Outer CV joints for Volvo S60 3.0 T AWD

Find the right outer CV joint for your Volvo S60 3.0 T AWD here. This category is dedicated to this specific all-wheel-drive saloon to make your search effortless. To ensure perfect...

Products for Outer CV joints for Volvo S60 3.0 T AWD

3 products
1 - 3 of 3
Item no.:0581885
  • Position: Outer
  • Seal diameter: 57,5 mm
  • Inner splines: 26
  • Outer splines: 40
Item no.:658402
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88
Item no.:0511588
  • Position: Outer
  • Inner splines: 22
  • Outer diameter: 84 mm
  • Splines wheel side: 36
  • ABS teeth: 44

Outer CV joints for Volvo S60 3.0 T AWD

Maintaining the drivetrain on a high-performance car like the Volvo S60 3.0 T AWD is essential for preserving both driving dynamics and safety. The outer CV joint is one of the most heavily stressed components in the car's power transmission, especially on all-wheel-drive models where torque is distributed across all four wheels. A defective CV joint can, at worst, lead to total breakdown, making it vital to act as soon as the first symptoms appear. We offer carefully selected CV joints that satisfy the stringent demands for material strength and precision required by this specific engine variant.

Our range is engineered to withstand the stresses that arise during spirited driving and varying road conditions. Because the Volvo S60 3.0 T AWD features an advanced drivetrain, it is crucial that replacement parts match original equipment standards. By choosing the correct components, you ensure that engine power reaches the wheels efficiently without unnecessary friction or unwanted noises. We help you find the right part quickly and easily through our database.

What does the outer CV joint do on a Volvo S60 3.0 T AWD?

The primary task of the outer CV joint is to transfer rotational energy from the drive shaft to the front wheels, whilst allowing the wheels to steer and move vertically with the suspension. On a Volvo S60 3.0 T AWD equipped with all-wheel drive, the front outer constant velocity joints operate under continuous load to cope with steering angles as well as powerful acceleration from the turbocharged engine. Without a functioning CV joint, power delivery is severed and the car loses its ability to manoeuvre completely.

The design is based on a constant velocity joint, which ensures a uniform rotational speed regardless of the angle of the wheel. This is particularly vital for ride comfort, as it eliminates vibrations through the steering wheel when cornering. For the AWD system, it is also critical that all drivetrain components work in harmony to prevent damage to the differential or other sensitive assemblies. A high-quality CV joint minimises the risk of future problems throughout the entire power transmission system.

Common signs of wear

The classic indicator of a worn outer CV joint is a rhythmic clicking or knocking noise heard when turning sharply, such as during parking manoeuvres or navigating tight junctions. The sound typically speeds up with vehicle speed and often becomes louder under load. If you notice that the noise disappears when driving straight ahead but returns the moment you turn the steering wheel, this is a very strong sign that the outer joint requires prompt replacement.

Another common symptom is vibration felt through the steering wheel or car chassis during acceleration. This can occur when the CV joint develops play or when grease has leaked out through a damaged CV boot. If the boot splits, dirt and water penetrate the joint, quickly destroying the precision-machined surfaces inside. Regularly check that the drive shaft boots are intact and that there are no traces of grease on the inside of the road wheels or around the wheel arches.

How to choose the correct outer CV joint

When purchasing a replacement outer CV joint for your Volvo S60 3.0 T AWD, several technical specifications must align. These include the spline count on both the inner and outer sections of the joint, as well as whether the car is fitted with a specific type of ABS ring. Because the 3.0 T AWD model frequently features heavier-duty dimensions than smaller engine variants, you cannot assume a standard joint will fit. An incorrect fit means the component cannot be installed or may cause damage to the wheel hub.

The most dependable way to select the right part is to use our vehicle selector to choose your car's exact make, model and engine. This filters out the components technically verified for your specific model variant. We also recommend checking whether the CV joint is supplied as a complete kit with a CV boot, grease and mounting hardware, which simplifies the replacement considerably. Investing in a part with guaranteed fitment saves both time and money, sparing you unwanted returns and repeat garage visits.

Related parts to inspect

Please also check these exact pages for the same vehicle when working on the outer CV joint:

When a driveline component shows signs of wear, neighbouring parts on the same car often require inspection too. By checking these exact pages for the Volvo S60 3.0 T AWD, it becomes much easier to determine whether an issue lies purely within the outer CV joint or in another connected section of the drivetrain.

This is especially relevant on models where vibrations, play and unusual noises can transfer symptoms across several parts within the same drivetrain. A quick check of related categories reduces the risk of replacing the correct component type while overlooking an adjacent part that contributes to the very same symptom.

While you are working on the outer CV joint, it is an ideal opportunity to inspect the rest of the drivetrain. Often, a defect in one component indicates that adjoining parts are also beginning to wear. For a Volvo S60 3.0 T AWD, it is particularly important to confirm that the complete drive shaft is straight and true, and that the propeller shaft shows no sign of imbalance or play in its joints.

Here are the key related categories for your car:

  • Volvo S60 3.0 T AWD – Overview of all available driveline parts for your model.
  • Drive shafts for Volvo S60 3.0 T AWD – If vibrations persist, the complete driveshaft may require replacement.
  • Inner CV joints for Volvo S60 3.0 T AWD – Check this component if you experience vibrations under straight-line acceleration.
  • Propeller shafts for Volvo S60 3.0 T AWD – A central part of the all-wheel-drive system that should be inspected for play.

Why shop with CVJoint24

CVJoint24 is your dedicated specialist for all driveline components. We understand the technical nuances of marques like Volvo and know exactly what is required for a Volvo S60 3.0 T AWD to deliver peak performance. By focusing deeply on drivetrain parts, we offer expert advice that general car parts retailers rarely match. Our aim is to ensure you always receive the right product first time, backed by our accurate fitment criteria when you filter by make, model and engine.

We combine technical know-how with reliable logistics, dispatching rapidly across the EU from our Swedish central warehouse. When you buy from us, you can trust that you are getting high-calibre components engineered to endure. As the international store of an established Swedish driveline specialist, we help drivers keep their vehicles in top condition with premium parts at sensible prices. Choose us for a secure purchase and a driveline that performs for many thousands of kilometres.

Frequently asked questions about outer CV joints for Volvo S60 3.0 T AWD

What are the most common symptoms of a failing outer CV joint on a Volvo S60 3.0 T AWD?

The most common sign is a clicking noise when turning on full lock while driving. Vibrations in the steering wheel and grease splattered on the inside of the wheel rim (from a split CV boot) are also clear warning signs.

Does the same outer CV joint fit all Volvo S60 models?

No, CV joints vary depending on engine variant, gearbox and whether the car has AWD. The 3.0 T AWD often has specific dimensions and spline counts, so always select your car's make, model and engine to find the right part.

Are the CV boot and grease included when I buy an outer CV joint from you?

Yes, our CV joints are normally supplied as complete kits containing the joint itself, a model-specific CV boot, high-quality CV joint grease, and the necessary clips and bolts.

Can I replace just the outer CV joint, or do I have to replace the complete drive shaft?

On the Volvo S60 3.0 T AWD, you can easily replace just the outer CV joint if the drive shaft bar itself is undamaged. This is a cost-effective way to repair the drivetrain.

Why is it important to replace a worn CV joint promptly?

A broken CV joint can seize or snap completely, leaving the car undriveable. In addition, vibrations from a worn constant velocity joint can damage wheel bearings and the gearbox over time.

How do I know that the CV joint will fit my car?

We offer a guaranteed fit when you select your vehicle's exact make, model and engine. This ensures that all technical specifications match your specific car configuration.