Outer CV joints for Polestar

Searching for a premium outer CV joint for your Polestar? As a Swedish driveline specialist, we offer precision-fit components engineered for your car's electric drivetrain. The outer CV...

Choose model

Choose a model to move to more precise products and the next step in the vehicle tree.

Products for Outer CV joints for Polestar

3 products
1 - 3 of 3
Item no.:0561282
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 54,1 mm
  • Outer splines: 40
  • Thread size: M10X1,5
Item no.:356041
  • Position: Front, Outer
  • Inner splines: 26
  • Splines wheel side: 40
  • Seal diameter: 54 mm
  • Thread size: M10X1,5
Item no.:652351
  • Position: Rear, Outer
  • Inner splines: 26
  • Splines wheel side: 40
  • Seal diameter: 54 mm
  • Thread size: M10X1,5

Outer CV joints for Polestar

The outer CV joint is an essential component in your Polestar's drivetrain. Its main job is to transfer torque from the drive shaft to the front wheels while allowing them to turn and move vertically with the suspension. For a brand like Polestar, where performance and instantaneous torque from electric motors take centre stage, these components face exceptionally high demands. An outer CV joint must withstand the massive loads produced under heavy acceleration, especially at sharp steering angles.

Here at CVJoint24, you will find outer CV joints engineered specifically to match or exceed original specifications. We understand that an electric car demands precision in every detail to preserve the whisper-quiet, vibration-free ride characteristic of the brand. Choosing the correct replacement part protects both your vehicle's reliability and its energy efficiency, as a worn joint causes unnecessary friction throughout the drivetrain.

How outer CV joints differ between Polestar models

Polestar has rapidly transformed from Volvo's performance division into an independent manufacturer of high-performance electric cars. Consequently, drivetrain engineering has evolved considerably. The outer constant velocity joint on a modern EV such as the Polestar 2 differs significantly from those in conventional combustion-engine vehicles in both dimensions and material choice. Because electric motors deliver peak torque from zero rpm, CV joints are subjected to far more direct and aggressive forces.

Depending on whether your vehicle is front-wheel drive or all-wheel drive, the exact specifications of the outer CV joint can vary. This encompasses everything from the spline count on the shaft to the diameter of the joint housing and the ABS ring design. Understanding these technical nuances is essential to find a part that seats perfectly in the wheel hub. We continuously update our catalogue to reflect every technical revision across the Polestar range, ensuring you always find a component with the exact technical profile needed.

Common signs of wear

The most typical symptom of a failing outer CV joint is a rhythmic clicking or knocking noise when cornering, particularly under acceleration. This sound usually indicates that grease has leaked out or been contaminated, resulting in metal-on-metal contact between the bearings and the joint tracks. If you hear this noise, it is time to inspect the CV joint immediately before complete failure occurs, which could leave you stranded at the roadside.

Another clear sign is vibration felt through the steering wheel or the car's chassis when driving. While vibrations are commonly linked to an inner CV joint, a severely worn outer joint can also cause an unsettled feel across the front axle. It is equally important to inspect the CV boot regularly. A split boot is the primary cause of premature joint failure, allowing grit and moisture to enter and ruin the precision-machined surfaces within. If caught early enough, fitting a replacement boot may suffice, but once noises develop, replacing the complete joint is virtually always necessary.

Choosing the correct outer CV joint for your Polestar

Selecting the right spare part for a technologically advanced car like a Polestar demands accuracy. The most reliable way to find the right part is to choose your car's make, model and engine from our catalogue. Selecting your exact vehicle configuration filters out incompatible components automatically, eliminating guesswork and preventing frustrating delays in the garage.

When choosing an outer joint, check whether related components need attention at the same time. If your drive shafts for Polestar show signs of corrosion or spline wear, replacing the complete assembly could be the smartest move. Always make sure your new CV joint comes complete with all required mounting accessories, such as circlips, grease and a new boot. At CVJoint24, our kits contain everything you need for a professional job, saving you time and ensuring lasting performance.

Popular Polestar models to explore

Continue to the relevant Polestar model for outer CV joints:

When browsing a broad catalogue, narrowing it down by model is the logical next step. Selecting your specific model ensures accurate compatibility, matching your driveline setup with the exact parts engineered for your car.

By picking your model from the list above, you gain access to the right technical specifications and our accurate fitment. We are committed to supplying the most relevant range for Polestar's electric lineup, whether you drive a Long Range Dual Motor or a Standard Range variant.

Why shop at CVJoint24?

CVJoint24 is not just another general car-parts retailer; we are a Swedish driveline specialist shipping across Europe from our warehouse in Helsingborg, Sweden. Our philosophy centres on unmatched technical knowledge and a range of extraordinary depth that generic motor factors simply cannot match. When you order from us, you can trust our understanding of the engineering demands placed on modern drivetrains, and our accurate vehicle databases make finding the right part straightforward.

We know that when a car part fails, you need your vehicle back on the road without delay. That is why we focus on swift dispatch to keep your waiting time to an absolute minimum. In addition, our CV joints are backed by a dependable fitment guarantee when ordered against your vehicle's make, model and engine variant. With our focus on quality, speed and specialist expertise, we are the trusted choice for Polestar drivers who refuse to compromise on driving performance.

Frequently Asked Questions about Outer CV Joints for Polestar

How do I know if the outer CV joint on my Polestar is faulty?

The most common sign is a clicking noise when turning, especially under acceleration. You may also notice steering wheel vibrations or see that the CV boot is cracked and leaking grease.

Can I replace just the CV joint, or do I need to replace the complete drive shaft?

On most Polestar models, you can easily replace just the outer CV joint if the drive shaft itself is otherwise undamaged. This is often a much more cost-effective option than replacing the entire shaft assembly.

Does the same CV joint fit all Polestar 2 models?

No, there can be differences depending on whether the car is front-wheel drive or all-wheel drive, as well as battery capacity and model year. Always select your specific model and drivetrain variant to find the exact part you need.

What is included when I buy an outer CV joint from you?

Our outer CV joints are supplied as complete kits. This means you receive the joint itself, a model-specific CV boot, high-grade CV joint grease, clamps, and necessary mounting hardware such as circlips.

Why is it important to use the correct grease in the CV joint?

The CV joint operates under extreme pressure and high temperatures. The supplied specialist grease is formulated to withstand these heavy loads and protect the metal surfaces from wear. Never use ordinary general-purpose grease.

Do you offer a fitment guarantee on Polestar parts?

Yes, we offer a strict fitment guarantee. If you select your car's correct make, model, and engine variant in our vehicle selector and order the recommended part, we guarantee it will fit your vehicle.