Outer CV joints for Mini

Find the right outer CV joint for your Mini by selecting your vehicle's make, model and engine. Our range covers front-wheel drive and all-wheel drive configurations across petrol,...

Choose model

Choose a model to move to more precise products and the next step in the vehicle tree.

Products for Outer CV joints for Mini

118 products
1 - 24 of 118
Item no.:0544918
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 54 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:0521545
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 31
Item no.:352320
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • ABS teeth: 31
Item no.:257142
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Total length: 71 mm
Item no.:0571164
  • Position: Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
Item no.:450412
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Total length: 62 mm
Item no.:0561567
  • Position: Outer
  • Inner splines: 23
  • Seal diameter: 54 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:0560102
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 52 mm
  • Outer splines: 26
  • Thread size: M22 x 1,5
Item no.:159044
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 52 mm
  • Outer splines: 26
  • Thread size: M22 x 1,5
Item no.:0541471
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 26
  • Seal diameter: 54 mm
  • Outer splines: 26
Item no.:356711
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 26
  • Total length: 137 mm
  • ABS teeth: 24
Item no.:0507986
  • Position: Outer
  • Inner splines: 28
  • Splines wheel side: 31
  • Seal diameter: 56 mm
  • Outer splines: 31
Item no.:0538851
  • Position: Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Total length: 70 mm
Item no.:0575304
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Thread size: M16×1,5
Item no.:0558283
  • Position: Front, Outer
  • Inner splines: 25
  • Splines wheel side: 26
  • Outer diameter: 87 mm
Item no.:3594626
  • Position: Front, Outer
  • Inner splines: 25
  • Seal diameter: 52 mm
  • Outer splines: 26
  • Thread size: M22 x 1,5
Item no.:0519839
  • Position: Front, Outer
  • Inner splines: 33
  • Splines wheel side: 31
  • Outer diameter: 86 mm
Item no.:353261
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Thread size: M16X1,5X72
Item no.:3537011
  • Position: Front, Outer
  • Inner splines: 26
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Thread size: M16X1,5
Item no.:0529999
  • Position: Front, Outer
  • Inner splines: 24
  • Splines wheel side: 26
  • Outer diameter: 81 mm
Item no.:3588879
  • Position: Front, Outer
  • Inner splines: 33
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Total length: 142 mm
Item no.:652294
  • Position: Rear, Outer
  • Inner splines: 30
  • Seal diameter: 56 mm
  • Outer splines: 31
  • Total length: 61,5 mm
Item no.:3505205
  • Position: Outer
  • Inner splines: 21
  • Seal diameter: 54 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:0524817
  • Position: Outer
  • Inner splines: 30
  • Splines wheel side: 31
  • Outer diameter: 76 mm
Showing 1–24 of 118 products

Outer CV joints for Mini

The outer CV joint is a critical component in your Mini's power transmission and plays a vital role in delivering that famous go-kart handling the marque is renowned for. Located at the wheel hub, the primary job of the outer CV joint is to transmit torque from the drive shaft to the front wheels while allowing the wheel to steer and travel vertically as you drive. At cvjoint24.com, you will find a carefully selected range covering everything from the early R-series to the latest F-generation models. Keeping your constant velocity joints in top condition is not merely a matter of ride comfort, but essential for safety and the long-term durability of your vehicle's entire drivetrain.

How outer CV joints vary between Mini models

Mini has developed an extensive model line-up over the years, meaning the outer CV joint can differ substantially between generations and body styles. A standard Mini Hatch often uses smaller, lighter joints compared to the heavy-duty components required for a Mini Countryman, particularly when fitted with ALL4 all-wheel drive. Key differences include overall dimensions, spline counts both into the wheel hub and onto the drive shaft itself, and whether the joint features an integrated ABS ring. Engine variants also matter: a high-performance John Cooper Works places far higher demands on CV joint strength than an entry-level One. It is therefore vital to look not only at the model name, but also at the precise technical specifications of your car.

Common signs of wear

Identifying a failing outer CV joint on a Mini is straightforward if you know what to listen for. The classic symptom is a rhythmic clicking or knocking noise on full steering lock at low speeds, such as during parking manoeuvres. This noise occurs when the joint's bearings wear grooves into the outer housing, resulting in play. Other typical signs include steering wheel vibrations under acceleration or grease splattered across the inside of the wheel rim and wheel arch liner. Split CV boots are the primary culprit behind grease leaks, causing joint failure when road grime and water penetrate the assembly and wash away the lubrication. If you notice these symptoms, you should also inspect your drive shafts for Mini to see if further driveline parts need attention.

Choosing the correct outer CV joint for your Mini

To ensure you order the right part for your Mini, the most reliable method is to filter by your car's make, model and engine variant. A few technical details are also worth verifying before ordering. Always confirm the spline count on both the outer stub shaft that fits into the wheel hub and the internal splines where the drive shaft connects. On certain older Mini models, the ABS reluctor ring is pressed directly onto the outer CV joint, making the correct tooth count essential for your car's safety systems to function properly. We also recommend fitting a fresh CV joint boot and using the supplied specialist grease during installation to maximise the lifespan of your replacement part. Checking these details beforehand avoids unnecessary returns and ensures a lasting repair.

Popular Mini models to explore next

Select the correct Mini model for outer CV joints:

With such a broad range of options, choosing by specific model is often the best next step. Selecting your exact model directs you to a tailored page for precise fitment, drivetrain configuration, and the parts engineered specifically for your vehicle.

By choosing your specific model from the list above, you can be confident that the technical specifications match your car's exact requirements, from spline counts to ABS sensor compatibility.

Why buy from cvjoint24.com

As a Swedish driveline specialist shipping across the EU from our central warehouse in Helsingborg, Sweden, we understand the specific needs of Mini owners. We focus on supplying components of the highest precision and durability, backed by a comprehensive fitment guarantee across our entire range. Shopping with us means getting the right part the first time, supported by in-depth driveline expertise and a carefully managed inventory. We appreciate that vehicle repairs are time-sensitive, which is why we offer fast dispatch across Europe on our stocked product lines. Choosing cvjoint24.com gives you access to dedicated technical support from transmission specialists, combined with the reliability of an established European supplier to keep your Mini performing kilometre after kilometre.

Frequently asked questions about outer CV joints for Mini

How do I know if my Mini needs a new outer CV joint?

The most common sign is a clicking noise when making sharp turns at low speed. You may also notice vibrations during acceleration or see grease leaking from a split CV boot on the inside of the wheel.

Can I replace just the CV boot instead of the entire CV joint?

If you catch a cracked CV boot early, before the joint has begun making noise, replacing just the boot and repacking it with fresh grease may suffice. If the joint is already clicking, it is damaged and must be replaced completely.

Do the CV joints differ between the Mini Cooper and Countryman?

Yes, they often differ in size and spline count. The Countryman is a heavier vehicle and often requires sturdier components, especially if equipped with all-wheel drive (ALL4).

What happens if I keep driving with a damaged outer CV joint?

In the worst case, the CV joint can fail completely, resulting in a total loss of drive and leaving you stranded. It can also cause consequential damage to the wheel bearing and drive shaft if the vibrations become too severe.

Is everything I need for installation included in the kit?

Yes, when you purchase an outer CV joint from us, the kit normally includes the joint itself, a new CV boot, stainless steel clamps, a circlip, a centre bolt or nut, and specialised grease for optimal lubrication.

How do I find the right CV joint for my Mini?

Select your Mini's make, model, and engine variant in the search filter on our website. Our system will then display the CV joints that are technically compatible with your specific car.