Peugeot 208

Spare parts and drivetrain components for the Peugeot 208.

Products for Peugeot 208

75 products
49 - 72 of 75
Item no.:1106287
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 642 mm
  • Joint diameter: 86 mm
Item no.:216322
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 880 mm
  • Joint diameter: 86 mm
Item no.:0550502
  • Position: Front, Outer
  • Inner splines: 34
  • Seal diameter: 48,1 mm
  • Outer splines: 21
  • Thread size: M20X1,5
Item no.:148169
  • Position: Front left, Inner
  • Inner splines: 34
  • Splines gearbox side: 24
  • Seal diameter: 40 mm
  • Total length: 142,5 mm
Item no.:357987
  • Position: Front, Outer
  • Inner splines: 24
  • Splines wheel side: 25
  • Seal diameter: 56 mm
  • Thread size: M24X1,5
Item no.:354799
  • Position: Front, Outer
  • Inner splines: 34
  • Splines wheel side: 25
  • Seal diameter: 54,8 mm
  • Thread size: M24X1,5
Item no.:3555715
  • Position: Front, Outer
  • Inner splines: 34
  • Seal diameter: 58,5 mm
  • Outer splines: 25
  • ABS teeth: 48
Item no.:215835
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 940 mm
  • Joint diameter: 86 mm
Item no.:112701
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 21
  • Total length: 629 mm
  • Seal ring diameter: 49 mm
Item no.:215935
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 21
  • Seal ring diameter: 49 mm
Item no.:0529039
  • Position: Outer
  • Inner splines: 21
  • Splines wheel side: 21
  • Outer diameter: 75 mm
  • Outer splines: 21
Item no.:211751
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 21
  • Total length: 866 mm
Item no.:212947
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 890 mm
  • Diameter 1: 86 mm
Item no.:116056
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 662 mm
  • Diameter 1: 86 mm
Item no.:248669
  • Position: Front right, Inner
  • Inner splines: 34
  • Splines gearbox side: 24
  • Seal diameter: 29,8 mm
  • Total length: 379 mm
Item no.:352995
  • Position: Front, Outer
  • Inner splines: 34
  • Splines wheel side: 25
  • Seal diameter: 58,5 mm
  • Total length: 55,5 mm
Item no.:359829
  • Position: Front, Outer
  • Inner splines: 30
  • Seal diameter: 58,5 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:1165017
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
Item no.:0677762
  • Total length: 100 mm
Item no.:214076
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 775 mm
  • Diameter 1: 76 mm
  • Diameter 2: 69 mm
Item no.:0610387
  • Outer diameter: 22 mm
  • Diameter: 76 mm
  • Height: 120 mm
Item no.:112384
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Inner splines: 30
  • Total length: 638 mm
  • Joint diameter: 76 mm
Item no.:111859
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 655 mm
  • Joint diameter: 86 mm
  • Joint diameter, gearbox side: 80 mm
Item no.:247266
  • Position: Inner
  • Inner splines: 34
  • Splines gearbox side: 24
  • Total length: 380 mm
Showing 49–72 of 75 products

Drivetrain for Peugeot 208

The Peugeot 208 is a modern, popular supermini that places high demands on its drivetrain to deliver the characteristic driving pleasure and efficiency the model is known for. The power transmission is a critical part of the car's mechanics, and keeping your Peugeot 208 running safely requires top-quality components. At CVJoint24, you will find a dedicated range of carefully selected products tailored directly to this model. We understand that every detail counts, from the smallest circlip to the complete shaft, and our goal is to supply parts that match or exceed original specifications.

Maintaining the drivetrain on a compact car like the Peugeot 208 is vital to prevent unnecessary wear on other vehicle components, such as the gearbox and wheel bearings. Choosing the right spare parts not only ensures your car's reliability, but also protects its resale value. Our range is developed to meet the needs of both DIY mechanics and professional garages looking for specialist driveline expertise. We focus on delivering solutions that make repairs straightforward and provide long-lasting results.

How the Peugeot 208 drivetrain is built

The drivetrain in a Peugeot 208 uses a classic front-wheel-drive (FWD) layout where engine torque is transmitted via the gearbox to the front wheels. The system consists primarily of two drive shafts, one for the left side and one for the right. These shafts are not identical; they often differ in length and design depending on the gearbox position in the engine bay. Each shaft is fitted with two joints: an inner CV joint connecting to the gearbox and an outer CV joint fitting into the wheel hub. The inner joint is engineered to accommodate the axial plunge that occurs as the vehicle suspension moves up and down.

The outer joint is a constant velocity joint that allows the wheel to steer while transmitting power smoothly. To protect these precision components, rubber CV boots packed with specialised grease are used. These boots are critical to the system's service life, keeping road dirt and moisture away from the moving parts. On the Peugeot 208, the system is engineered to be as light and compact as possible to support the vehicle's low fuel consumption, making material quality and accurate fitment especially important when replacing parts.

Common faults and symptoms

Several warning signs indicate a problem with the drivetrain on your Peugeot 208. One of the most typical symptoms is a rhythmic clicking or knocking sound heard when taking tight turns at low speeds. This is almost invariably a sign that an outer CV joint on your Peugeot 208 has developed play due to wear or a split boot. If ignored, the joint can eventually fail completely, causing the car to lose all drive.

Another common symptom is vibration felt through the car chassis or steering wheel, particularly under acceleration. This can point to an out-of-balance drive shaft on your Peugeot 208 or a worn inner joint. It is also important to check for grease splatters inside the wheel rims or on the ground where the car is parked. This is often the sign of a split CV boot. If a boot tears, lubricant escapes and road dirt enters, which destroys the joint in very short order. Acting promptly when these symptoms appear can save you from substantial future repair bills.

Common parts to replace on the Peugeot 208

When it is time to repair the drivetrain on your Peugeot 208, certain components are replaced more frequently. We have organised our selection so you can quickly find what you need based on the model's exact requirements. Here are the most common categories for this vehicle:

  • Drive shaft Peugeot 208: We offer multiple versions of complete drive shafts. Replacing the entire shaft is often the safest and most time-efficient way to resolve issues with both the inner and outer joints at the same time.
  • Outer CV joint Peugeot 208: In this category, you can choose to replace just the outer joint if the rest of the shaft is in good condition, which is a cost-effective solution for clicking noises on full lock.

Alongside these main components, it is also common to need replacement CV boots and fitting kits. Choosing parts from our range gives you components built to handle the demands of everyday motoring, from city traffic to extended motorway journeys.

How to find the right part for your Peugeot 208

Navigate directly to the right category for your Peugeot 208:

On a vehicle with several possible drivetrain issues, it pays to start in the correct section straight away. By exploring the exact product groups for the Peugeot 208, it is easier to distinguish between faults in the drive shaft, CV joint or propeller shaft and proceed to the page that best matches your symptoms and fitment needs.

Finding the exact part for a Peugeot 208 can be tricky because specifications vary depending on the engine option, gearbox type and model year. Differences can include the number of splines (teeth) on the shaft, the overall length of the driveshaft, or whether the car requires specific ABS rings integrated into the joint. To make finding the right part simple, our shop lets you quickly select your car's make, model and engine, instantly filtering out everything that is not technically compatible with your vehicle.

Once you have your results, we recommend reading the product descriptions carefully to confirm you are ordering the correct side (left or right) and that technical specifications match the component you are removing. If you have any doubts, our technical team is on hand to assist you. Selecting by make, model and engine is the most reliable way to avoid ordering errors and ensure your Peugeot 208 returns to the road quickly with a perfect fit.

Why shop at CVJoint24?

CVJoint24 is not just another general car parts retailer; we are the international shop of a Swedish driveline specialist, with our central warehouse in Helsingborg, Sweden, dedicated entirely to drivetrains and power transmission. This focused specialisation means we offer a depth of knowledge and a tailored product range that general suppliers struggle to match. When you purchase Peugeot 208 parts from us, you can trust that every item has been chosen to withstand European roads and winters while meeting the demands of modern cars. We combine technical expertise with a straightforward ordering experience.

We understand how critical prompt delivery and accurate technical data are. By focusing on this niche area of vehicle mechanics, we provide greater accuracy in our part recommendations and maintain high availability of essential components. Choosing by make, model and engine gives you full confidence in a hassle-free fit. Whether you are a professional mechanic or a skilled home enthusiast, CVJoint24 is your dependable partner for everything related to your Peugeot 208 drivetrain, keeping you moving with durable quality.

Frequently Asked Questions about the Peugeot 208 Drivetrain

How do I know whether the left or right drive shaft is faulty on my Peugeot 208?

A common way to identify the side is to listen for noises: if you hear a clicking sound when turning right, it is often the outer left CV joint that is worn, and vice versa. You can also visually inspect the CV boots to check which one is leaking grease.

Do all drive shafts fit every Peugeot 208 model?

No, drive shafts vary depending on whether your car has a petrol or diesel engine, as well as whether it is fitted with a manual or automatic gearbox. Always select your car's make, model and engine variant in our search tool to find the correct part.

Can I replace just the CV joint, or do I need to replace the complete drive shaft?

On the Peugeot 208, you can often replace just the outer CV joint if the shaft is otherwise undamaged. However, if the fault lies in the inner joint or if the shaft is corroded or damaged, we recommend replacing the entire drive shaft for the best result.

What are the most common signs of a worn drivetrain on a Peugeot 208?

The most common symptoms include clicking noises on full steering lock, vibrations during acceleration, and unusual sounds from the front suspension when driving over uneven surfaces.

Are the CV boot and grease included when I buy an outer CV joint from you?

Yes, when you purchase an outer CV joint for a Peugeot 208 from CVJoint24, it is supplied as a complete kit with a CV boot, grease, clips, and necessary mounting hardware.

How often should I inspect the drivetrain on my car?

We recommend inspecting the drive shaft boots at every service or seasonal tyre change. An intact boot is the most cost-effective insurance against expensive damage to the CV joints.