Peugeot 308

Spare parts and drivetrain components for the Peugeot 308.

Products for Peugeot 308

91 products
1 - 24 of 91
Item no.:2159680
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 935 mm
  • Joint diameter: 86 mm
Item no.:0596793
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 58 mm
  • Outer splines: 28
  • Thread size: M24X1,5
Item no.:634377
  • Position: Rear
Item no.:357209
  • Position: Outer
  • Inner splines: 34
  • Splines wheel side: 28
  • Seal diameter: 58,5 mm
  • Thread size: M22X1,5
Item no.:2120341
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 25
  • Total length: 940 mm
  • Joint diameter: 86 mm
Item no.:144970
  • Position: Inner
  • Inner splines: 34
  • Splines gearbox side: 24
  • Total length: 151 mm
Item no.:248228
  • Position: Inner
  • Inner splines: 34
  • Splines gearbox side: 24
  • Total length: 141 mm
Item no.:241052
  • Position: Inner
  • Inner splines: 34
  • Splines gearbox side: 24
  • Total length: 396 mm
  • ABS teeth: 34
Item no.:1175873
  • Position: Front left
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 679 mm
  • Joint diameter: 86 mm
Item no.:350323
  • Position: Outer
  • Inner splines: 39
  • Seal diameter: 58,5 mm
  • Outer splines: 25
  • Thread size: M24X1,5
Item no.:2185752
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 923 mm
  • Joint diameter: 86 mm
Item no.:1131791
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 641 mm
  • Joint diameter: 86 mm
Item no.:7301382
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 939 mm
  • Joint diameter: 84,4 mm
Item no.:0555004
  • Position: Outer
  • Inner splines: 34
  • Seal diameter: 59 mm
  • Outer splines: 28
  • Thread size: M22X1,5
Item no.:118686
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 650 mm
  • Diameter 1: 95 mm
  • Diameter 2: 89 mm
Item no.:1108799
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 665 mm
  • Joint diameter: 86 mm
Item no.:2186865
  • Position: Front right
  • Splines gearbox side: 37
  • Splines wheel side: 28
  • Total length: 980 mm
Item no.:2156170
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 842 mm
  • Joint diameter: 86 mm
Item no.:1174232
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 621 mm
  • Joint diameter: 79 mm
Item no.:147691
  • Position: Inner
  • Inner splines: 34
  • Splines gearbox side: 37
  • Total length: 154 mm
Item no.:7300410
  • Position: Outer
  • Inner splines: 34
  • Splines wheel side: 25
  • Seal diameter: 55,7 mm
  • ABS teeth: 48
Item no.:246680
  • Position: Inner
  • Inner splines: 34
  • Splines gearbox side: 24
  • Total length: 380 mm
  • ABS teeth: 34
Item no.:111313
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 680 mm
  • Diameter 1: 77 mm
  • Diameter 2: 76 mm
Item no.:2181726
  • Position: Front right
  • Splines gearbox side: 24
  • Splines wheel side: 28
  • Total length: 920 mm
  • Joint diameter: 86 mm
Showing 1–24 of 91 products

Drivetrain for Peugeot 308

The Peugeot 308 is a popular model that requires specific components to maintain its characteristic handling and efficiency. The drivetrain is the core of your car's power transmission, and here at CVJoint24 you will find everything needed to service this critical system. With a broad range in stock, we cover most requirements for this model series, whether for the first generation or subsequent facelifts. We understand the importance of every part—from the smallest circlip to the complete shaft—meeting the highest standards to withstand the demands of daily driving. By selecting the correct drivetrain components, you ensure not only vehicle performance but also long service life and safety. Our focus is on supplying parts that meet or exceed original equipment specifications, making us the natural choice for Peugeot owners across Europe seeking quality and expertise.

How the drivetrain is configured on the Peugeot 308

The drivetrain on a Peugeot 308 is designed to transfer torque efficiently from the gearbox to the front wheels. The system consists primarily of two drive shafts: one on the left and one on the right. Each shaft is fitted with two joints: an inner joint connecting to the gearbox and an outer joint situated at the wheel hub. The outer joint is particularly critical as it allows the wheels to steer while transmitting drive, placing heavy demands on material strength. To protect these precision components, flexible boots packed with specialised grease are used to lubricate and cool the joints. If a CV boot tears, the joint is exposed to dirt, road salt and moisture, which quickly causes wear and failure. Understanding this configuration helps you accurately identify where a fault has developed and determine which component to replace to restore original driving characteristics.

Common faults and symptoms

There are several clear warning signs that the drivetrain in your Peugeot 308 is worn and requires attention. One of the most typical symptoms is a clicking or knocking sound that becomes pronounced on full steering lock under acceleration; this usually indicates that an outer CV joint on your Peugeot 308 is worn and has developed play in its internal bearings. If you instead experience vibrations throughout the car under acceleration, especially at higher speeds, it often points to an unbalanced or damaged inner joint or driveshaft. Another telltale sign is grease splattered inside the wheel rim or wheel arch, pointing to a split boot. Ignoring these warnings can lead to complete failure, resulting in total loss of drive and leaving you stranded. It is therefore vital to address any noise or vibration promptly to prevent costly secondary damage to the gearbox or suspension.

Common parts to replace on the Peugeot 308

Within the drivetrain range for the Peugeot 308, two component groups account for most replacements due to natural wear. We currently stock multiple variants of the drive shaft for the Peugeot 308, catering to the numerous engine and gearbox configurations available. Alongside complete shafts, the outer CV joint is a frequently requested replacement part, with several options available for prompt dispatch. Here are the primary categories to inspect during servicing:

  • Complete drive shaft: The most convenient solution for severe wear or damage to the shaft tube, saving valuable workshop fitting time.
  • Outer CV joint: The component that typically wears out first owing to the high articulation required during steering and acceleration.
  • CV boot: An inexpensive yet vital safeguard that protects costly joints from premature failure by keeping grease in and contaminants out.

By selecting the appropriate component, you can streamline repair times and reduce costs while maintaining total vehicle reliability.

How to find the correct part for your Peugeot 308

Navigate directly to the appropriate section for your Peugeot 308:

When dealing with potential drivetrain issues, it pays to start in the correct section straight away. By identifying the exact component category for your Peugeot 308, it becomes straightforward to distinguish between faults in a drive shaft, constant velocity joint or propeller shaft, taking you directly to the parts that match your symptoms and exact vehicle fitment.

Our catalogue is continually updated to ensure all vehicle technical data is accurate, helping you get the right part on the first attempt and keeping your car off the road for as little time as possible.

Why shop with CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, and we pride ourselves on offering in-depth expertise that general car parts stores rarely match. We focus exclusively on vehicle power transmission, giving us comprehensive technical knowledge of the Peugeot 308 components we stock. Our range is carefully curated to offer the best balance of quality and competitive pricing, built to withstand harsh driving conditions. When ordering from us, you receive high-grade components backed by precise fitment advice when you select your vehicle make, model and engine. We combine specialist know-how with the convenience of reliable e-commerce, making us a trusted partner for both DIY enthusiasts and professional garages across Europe. With fast dispatch from our central warehouse and a dedicated focus on drivetrain technology, we are here to keep you moving.

Frequently Asked Questions about Drivetrain for Peugeot 308 – Premium-Quality Spare Parts

How do I know if my Peugeot 308 needs a new drive shaft?

The most common signs are heavy vibrations under acceleration or a persistent knocking noise. If the vibrations stop when you lift off the accelerator, this is a strong indication that a drive shaft is faulty.

Can I replace just the outer CV joint on my Peugeot 308?

Yes, if the shaft itself is undamaged and the fault lies solely in the joint (often noticeable through clicking noises when cornering), you can save money by replacing only the outer CV joint.

Why is it important to filter by exact vehicle details when searching?

The Peugeot 308 is available with many different engines and gearboxes. By selecting your car's exact make, model and engine, you ensure that the part's length and spline count match your vehicle's specifications precisely.

What causes drivetrain vibrations on a Peugeot 308?

Vibrations are most commonly caused by an unbalanced drive shaft or wear in the inner CV joint. They can also occur if a CV boot has split, allowing dirt to enter and damage the joint's moving components.

Are your car parts equivalent to original Peugeot parts?

Yes, our drive shafts and CV joints are manufactured to meet or exceed original equipment technical standards, ensuring safety and long service life for your Peugeot 308.

How often should I check the CV boots on my Peugeot 308?

We recommend inspecting the CV boots at every oil service or tyre change. Detecting a small split early can save you the cost of replacing the entire CV joint or drive shaft.