Peugeot 307 Break

Spare parts and drivetrain components for Peugeot 307 Break.

Products for Peugeot 307 Break

39 products
1 - 24 of 39
Item no.:0580317
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 59 mm
  • Outer splines: 25
  • Thread size: M20X1,5
Item no.:2142075
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 939 mm
  • Joint diameter: 86 mm
Item no.:635266
  • Position: Rear
Item no.:7317053
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 625 mm
  • Joint diameter: 86 mm
Item no.:1132304
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 604 mm
  • Joint diameter: 86 mm
Item no.:2139625
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 829 mm
  • Joint diameter: 86 mm
Item no.:1182869
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 631 mm
  • Joint diameter: 79 mm
Item no.:2193707
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 912 mm
  • Joint diameter: 79 mm
Item no.:0558912
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 59 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:354488
  • Position: Outer
  • Inner splines: 39
  • Seal diameter: 58,5 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:0587630
  • Position: Outer
  • Inner splines: 39
  • Seal diameter: 58 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:2134600
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 949 mm
  • Joint diameter: 101 mm
Item no.:1131300
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 617 mm
  • Joint diameter: 101 mm
Item no.:2142701
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 920 mm
  • Diameter 1: 100 mm
Item no.:0640303
  • Total length: 113 mm
Item no.:7301185
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 25
  • Total length: 598 mm
  • Joint diameter: 86 mm
Item no.:393250
  • Position: Front
  • Seal ring diameter: 36,2 mm
Item no.:0979205
  • Inner diameter: 38 mm
  • Outer diameter: 63 mm
Item no.:690484
  • Position: Rear
  • Inner diameter: 30 mm
  • Outer diameter: 50 mm
  • Height: 12 mm
Item no.:394648
  • Position: Front
Item no.:0649430
  • Total length: 94 mm
Item no.:0627092
  • Total length: 116 mm
Showing 1–24 of 39 products

Drivetrain for Peugeot 307 Break

The Peugeot 307 Break is a versatile car that requires a properly functioning drivetrain to maintain its comfort and safety on the road. As a spacious estate, this model is frequently used for carrying heavier loads and family trips, placing extra strain on the power transmission components. The drivetrain is the system that transfers engine power to the wheels, and for a front-wheel-drive car such as the 307 Break, this places significant demand on the front drive shafts and joints. At CVJoint24, you will find a dedicated range tailored specifically for this model. We understand the importance of precision in power delivery, which is why we only supply parts that meet or exceed original equipment specifications. Whether you drive a petrol or diesel version of your Break, correctly dimensioned components are crucial for avoiding unnecessary wear on the gearbox and suspension. Timely drivetrain maintenance significantly extends the service life of your car.

How the drivetrain is designed on the Peugeot 307 Break

The layout of the drivetrain on a Peugeot 307 Break follows the classic configuration for front-wheel-drive vehicles with a transverse engine. Power travels from the engine through the gearbox and out to the road wheels via two drive shafts. The right-hand drive shaft is typically longer and may be split with an intermediate centre bearing to minimise vibrations and torque steer. Each Peugeot 307 Break drive shaft is fitted with two joints: an inner joint at the gearbox and an outer joint at the wheel hub. The outer joint is a constant velocity joint (CV joint) that allows the wheel to steer and articulate with suspension travel while maintaining a constant transfer of power. Flexible CV boots protect these sensitive joints from road dirt and moisture, which is vital for component life on harsh European roads where winter salt and grime are widespread.

Common faults and symptoms

There are several clear signs that the drivetrain on your Peugeot 307 Break is beginning to wear out. One of the most typical symptoms is a rhythmic clicking or knocking sound on full steering lock under acceleration; this usually indicates that an outer Peugeot 307 Break CV joint is failing. If you instead notice vibrations throughout the car during acceleration, particularly at higher speeds, the inner CV joint or an unbalanced or damaged driveshaft may be the culprit. It is equally important to inspect the CV boots regularly. A split boot quickly leads to grease loss and dirt ingress, destroying the joint in a very short time. Ignoring these warning signs can result in complete failure and total loss of drive, creating an expensive repair and a serious hazard on the road.

Common parts to replace on the Peugeot 307 Break

For the Peugeot 307 Break, two main categories of spare parts are predominantly required during drivetrain maintenance. We stock specific items tailored to this model, providing excellent coverage for most owners. Our range includes:

  • Drive shaft for Peugeot 307 Break: We supply several complete drive shaft variants to cover most engine and gearbox configurations.
  • Outer CV joint for Peugeot 307 Break: We provide specific outer CV joints when the shaft itself remains in good condition and only the joint has worn out.

Replacing an entire drive shaft is often the more cost-effective long-term solution compared to renewing a single joint, as you receive brand-new components and fresh CV boots at both ends. This saves considerable installation time and prevents premature issues with the remaining joint on that side. Furthermore, it eliminates the labour-intensive job of pressing apart rusted or seized assemblies.

How to find the right part for your Peugeot 307 Break

Proceed to the relevant section for your Peugeot 307 Break:

On a vehicle with several potential drivetrain issues, starting in the precise category is the quickest route to a repair. Comparing specific part categories for the Peugeot 307 Break makes it simple to distinguish between drive shaft, CV joint or prop shaft faults, directing you to the exact page matching your symptoms and specifications.

Selecting the correct part for a French vehicle such as a Peugeot can occasionally be tricky, as revisions may occur across production months and chassis numbers. To make this process straightforward and reliable, you can easily filter our catalogue by your vehicle's make, model and engine variant to find compatible parts for your specific Peugeot 307 Break. We always advise checking technical specifications—such as spline count, ABS reluctor ring teeth or overall length—whenever multiple configurations are shown. Our expertise in the All car makes section ensures you receive sound guidance. If you are ever unsure, comparing the physical dimensions of your existing component with the measurements in our product specifications ensures a correct fit on the first attempt.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist shipping across the EU from its central warehouse in Helsingborg, Sweden. Our reputation is built on thorough technical knowledge and premium product quality. When you order parts for your Peugeot 307 Break from us, you gain the confidence of dealing with specialists who truly understand automotive power transmission. We focus exclusively on drivetrain components, allowing us to maintain a deeper and more targeted inventory than general car-part suppliers. By selecting your exact car model and engine, you can order with confidence, keeping your garage repair times to a minimum. We are committed to supplying high-grade parts at competitive prices so you can keep driving your Peugeot safely and comfortably for many kilometres ahead. Our customer support team is always on hand to help with any technical queries regarding your order.

Frequently Asked Questions about Peugeot 307 Break - Drivetrain & Spare Parts

How do I know if my Peugeot 307 Break needs a new drive shaft?

The most common symptoms are vibrations through the steering wheel or chassis under acceleration, as well as unusual noises. If the vibrations cease when you release the accelerator, it is a strong indicator that an inner CV joint or drive shaft is worn.

Does the same CV joint fit all Peugeot 307 Break models?

No, it varies depending on engine size, gearbox type (manual/automatic) and sometimes model year. Always filter by your car's make, model and engine variant on our website to find the correct part for your vehicle.

What causes a clicking noise when turning in my 307 Break?

A clicking noise on full steering lock is almost always caused by a worn outer CV joint. This is typically the result of a split CV boot that has allowed grease to leak out and dirt to enter the joint bearing.

Is it difficult to replace a drive shaft on a Peugeot 307 Break?

It requires a reasonable amount of mechanical experience and the right tools, including a large socket for the hub nut. For an experienced DIY mechanic or professional garage, replacement usually takes between one and two hours per side.

Are the CV boot and grease included when I buy an outer CV joint?

Yes, when you purchase an outer CV joint from us at CVJoint24, the CV boot, grease, clamps and mounting hardware are normally included to ensure a complete replacement.

Can I drive with a split CV boot?

It is not recommended. As soon as the boot tears, the joint begins to wear at an accelerated rate. Replacing the boot promptly can save you the expense of an entire replacement CV joint or drive shaft later on.