Outer CV joints for Toyota Carina E

Looking for a new outer CV joint for your Toyota Carina E? As a Swedish driveline specialist, we offer a carefully selected range for this classic model. Finding the correct part is...

Products for Outer CV joints for Toyota Carina E

10 products
1 - 10 of 10
Item no.:0599049
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 56 mm
  • Outer splines: 26
  • ABS teeth: 48
Item no.:0536880
  • Position: Outer
  • Inner splines: 23
  • Seal diameter: 56 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:354611
  • Position: Front, Outer
  • Inner splines: 32
  • Seal diameter: 56 mm
  • Outer splines: 26
  • ABS teeth: 48
Item no.:358989
  • Position: Front, Outer
  • Inner splines: 23
  • Seal diameter: 56 mm
  • Outer splines: 26
  • ABS teeth: 48
Item no.:3592044
  • Position: Front, Outer
  • Inner splines: 24
  • Seal diameter: 56 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:354096
  • Position: Front, Outer
  • Inner splines: 24
  • Seal diameter: 56 mm
  • Outer splines: 26
  • ABS teeth: 48
Item no.:359910
  • Position: Front, Outer
  • Inner splines: 24
  • Seal diameter: 56 mm
  • Outer splines: 26
  • Joint diameter: 84 mm
Item no.:0519964
  • Position: Outer
  • Inner splines: 32
  • Splines wheel side: 26
  • Seal diameter: 56 mm
  • Outer splines: 26
Item no.:0511369
  • Position: Outer
  • Inner splines: 32
  • Seal diameter: 56 mm
  • Outer splines: 26
  • ABS teeth: 48
Item no.:0547685
  • Position: Outer
  • Inner splines: 32
  • Splines wheel side: 26
  • Seal diameter: 56 mm
  • Outer splines: 26

Outer CV joints for Toyota Carina E

The Toyota Carina E is renowned for its reliability, but like any front-wheel-drive car, its drivetrain is subjected to significant stress over time. The outer CV joint is a critical component that transmits power from the gearbox via the drive shaft to the front wheels. At CVJoint24, you will find a wide range of outer CV joints specifically tailored for the Toyota Carina E. Our range covers most engine variants and model years for this classic car. Choosing the right spare part is fundamental to maintaining your car's handling and road safety. We are a Swedish driveline specialist who understands the importance of an exact fit, which is why we provide detailed technical information for every single item to make your selection easier.

What does an outer CV joint do on a Toyota Carina E?

The primary task of the outer CV joint on a Toyota Carina E is to enable power transfer to the wheels while allowing them to steer and move vertically with the suspension. It is a constant velocity joint that ensures rotational speed remains smooth regardless of the wheel's steering angle. Without a functioning outer CV joint, the car could not be steered effectively under acceleration. The joint is mounted on the outboard end of the drive shaft, directly behind the wheel hub, and is protected by a rubber CV boot filled with specialised grease. On the Carina E, this component is particularly exposed because it handles both engine torque and extreme angle changes at full steering lock, placing high demands on material quality and manufacturing precision.

Common signs of wear

The most classic symptom of a worn outer CV joint on a Toyota Carina E is a rhythmic clicking or knocking noise heard when turning sharply, such as when parking or navigating a tight junction. The sound often speeds up with the car's velocity. Another warning sign is vibration through the steering wheel during acceleration, which can indicate that the joint's internal bearing tracks have become uneven. It is also vital to inspect the CV boot regularly; if it splits, grease escapes and road dirt gets in, causing the joint to fail rapidly. If you spot grease splatters on the inside of the wheel rim or across the suspension, it is a clear sign that the boot has torn and that the outer CV joint likely needs inspection or immediate replacement to avoid a total breakdown.

How to choose the correct outer CV joint

Identifying the exact outer CV joint for a Toyota Carina E requires care, as specifications can vary depending on engine size, gearbox type, and whether the vehicle is fitted with ABS brakes. The most important details to check are the number of splines (teeth) on both the inner and outer sections of the joint, as well as the seal diameter. For cars equipped with anti-lock brakes, the joint must also have the correct ABS ring installed. We strongly recommend using our search filter to select your car's make, model, and engine to display the parts compatible with your specific vehicle. This significantly reduces the risk of ordering the wrong part. If in doubt, you can always compare the dimensions of your old component with the technical specifications provided for each product in our shop to ensure you get the right fit straight away.

Related parts to check

It is also worth checking these exact pages for the same vehicle when working on an outer CV joint:

When a drivetrain component shows signs of wear, neighbouring parts on the same car often require attention as well. By checking these exact pages for the Toyota Carina E, it becomes easier to determine whether the issue lies solely with the outer CV joint or another neighbouring component in the driveline.

This is particularly relevant on models where vibrations, play, and noises can transfer symptoms across several driveline components. A quick check of related categories reduces the risk of replacing the right type of part while overlooking an adjacent component that affects the very same issue.

By conducting a comprehensive overhaul of your drivetrain, you ensure that your car remains dependable over many kilometres without unexpected interruptions.

Why shop with CVJoint24?

CVJoint24 is your dedicated expert in everything concerning your car's drivetrain. We combine in-depth technical knowledge with one of the market's most extensive stocks of quality products for the Toyota Carina E. When you shop with us, you receive not only a premium spare part, but also peace of mind from our accurate fitment data when selecting your specific engine and model. We understand how essential your car is to daily life, which is why we process and dispatch orders promptly across the European Union from our Swedish warehouse. As a Swedish driveline specialist, our priority is always providing the right part at competitive prices without compromising on quality. Our aim is to make it as simple and secure as possible for you to maintain your vehicle's power transmission with components built to last.

Frequently asked questions about outer CV joints for Toyota Carina E

How do I know if the outer CV joint on my Toyota Carina E is faulty?

The most common sign is a clicking or knocking noise heard on full steering lock while driving, especially when accelerating through turns.

Do I need to replace both outer CV joints at the same time?

No, it is not necessary to replace both at the same time, but if a CV boot is damaged on one side, there is a high risk that the other side is also worn.

What is normally included in an outer CV joint kit from you?

Our kits usually contain the CV joint itself, a model-specific CV boot, specialised grease, a circlip, and the necessary clamps for a complete installation.

Can I use a CV joint without an ABS ring on a Carina E with ABS?

No, this is not recommended. Without the correct ABS ring, the vehicle's safety system will trigger a fault warning and the ABS function will cease working altogether.

How long does it take to replace an outer CV joint on this model?

For someone with experience and the right tools, the replacement usually takes between 1 and 2 hours per side, depending on how seized the hub nut and splines are.

Why is it important to check the spline count before ordering?

The Toyota Carina E can feature different spline counts depending on the engine and gearbox. By counting the splines or selecting your exact vehicle details, you ensure a precise fit.