Outer CV joints for Volvo S80 1.6 Drive

Looking for an outer CV joint for your Volvo S80 1.6 Drive? This page brings together parts for the front-wheel-drive saloon. Simply choose your make, model and engine to confirm exact...

Products for Outer CV joints for Volvo S80 1.6 Drive

4 products
1 - 4 of 4
Item no.:0582787
  • Position: Outer
  • Seal diameter: 58 mm
  • Inner splines: 28
  • Outer splines: 40
  • Joint diameter: 92 mm
Item no.:650117
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88
Item no.:0537459
  • Position: Outer
  • Inner splines: 26
  • Outer diameter: 91 mm
  • Splines wheel side: 40
Item no.:0542504
  • Position: Outer
  • Seal diameter: 57,5 mm
  • Inner splines: 26
  • Outer splines: 40

Outer CV joints for Volvo S80 1.6 Drive

The Volvo S80 1.6 Drive is renowned for its fuel efficiency and refined comfort, but like all front-wheel-drive cars, its outer CV joints are subjected to significant mechanical stress over the vehicle's lifespan. The outer CV joint is a crucial link in the drivetrain, engineered to manage engine torque alongside the complex angles produced during steering and suspension movements. At CVJoint24, you will find carefully selected car parts tailored to the precise technical demands of your Volvo S80 1.6 Drive. We supply components that meet or exceed original equipment standards to ensure your car retains its reliability and driving pleasure. Choosing the correct quality from the outset avoids consequential damage to other drivetrain components, saving both time and money in the long run.

What does the outer CV joint do on a Volvo S80 1.6 Drive?

The primary job of the outer CV joint on a Volvo S80 1.6 Drive is to transfer rotational force from the drive shaft smoothly to the front wheels. What makes this outer constant velocity joint technically demanding compared to an inner CV joint is its ability to operate at wide articulation angles, which are vital when steering. Without an intact CV joint, power cannot reach the driven wheels properly, resulting in jerky delivery or a vehicle that cannot be driven at all. The joint is sealed within a protective rubber CV boot packed with high-grade specialised grease. This lubricant is vital to minimise friction and heat build-up, while the boot acts as a robust barrier against grit, road salt, and moisture that would rapidly ruin the hardened steel surfaces inside the joint.

Common symptoms of wear

There are several distinct warning signs indicating that an outer CV joint on your Volvo S80 is nearing the end of its service life. The most frequent symptom is a rhythmic clicking, knocking, or popping noise that is most noticeable at full steering lock, such as when parking or pulling away through a tight junction under throttle. If the noise vanishes when travelling in a straight line but reappears whenever the wheels are turned, it points directly to wear in the internal ball tracks of the outer joint. Other warning signs include vibrations through the steering wheel or dark grease splattered inside the wheel rim and arch. Leaking grease reveals a split or torn CV boot—the leading cause of premature constant velocity joint failure, as the grease escapes and contaminants enter.

How to select the right outer CV joint

Selecting the correct spare parts for the 1.6 Drive variant of the Volvo S80 is essential, as its technical specifications often differ from the more powerful engine options across the model range. When picking an outer CV joint, check key measurements including the spline counts on both the shaft side and the wheel hub side, as well as the exact diameter of the oil seal collar. You must also check whether your car requires an integral ABS ring on the joint or relies on a magnetic wheel bearing sensor. To avoid doubt and ensure a perfect fit, always select your Volvo S80 1.6 Drive using our make, model, and engine selector. This ensures you find the exact outer CV joints engineered for your vehicle's setup, giving you complete confidence during installation.

Related parts to inspect

We recommend checking these exact pages for your vehicle when working on the outer CV joint:

When one drivetrain component wears out, surrounding parts on the same car often warrant a thorough check. By reviewing these specific pages for the Volvo S80 1.6 Drive, it is simpler to tell whether an issue stems strictly from the outer CV joint or another nearby section of the drivetrain.

This is especially important on models where vibrations, play, and noises can travel between multiple parts. A quick inspection of related categories ensures you don't replace one component while overlooking another that contributes to the very same problem.

By proactively inspecting these parts and replacing them alongside the outer joint whenever necessary, you help keep your Volvo quiet, safe, and dependable for many thousands of kilometres to come.

Why shop with CVJoint24?

CVJoint24 is your specialist supplier for high-quality vehicle drivetrain components across the European Union. As the international shop of an established Swedish driveline specialist based in Helsingborg, Sweden, we provide product depth and technical expertise rarely found at general car-parts factors. We know your time is valuable and accurate fitment is essential for any successful garage job, which is why we offer an extensive fitment guarantee across our entire range. Backed by thorough Volvo technical expertise, premium manufacturing standards, and fast international dispatch, we strive to be the top choice for car owners and DIY mechanics alike. When you order from us, you get the correct component, knowledgeable support, and a dependable service to get your Volvo S80 1.6 Drive back on the road without hassle.

Frequently asked questions about outer CV joints for Volvo S80 1.6 Drive

How do I know if the outer CV joint fits my Volvo S80 1.6 Drive?

The most reliable way is to select your vehicle's exact make, model and engine variant in our menu. This filters our range so that you only see the parts that are technically verified for your specific car.

What are the most common symptoms of a failing outer CV joint?

The most common signs are a clicking noise when cornering, vibrations through the steering wheel under acceleration, and visible grease leaking from a split CV boot.

Can I replace just the boot if the CV joint is still working?

Yes, if you catch damage to the boot early before dirt and moisture have penetrated to damage the joint itself, replacing the CV boot and repacking it with fresh grease may be sufficient.

Why is there a clicking noise when I turn in my Volvo S80?

The clicking noise is typically caused by the steel balls inside the outer CV joint wearing out their tracks, creating play that is most noticeable when the joint operates at an angle.

Are fitting accessories such as grease and clamps included?

Yes, our complete outer CV joint kits normally include the matching CV boot, high-grade molybdenum grease, circlips and retaining clamps to make installation straightforward.

How quickly can I get my new CV joint delivered?

We dispatch quickly across Europe from our central Swedish warehouse, helping you get your car repaired and back on the road without unnecessary delay.