Outer CV joints for Honda Logo

When your Honda Logo starts making knocking noises on full lock, the outer CV joint often needs replacement. At CVJoint24, we are driveline specialists offering high-quality components...

Products for Outer CV joints for Honda Logo

4 products
1 - 4 of 4
Item no.:0528265
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 55 mm
  • Outer splines: 26
  • ABS teeth: 50
Item no.:0575050
  • Position: Outer
  • Inner splines: 26
  • Splines wheel side: 23
  • Seal diameter: 49 mm
  • ABS teeth: 50
Item no.:0555806
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 55 mm
  • Outer splines: 26
  • ABS teeth: 50
Item no.:354055
  • Position: Front, Outer
  • Inner splines: 28
  • Seal diameter: 55 mm
  • Outer splines: 26
  • ABS teeth: 50

Outer CV joints for Honda Logo

The Honda Logo is a compact, reliable car often used for city driving, which places demanding loads on its drivetrain. The outer CV joint is a critical component exposed to substantial stress every time you turn or accelerate. For a car such as the Honda Logo, manufactured between 1999 and 2002, wear on these components is natural over time. We supply a carefully curated range of products adapted to meet the technical specifications of this model. Maintaining the drivetrain is vital for preserving manoeuvrability and safety, especially in dense urban conditions where tight turns are part of daily driving.

What does the outer CV joint do on a Honda Logo?

The outer CV joint is located at the far end of the drive shaft, closest to the wheel. Its primary job is to transfer torque from the gearbox and drive shaft to the front wheels while allowing the wheel to move freely during steering and suspension travel. It is a constant velocity joint, meaning it maintains a uniform rotational speed regardless of the steering angle. On a front-wheel-drive car like the Honda Logo, this function is fundamental. Without a properly functioning outer CV joint, power delivery becomes jerky and steering performance suffers, which can ultimately lead to total failure of the driveline.

Common signs of wear

The classic symptom of a worn outer CV joint is a rhythmic clicking or knocking noise heard when taking sharp corners, such as when parking or turning at junctions. The noise typically speeds up as the car accelerates. Another clear indicator is a split CV boot. If the boot tears, grease escapes while dirt and water penetrate the joint, rapidly destroying the internal bearing surfaces. You may also notice steering wheel vibrations during acceleration if wear is advanced. Ignoring these symptoms can cause the CV joint to seize or snap completely, leaving the vehicle undriveable.

Choosing the right outer CV joint

To choose the correct outer CV joints for Honda, it is essential to check specific technical data. Key differences between variants include the spline count on both the inner and outer sections of the joint, as well as whether the car is fitted with an ABS system. Even though the Honda Logo had a limited production run, verifying dimensions remains crucial. The most reliable way to find the right part is to filter by make, model and engine variant in our shop. Selecting your exact engine and model year narrows down compatible options, minimising the risk of ordering the wrong part.

Related parts to inspect

Be sure to check these exact pages for the same vehicle when working on the outer CV joint:

When a drivetrain component wears out, surrounding parts on the same car often require inspection as well. Comparing these exact pages for the Honda Logo makes it easier to determine whether an issue lies purely with the outer CV joint or another adjacent driveline component.

This is especially important on models where vibrations, play and unusual noises can shift symptoms across several parts of the drivetrain. A quick check of related categories reduces the risk of replacing one part while overlooking a neighbouring component that contributes to the problem.

Replacing worn ancillary parts at the same time saves both time and money in the long run.

Why shop at CVJoint24?

As a Swedish driveline specialist, we offer dedicated expertise that general motor factors often lack. We understand the technical details of the drivetrain and focus entirely on supplying car parts with an accurate fit. When you shop with us, you benefit from our fitment guarantee, giving you complete confidence that your ordered parts will suit your vehicle. With swift dispatch across Europe from our central warehouse and a comprehensive stock of quality components, we ensure your Honda Logo returns to the road without delay. We combine technical knowledge with a smooth buying experience to be your natural choice for replacement CV joints.

Frequently asked questions about outer CV joints for Honda Logo

How do I know if my Honda Logo needs a new outer CV joint?

The most common sign is a clicking noise from the front wheels when taking sharp turns. You should also check whether the CV boot is split or if there are grease splatters on the inside of the wheel rim.

Can I replace just the boot if the CV joint is still working?

Yes, if you catch a split boot early before dirt has had time to penetrate and cause noises, replacing the boot and repacking it with fresh grease may be sufficient.

Do all outer CV joints fit every Honda Logo model?

No, there can be variations in the number of splines and ABS reluctor rings. Always use our search selector by choosing your car's make, model and engine to ensure the correct fitment.

Are fitting accessories such as grease and clips included?

Yes, our outer CV joints are normally supplied as complete kits containing the CV joint, CV boot, grease, clips and, where applicable, a new centre bolt or axle nut.

Why is it important to check the ABS ring during replacement?

On the Honda Logo, the ABS ring is often mounted directly on the outer CV joint. If the ring is cracked or corroded, it can trigger ABS error codes, and it is most cost-effective to resolve this while replacing the CV joint.

How quickly can a CV joint for Honda Logo be delivered?

We dispatch in-stock items swiftly from our central warehouse so you can get your car repaired and back on the road as quickly as possible.