outer
  • Inner splines: 24
  • Seal diameter: 51 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:356786
  • Position: Front, Outer
  • Inner splines: 21
  • Seal diameter: 51 mm
  • Outer splines: 22
  • Thread size: M22X1,5
Item no.:0539725
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 51 mm
  • Outer splines: 25
  • Thread size: M28X1,5
Item no.:3542965
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 59 mm
  • Outer splines: 25
  • ABS teeth: 44
Item no.:256446
  • Position: Front, Outer
  • Inner splines: 25
  • Seal diameter: 59 mm
  • Outer splines: 25
  • ABS teeth: 44

Outer CV joints for Fiat Stilo

The Fiat Stilo requires high-quality components to handle power transmission reliably and safely. The outer CV joint is a crucial part of the front suspension and steering assembly, transferring torque from the gearbox to the wheels while allowing for steering angles and suspension movement. At CVJoint24, you will find an extensive range of outer constant velocity joints tailored specifically for different versions of the Stilo. Our selection covers most configurations, from smaller petrol engines to powerful diesel variants. Selecting the correct component is vital for vehicle longevity and safety, as a faulty joint can cause severe handling and steering issues.

What does an outer CV joint do on a Fiat Stilo?

The outer CV joint is fitted at the wheel end of the drive shaft. Its primary role is to transfer power seamlessly even when the wheels are turned at sharp angles. On front-wheel-drive vehicles like the Fiat Stilo, these joints endure significant stress, particularly when accelerating through corners or driving over rough surfaces. As a constant velocity joint, it maintains a steady rotational speed regardless of the operating angle. Without an intact outer CV joint, drive cannot reach the wheels smoothly and reliably, directly impacting the handling, stability, and overall driving characteristics of your Fiat.

Common symptoms of wear

The most frequent sign of a failing outer CV joint on your Fiat Stilo is a distinct clicking or knocking noise when turning sharply, such as during parking manoeuvres or navigating junctions. This noise typically intensifies with speed and engine load. Another symptom is steering wheel vibration under acceleration. If a CV boot has split, dirt, grit, and moisture enter the joint while essential lubricating grease escapes. This causes rapid wear and can lead to total joint failure, causing loss of drive and creating a hazardous situation on the road.

Choosing the correct outer CV joint

Identifying the correct outer CV joint for your Fiat Stilo can be challenging due to variations in engine size, gearbox type, and whether the vehicle has an ABS system. It is essential to check the spline count on both the internal and external sections of the joint, as well as the seal diameter. Some versions feature integrated ABS reluctor rings that must match your vehicle's wheel speed sensors. To ensure an exact match, select your car's make, model, and engine variant in our shop, helping you avoid incorrect purchases and unnecessary returns.

Related components to inspect

We also recommend checking these exact pages for the same vehicle when working on the outer CV joint:

When a driveline component shows signs of wear, neighbouring parts often require inspection too. By comparing these dedicated pages for the Fiat Stilo, it is easier to determine whether the issue lies purely with the outer CV joint or another driveline component.

This is especially important on models where vibrations, play, and noises can travel between several parts along the drivetrain. Checking related categories reduces the risk of replacing one component while missing an adjacent worn part.

Renewing adjacent wear parts at the same time often saves considerable time and garage labour costs, as the suspension and axle assembly is already dismantled.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist shipping from our central warehouse across the EU. We combine thorough technical expertise with comprehensive coverage for Fiat models. When you order an outer CV joint for your Fiat Stilo, you can rely on rigorous quality standards and guaranteed fitment. Our dedicated driveline focus means we understand specific transmission challenges better than generic car-part retailers. With prompt EU dispatch, secure online ordering, and knowledgeable customer support, we are the trusted choice for drivers who demand durability and precision.

Frequently Asked Questions about outer CV joints for Fiat Stilo

How do I know if my Fiat Stilo needs a new outer CV joint?

The clearest sign is a clicking or knocking noise when cornering, especially under acceleration. Vibrations in the steering wheel during acceleration can also indicate wear.

Can I replace just the outer CV joint, or do I have to replace the entire drive shaft?

On the Fiat Stilo, you can usually replace just the outer CV joint if the shaft itself is otherwise undamaged, which is a much more cost-effective solution than replacing the complete drive shaft.

Do all outer CV joints fit every Fiat Stilo model?

No, there are variations depending on the engine variant (e.g. 1.6 vs 1.9 JTD) and whether the car has ABS. Always select your specific make, model and engine to find the exact part.

What is included when I buy an outer CV joint from you?

Our CV joints are normally supplied as complete fitting kits containing the joint itself, a new CV boot, high-quality grease, clamps, and any required circlip or bolt.

Why is it important to replace a damaged CV boot on my Fiat Stilo immediately?

A damaged CV boot lets in dirt and water, which quickly destroys the internal components of the constant velocity joint. By replacing the boot promptly, you can prevent a more costly replacement of the entire CV joint.