Outer CV joints for Volvo XC60 T6 AWD

Looking for outer CV joints for your Volvo XC60 T6 AWD? This range is tailored to the all-wheel-drive chassis of this estate SUV, ensuring you quickly find the correct technical fitment...

Products for Outer CV joints for Volvo XC60 T6 AWD

9 products
1 - 9 of 9
Item no.:0534951
  • Position: Outer
  • Seal diameter: 57,5 mm
  • Inner splines: 27
  • Outer splines: 40
Item no.:657782
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88
Item no.:157461
  • Position: Front, Outer
  • Inner splines: 40
  • Total length: 116 mm
Item no.:0586574
  • Position: Outer
  • Inner splines: 29
  • Outer diameter: 73 mm
  • Splines wheel side: 36
  • ABS teeth: 44
Item no.:350731
  • Position: Front, Outer
  • Total length: 118 mm
Item no.:652675
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88
Item no.:154316
  • Position: Front, Outer
  • Inner splines: 40
  • Total length: 116 mm
Item no.:659164
  • Position: Rear, Outer
  • Seal diameter: 56 mm
  • Inner splines: 29
  • Diameter: 56 mm
  • ABS teeth: 88
Item no.:153529
  • Position: Front, Outer
  • Inner splines: 40
  • Total length: 116 mm

Outer CV joints for Volvo XC60 T6 AWD

Maintaining the drivetrain on a Volvo XC60 T6 AWD demands components capable of handling the high power output and torque delivered by the AWD system. The outer CV joint is a critical link in this system, transmitting power from the drive shaft to the front wheels while allowing for steering angles and suspension travel. For a heavy, powerful SUV such as the XC60, the stresses on these joints are substantial, especially under hard acceleration and sharp cornering. We supply outer CV joints specifically engineered to match the technical specifications of your Volvo XC60 T6 AWD, ensuring lasting durability and reliability in all weather conditions.

When choosing car parts from us, you can rest assured they meet or exceed original equipment standards. A Volvo XC60 with the T6 engine places severe demands on material selection and manufacturing tolerances. Our constant velocity joints are built to cope with the articulation angles and dynamic loads generated by a modern SUV chassis, minimising the risk of premature failure and guaranteeing smooth, vibration-free running.

What does the outer CV joint do on a Volvo XC60 T6 AWD?

Positioned right at the wheel hub, the outer CV joint is a constant velocity joint designed to transmit driving torque evenly regardless of steering angle. On a Volvo XC60 T6 AWD, this outer joint operates in tandem with the sophisticated all-wheel-drive system to deliver power seamlessly to the road surface. Without a properly functioning CV joint, the vehicle could not turn under power without severe binding, vibration and steering feedback.

The joint is protected by a flexible rubber CV boot that retains lubricating grease whilst keeping out road dirt, moisture and salt. Maintaining this barrier is vital to prevent accelerated wear to the internal raceways and bearings. For vehicles driven in challenging European winter conditions, the quality of the CV boot is just as critical as the joint itself, as a minor split can quickly allow grease to escape and cause the joint to seize. Understanding this function highlights why fitting high-quality replacement parts is essential.

Common signs of wear

The classic symptom of a worn outer CV joint is a rhythmic clicking or knocking noise when cornering, particularly when applying throttle. For Volvo XC60 T6 AWD owners, this is typically most noticeable during low-speed parking manoeuvres or turning into tight junctions. If the noise disappears in a straight line but returns on lock, the outer joint is almost certainly failing.

Other common symptoms include steering wheel vibrations at speed or a perceptible shudder through the chassis under acceleration. If the boot has split, grease will be thrown out, often leaving dark grease splatters across the inside of the wheel rim or wheel arch lining. Prompt inspection and replacement are crucial to prevent secondary damage to adjacent driveline parts, such as the wheel bearings or gearbox. Ignoring a worn constant velocity joint can ultimately cause catastrophic mechanical failure, leaving you without drive.

Choosing the correct outer CV joint

Selecting the exact replacement part for a Volvo XC60 requires care, as technical specifications can vary depending on model year, engine variant and chassis number. For the T6 AWD variant, it is essential to verify the spline count on both the inner spline (connecting to the drive shaft) and the outer spline (engaging the wheel hub). The simplest way to find the correct fitment is to filter our catalogue by your vehicle's make, model and engine, displaying the outer CV joints engineered specifically for your car.

You should also verify your vehicle's ABS reluctor ring arrangement, as some variants use an integrated ring on the CV joint body whilst others incorporate a sensor ring directly into the hub bearing. By cross-referencing dimensions and technical data in our product listings with your existing part, you can be entirely confident of a correct installation. We provide clear technical specifications whether you are a competent DIY mechanic or supplying parts to your local garage.

Related components to inspect

We recommend also checking these exact pages for the same vehicle when working on the outer CV joint:

When a driveline component shows signs of wear, neighbouring drivetrain parts on the vehicle often warrant a thorough check. By cross-referencing these specific pages for the Volvo XC60 T6 AWD, it is easier to confirm whether a fault lies purely in the outer CV joint or within an adjacent section of the drivetrain.

This is especially important on four-wheel-drive models, where vibrations, play and mechanical noises can travel through connected components. A quick review of related categories helps you avoid replacing the correct part while missing a connected component that contributes to the same underlying problem.

Inspecting these related components simultaneously reduces repeat garage visits and ensures your Volvo drives with the refinement it was designed for. A properly maintained drivetrain is essential to preserving the ride comfort and safety expected of the Volvo XC60.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching directly from our central warehouse in Helsingborg, Sweden. We combine in-depth technical expertise with a strictly curated range so you always receive the right spare parts. When ordering from us, you benefit not only from high-specification car parts, but also from the peace of mind offered by our fitment guarantee. Your Volvo XC60 T6 AWD demands robust engineering, which is why we partner exclusively with proven manufacturers.

With prompt delivery across the EU and dedicated customer support from driveline specialists, we ensure your vehicle is returned safely to the road without delay. We strive to make maintaining your vehicle straightforward by offering accurate product specifications and reliable advice. Our specialist focus gives us a depth of stock and technical know-how that general motor factors rarely match, making CVJoint24 the trusted choice for your driveline repairs.

Frequently asked questions about outer CV joints for Volvo XC60 T6 AWD

How do I know if the CV joint fits my Volvo XC60 T6 AWD?

The most reliable way is to select your vehicle by make, model and engine variant in our search. We have carefully cross-referenced our parts with Volvo's specifications for the T6 AWD model to ensure a precise fit.

What are the most common symptoms of a worn outer CV joint?

A clicking or popping sound when cornering on full lock is the most typical symptom. You may also notice vibrations under acceleration or find that grease has leaked out from a split CV boot.

Are fitting accessories such as grease and clips included?

Yes, our outer CV joints are supplied as complete kits including CV grease, a boot, retaining clamps and, in most cases, the centre bolt or axle nut.

Is it difficult to replace an outer CV joint on an XC60 yourself?

It requires competent mechanical knowledge and the correct tools, such as a suitable puller and a torque wrench. It is well within the scope of an experienced DIY mechanic, but we always recommend consulting the vehicle's workshop manual.

What does your fitment guarantee mean?

Our fitment guarantee means that if you have selected your exact vehicle model and engine and a part we recommended does not fit, we will help you find the correct part with no extra charge for return shipping.

How quickly can I have my new CV joint delivered?

We dispatch quickly across Europe from our Swedish warehouse for orders placed before our weekday cut-off time, keeping downtime in the garage to a minimum.