Outer CV joints for Volvo V70

Our range covers multiple Volvo V70 generations, from early petrol engines to later diesel and Flexifuel variants. Whether your car is front-wheel drive or equipped with AWD, we supply...

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Outer CV joints for Volvo V70

222 products
1 - 24 of 222
Item no.:0529385
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 33
  • Outer splines: 36
Item no.:657633
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88
Item no.:0535488
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 25
  • Outer splines: 26
Item no.:0552380
  • Position: Outer
  • Seal diameter: 58 mm
  • Inner splines: 28
  • Outer splines: 40
  • Joint diameter: 92 mm
Item no.:0544305
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 57 mm
  • Inner splines: 28
  • Outer splines: 40
Item no.:0529526
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 27
  • Outer splines: 36
Item no.:0213756
  • Position: Outer
  • Seal diameter: 56 mm
  • Inner splines: 25
  • Outer splines: 40
Item no.:0578575
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 28
  • Outer splines: 26
Item no.:0549431
  • Position: Outer
  • Seal diameter: 56 mm
  • Inner splines: 28
  • Outer splines: 26
  • Joint diameter: 96 mm
Item no.:0594543
  • Position: Outer
  • Inner splines: 33
  • Outer diameter: 88 mm
  • Splines wheel side: 36
  • ABS teeth: 48
Item no.:0526497
  • Position: Outer
  • Inner splines: 26
  • Outer diameter: 91 mm
  • Splines wheel side: 40
Item no.:0549826
  • Position: Outer
  • Inner splines: 27
  • Outer diameter: 100 mm
  • Splines wheel side: 36
  • ABS teeth: 48
Item no.:0520056
  • Position: Outer
  • Inner splines: 26
  • Outer diameter: 94 mm
  • Splines wheel side: 40
Item no.:3511174
  • Position: Front, Outer
  • Inner splines: 28
  • Outer diameter: 92 mm
  • Splines wheel side: 40
Item no.:0592172
  • Position: Outer
  • Inner splines: 26
  • Outer diameter: 91 mm
  • Splines wheel side: 40
Item no.:0519886
  • Position: Outer
  • Inner splines: 29
  • Outer diameter: 73 mm
  • Splines wheel side: 36
  • ABS teeth: 44
Item no.:0589071
  • Position: Outer
  • Inner splines: 22
  • Outer diameter: 84 mm
  • Splines wheel side: 36
  • ABS teeth: 44
Item no.:6575117
  • Position: Rear, Outer
Item no.:0541825
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 33
  • Outer splines: 36
Item no.:652884
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88
Item no.:0504313
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 25
  • Outer splines: 26
Item no.:0567486
  • Position: Outer
  • Seal diameter: 57,5 mm
  • Inner splines: 26
  • Outer splines: 40
Item no.:0507149
  • Position: Outer
  • Seal diameter: 57 mm
  • Inner splines: 27
  • Outer splines: 40
  • Joint diameter: 100 mm
Item no.:0513085
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 56 mm
  • Inner splines: 27
  • Outer splines: 36
Showing 1–24 of 222 products

Outer CV joints for Volvo V70

The Volvo V70 is one of Sweden's most iconic vehicle models, celebrated for its practicality, safety, and reliability on European roads. To preserve its renowned driving dynamics and roadholding, every component in the drivetrain must be kept in peak condition. The outer CV joint is a crucial link in this assembly, especially on an estate frequently used for heavy payloads, family holidays, or daily commuting in all weather. At CVJoint24, you will find a dedicated range of outer CV joints engineered specifically for the various generations of the V70.

With 118 different options in stock, we cover everything from the earliest production years right through to the final editions. Every component in our catalogue is thoroughly vetted to meet or exceed original equipment specifications, giving you complete confidence in your replacement parts. As specialists, we understand that a Volvo V70 places demanding loads on its power transmission, and we provide extensive technical expertise to help you identify the exact replacement part for your car.

What does the outer CV joint do on a Volvo V70?

The primary job of the outer CV joint on a Volvo V70 is to transfer drive torque from the gearbox and drive shaft to the front wheels, all while allowing the wheels to steer and the suspension to travel freely. It is a sophisticated component—typically a Rzeppa constant velocity joint—designed to handle substantial operating angles without loss of power or excess vibration. Because the V70 is primarily front-wheel drive (or all-wheel drive on AWD specifications), the outer joints endure considerable stress under heavy acceleration and cornering.

Without an intact CV joint, drive to the wheels is lost completely, which can leave you stranded or cause collateral damage to surrounding suspension components. The joint acts as an articulating pivot, absorbing the continuous movement between the fixed transmission and the moving wheel hub. Understanding its vital function explains why build quality and precision dimensions are critical when replacing it. A top-grade joint minimises friction and ensures engine power is transferred smoothly to the road.

Common signs of wear

A failing outer CV joint on your Volvo V70 produces clear warning signs before total failure. The most frequent symptom is a rhythmic clicking or knocking noise when cornering sharply, such as during tight parking manoeuvres or navigating roundabouts. This sound usually quickens with road speed and fades away once driving in a straight line. You may also feel vibrations through the steering wheel under hard acceleration, indicating that excessive play has developed within the internal bearing tracks.

Regular inspection of the protective CV boot is equally important. If the rubber boot splits or tears, the vital lubricating grease escapes while grit, road grime, and water penetrate the joint. This mixture creates an abrasive paste that quickly destroys the precision-hardened bearing surfaces. Grease splattered across the inside of the wheel rim or wheel arch is a clear warning that the boot has failed. Replacing a split boot early can sometimes save the joint, but once clicking noises appear, the joint itself is almost always worn beyond recovery.

How to choose the correct outer CV joint

Selecting the correct part for a Volvo V70 requires care, as configurations vary depending on the engine, gearbox, and chassis breaks. CV joints differ primarily by their spline counts (the number of teeth) on both the internal shaft fitting and the outer stub axle entering the wheel hub. Furthermore, certain models feature an integrated ABS ring directly on the joint body, whereas others use magnetic wheel bearings. To ensure you order the right part first time, simply select your car's make, model, and engine variant in our catalogue.

Our selector narrows down the 118 relevant products for your vehicle. We always advise cross-referencing key dimensions, such as the outer diameter and tooth count, especially if the car has undergone mechanical changes or was registered in a transitional production year. Be sure to note whether your V70 is fitted with a manual or automatic gearbox, as this frequently alters the drive shaft dimensions and outer joint specifications. At CVJoint24, we provide comprehensive technical data to ensure you find the right fit straight away.

Related parts to inspect

We recommend checking these related categories for the same car when replacing an outer CV joint:

When one drivetrain component shows signs of wear, neighbouring parts on the same vehicle should be inspected as well. Cross-referencing these related categories for the Volvo V70 makes it easy to confirm whether the issue lies purely with the outer CV joint or with an adjoining section of the transmission.

This is particularly useful on models where vibrations, play, and noises can travel between several driveline components. Checking related parts reduces the risk of fitting the correct component while overlooking an adjacent worn part that contributes to the same mechanical issue.

Inspecting these components at the same time saves both garage labour and downtime. A thorough inspection of your driveline ensures dependable power delivery and prevents you from having to strip down the suspension a second time in the near future.

Why buy from CVJoint24?

CVJoint24 is your dedicated specialist for all automotive power transmission components. Backed by our Swedish driveline expertise and central warehouse in Helsingborg, Sweden, we supply parts tailored to the high demands of European driving conditions and diverse vehicle fleets. Our commitment to verified technical fitment and high-grade manufacturing means you can order with absolute peace of mind. With extensive warehouse stock and fast international delivery across the EU, we help get your Volvo V70 back on the road safely and without delay.

We combine in-depth product knowledge with an intuitive shop where choosing your make, model, and engine makes finding the right part straightforward. By choosing us, you benefit from years of specialist knowledge in car parts and driveline engineering. We know what it takes to keep your Volvo running smoothly, and we never compromise on product quality. Rely on CVJoint24 for your driveline parts.

Frequently asked questions about outer CV joints for Volvo V70

How do I know whether the outer or inner CV joint has failed on my Volvo V70?

A worn outer CV joint typically makes a clicking noise during sharp turns. In contrast, a failing inner CV joint causes vibrations through the car under acceleration, but usually stays quiet when cornering.

Can I replace just the boot if the CV joint still feels fine?

Yes, if you catch a split CV boot early and the joint has not started making noises or ingested dirt, cleaning, repacking with grease and fitting a new boot may be sufficient.

Do I need a wheel alignment after replacing the outer CV joint on my V70?

Normally, a wheel alignment is not necessary if you only disconnect the ball joint or suspension strut without altering the adjustment bolts, though it is always sensible to check tyre wear afterwards.

Is the ABS ring always mounted on the outer CV joint on a Volvo V70?

On many earlier model years of the V70, the ABS ring is pressed directly onto the outer CV joint. On later models, the ABS sensor may instead read from a magnetic reluctor ring built into the wheel bearing.

What tools are needed to replace a CV joint on a Volvo V70?

You generally need a heavy-duty socket for the centre hub bolt or nut, tools to release the lower ball joint, and dedicated CV boot clamp pliers to tension the new boot clips correctly.

Why are there so many different CV joint variants for the V70?

This is because the Volvo V70 was produced across several generations with a wide variety of engines, different gearboxes (manual/automatic), and both front-wheel drive and all-wheel drive (AWD).

How long does it take to replace an outer CV joint yourself?

For an experienced DIY mechanic, replacement usually takes between 1 and 2 hours per side, provided no bolts are seized with rust.