Outer CV joints for Toyota Corolla

Find the right outer CV joint for your Toyota Corolla from a comprehensive selection covering petrol, diesel and hybrid models. This category includes components tailored for early 1980s...

Products for Outer CV joints for Toyota Corolla

26 products
1 - 24 of 26
Item no.:0522894
  • Position: Outer
  • Inner splines: 24
  • Seal diameter: 58 mm
  • Outer splines: 26
  • ABS teeth: 48
Item no.:0511696
  • Position: Outer
  • Inner splines: 23
  • Seal diameter: 58 mm
  • Outer splines: 26
  • ABS teeth: 48
Item no.:358082
  • Position: Outer
  • Inner splines: 24
  • Splines wheel side: 26
  • Seal diameter: 58 mm
  • ABS teeth: 48
Item no.:0530765
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 55,6 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:7313883
  • Position: Front, Outer
  • Inner splines: 25
  • Splines wheel side: 26
  • Seal diameter: 63 mm
  • ABS teeth: 48
Item no.:0560199
  • Position: Front, Outer
  • Inner splines: 25
  • Seal diameter: 58 mm
  • Outer splines: 26
  • ABS teeth: 48
Item no.:0584284
  • Position: Outer
  • Inner splines: 23
  • Seal diameter: 56 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:7313863
  • Position: Outer
  • Inner splines: 23
  • Splines wheel side: 26
  • Seal diameter: 56 mm
  • Outer splines: 26
Item no.:0570101
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 63 mm
  • Outer splines: 26
  • ABS teeth: 48
Item no.:352091
  • Position: Front, Outer
  • Inner splines: 23
  • Seal diameter: 56 mm
  • Outer splines: 26
  • ABS teeth: 48
Item no.:0586036
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 61 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:350037
  • Position: Front, Outer
  • Inner splines: 24
  • Seal diameter: 56 mm
  • Outer splines: 26
  • ABS teeth: 48
Item no.:357495
  • Position: Front, Outer
  • Inner splines: 24
  • Seal diameter: 58 mm
  • Outer splines: 26
  • ABS teeth: 48
Item no.:358785
  • Position: Front, Outer
  • Inner splines: 24
  • Seal diameter: 56 mm
  • Outer splines: 26
  • Joint diameter: 84 mm
Item no.:351639
  • Position: Front, Outer
  • Inner splines: 23
  • Seal diameter: 56 mm
  • Outer splines: 26
  • ABS teeth: 48
Item no.:353999
  • Position: Front, Outer
  • Inner splines: 23
  • Seal diameter: 58 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:3504027
  • Position: Outer
  • Inner splines: 23
  • Seal diameter: 61 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:357477
  • Position: Outer
  • Inner splines: 32
  • Splines wheel side: 26
  • Seal diameter: 58 mm
  • ABS teeth: 48
Item no.:358933
  • Position: Front, Outer
  • Inner splines: 29
  • Seal diameter: 56 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:354974
  • Position: Outer
  • Inner splines: 32
  • Splines wheel side: 26
  • Seal diameter: 61,2 mm
  • Splines gearbox side: 26
Item no.:3523234
  • Position: Front, Outer
  • Inner splines: 24
  • Seal diameter: 56 mm
  • Outer splines: 26
  • Thread size: M22X1,5
Item no.:358123
  • Position: Front, Outer
  • Inner splines: 25
  • Splines wheel side: 26
  • Seal diameter: 58 mm
  • ABS teeth: 48
Item no.:3568626
  • Position: Outer
  • Inner splines: 24
  • Seal diameter: 56 mm
  • Outer splines: 26
  • Joint diameter: 85 mm
Item no.:3503457
  • Position: Outer
  • Inner splines: 23
  • Seal diameter: 58 mm
  • Outer splines: 26
  • ABS teeth: 48
Showing 1–24 of 26 products

Outer CV joints for Toyota Corolla

The Toyota Corolla is one of the world's best-selling cars, renowned everywhere for its legendary reliability. Even a dependable Corolla, however, requires routine maintenance of its drivetrain components to retain peak road performance and safety. An outer CV joint is a critical link in the vehicle's power transmission system, frequently subject to substantial stress. At CVJoint24, you will find a carefully curated range of outer CV joints engineered specifically for various generations of the Toyota Corolla. Whether you drive a dependable 1990s model or a modern hybrid, fitting premium-quality components is essential to withstand the mechanical forces exerted during acceleration and tight cornering. We understand the importance of an exact fit, offering parts that meet or exceed original specifications so your car continues to run smoothly for many thousands of kilometres to come.

What does an outer CV joint do on a Toyota Corolla?

The outer CV joint on a Toyota Corolla is positioned at the very end of the drive shaft, directly at the wheel hub. Its primary function is to transmit torque from the gearbox and the rotating drive shaft to the front wheels, while simultaneously allowing the wheels to steer and accommodate vertical suspension travel. This is made possible through a sophisticated ball-joint design, typically a Rzeppa joint, which can articulate at steep angles without interrupting the smooth transfer of power. Without a fully functional outer CV joint, the car could not steer effectively while under power, as torque must be delivered reliably regardless of steering angle. It is a precision-engineered constant velocity joint subjected to enormous mechanical loads whenever you accelerate, making its condition vital for overall vehicle handling and cornering stability.

Common signs of wear

Several distinct warning signs indicate that an outer CV joint on your Toyota Corolla is deteriorating or nearing complete failure. The most common symptom is a rhythmic clicking or snapping noise heard clearly when executing sharp turns at low speeds, such as during parking manoeuvres or turning into junctions. If this noise disappears when you straighten the steering wheel and drive in a straight line, but returns as soon as you turn, it is a classic sign of wear in the joint's internal ball tracks. Another symptom is steering wheel vibration under acceleration. You should also inspect the CV boot regularly; cracked or split rubber allows essential lubricating grease to escape whilst letting in road grime and moisture. If you notice dark grease splatters on the inside of the wheel rim or wheel arch, prompt action is needed before the joint seizes completely.

How to choose the correct outer CV joint

Selecting the correct part for your car can sometimes seem complex, as the Toyota Corolla has been produced across numerous global generations and specifications. Differences often lie in the spline count on both the inner shaft side and the outer hub side, as well as the diameter of the oil seal surface. Furthermore, it is crucial to note whether your car is equipped with ABS, as the outer joint frequently features an integrated reluctor ring for the sensor. To make sure you order the correct outer CV joint, we strongly recommend selecting your vehicle by make, model and engine variant in our catalogue. This filters out incompatible components and displays only the technically accurate options for your specific model year and engine. It saves valuable installation time and eliminates the risk of ordering incorrect car parts.

Related parts to check

Be sure to inspect these related parts for the same vehicle when working on the outer CV joint:

When a drivetrain component exhibits wear, adjoining parts on the vehicle often warrant a thorough inspection too. By comparing these relevant categories for your Toyota Corolla, you can readily determine whether the issue lies purely within the outer CV joint or another interconnected section of the driveline.

This is especially important on models where vibrations, play and unwanted noises can transfer symptoms across several driveline components. Checking related categories minimises the risk of replacing the intended part while overlooking a neighbouring component that contributes to the very same problem.

Remember to always fit new hub axle nuts and pack the joint with high-grade CV grease, which is usually supplied in our comprehensive kits to guarantee lasting reliability after your repair.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, operating with its central warehouse in Helsingborg, Sweden. Over the years, we have built up extensive technical expertise and a product catalogue focused on premium quality and exacting precision. When you shop with us, you receive not just dependable spare parts, but also the confidence that comes with a team that understands the unique technical demands of the Toyota Corolla drivetrain. Our user-friendly vehicle selector by make, model and engine removes the guesswork, ensuring you get the exact fit your car requires. We maintain generous stock levels to guarantee swift, dependable delivery across the EU, helping you get your car back on the road without delay. Our goal is to provide the finest blend of specialist knowledge, product reliability and value for every motorist requiring dependable driveline parts.

Frequently asked questions about outer CV joints for Toyota Corolla

How do I know if the outer CV joint fits my Toyota Corolla?

The easiest and most reliable method is to select your Toyota Corolla's model year and engine variant in our vehicle selector. Because the Corolla spans many generations with varying spline counts, selecting your exact model ensures you find the right specification for your car.

Why is there a clicking noise when I turn in my Corolla?

A rhythmic clicking or popping noise when making sharp turns is the classic symptom of a worn outer CV joint. It usually occurs when the internal bearings wear grooves into the tracks due to a lack of lubrication or high mileage.

What is included when I buy an outer CV joint kit from you?

Our CV joint kits come complete for straightforward installation. They typically include the constant velocity joint itself, a new CV boot, high-performance CV grease, circlips, clamps, and a new axle nut or bolt depending on the model.

Can I replace only the CV boot if the joint is not making noise yet?

Yes, if you catch a split or torn CV boot early before road dirt penetrates and damages the joint, replacing just the boot and repacking it with fresh grease can significantly extend the joint's working life.

Do I need an outer CV joint with an ABS ring for my Toyota Corolla?

That depends on whether your vehicle is fitted with ABS brakes and where the wheel speed sensor takes its reading. If your current CV joint features a toothed reluctor ring, your new replacement must have one too for the ABS system to work properly.

Is it difficult to replace the outer CV joint yourself?

It requires appropriate tools and some mechanical experience. You will need to release the wheel hub and occasionally loosen suspension components to remove the drive shaft. For a confident DIY mechanic with the right equipment, it is a very manageable job.

What are the symptoms of a damaged ABS ring on the CV joint?

If the ABS ring on the CV joint cracks or corrodes, it can trigger the ABS warning light on your dashboard or cause the ABS system to intervene unexpectedly during gentle braking at low speeds due to a distorted sensor signal.