Peugeot 806

Spare parts and drivetrain components for the Peugeot 806.

Products for Peugeot 806

27 products
1 - 24 of 27
Item no.:0356889
  • ABS teeth: 48
  • Inner diameter: 90 mm
  • Outer diameter: 99 mm
  • Width: 10 mm
Item no.:337267
  • Position: Front
  • ABS teeth: 48
  • Inner diameter: 90 mm
  • Outer diameter: 99 mm
  • Width: 10 mm
Item no.:1124785
  • Position: Front left
  • Total length: 647 mm
  • Splines gearbox side: 24
  • Splines wheel side: 27
Item no.:1198204
  • Position: Front left
  • Total length: 647 mm
  • Splines gearbox side: 24
  • Splines wheel side: 27
  • ABS teeth: 48
Item no.:2128657
  • Position: Front right
  • Total length: 929 mm
  • Splines gearbox side: 24
  • Splines wheel side: 27
Item no.:2109652
  • Position: Front right
  • Total length: 929 mm
  • Splines gearbox side: 24
  • Splines wheel side: 27
  • ABS teeth: 48
Item no.:0527722
  • Position: Outer
  • Seal diameter: 59 mm
  • Inner splines: 34
  • Outer splines: 27
  • Joint diameter: 89,8 mm
Item no.:2105085
  • Position: Front right
  • Total length: 955 mm
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • ABS teeth: 48
Item no.:1104195
  • Position: Front left
  • Total length: 641 mm
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • ABS teeth: 48
Item no.:0539588
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 59 mm
  • Inner splines: 39
  • Outer splines: 27
Item no.:0613433
  • Position: Front
  • Inner diameter: 24 mm
  • Total length: 103 mm
Item no.:2119123
  • Position: Front right
  • Total length: 940 mm
  • Splines gearbox side: 37
  • Splines wheel side: 27
  • ABS teeth: 48
Item no.:3586424
  • Position: Front, Outer
  • Inner splines: 39
  • Outer diameter: 100 mm
  • Splines wheel side: 27
Item no.:3587233
  • Position: Front, Outer
  • Inner splines: 34
  • Outer diameter: 90 mm
  • Splines wheel side: 27
  • ABS teeth: 48
Item no.:3555709
  • Position: Front, Outer
  • Inner splines: 34
  • Outer diameter: 90 mm
  • Splines wheel side: 27
Item no.:110744
  • Total length: 665 mm
  • Splines gearbox side: 24
  • Splines wheel side: 27
Item no.:217734
  • Total length: 950 mm
  • Splines gearbox side: 24
  • Splines wheel side: 27
Item no.:0325263
  • ABS teeth: 48
  • Inner diameter: 90 mm
  • Outer diameter: 99 mm
  • Width: 10 mm
Item no.:337067
  • Position: Front
  • ABS teeth: 48
  • Inner diameter: 90 mm
  • Outer diameter: 99 mm
  • Width: 10 mm
Item no.:1100926
  • Position: Front left
  • Total length: 640 mm
  • Splines gearbox side: 24
  • Splines wheel side: 27
  • ABS teeth: 48
Item no.:2159751
  • Position: Front right
  • Total length: 930 mm
  • Splines gearbox side: 24
  • Splines wheel side: 27
Item no.:0579085
  • Position: Outer
  • ABS teeth: 48
  • Seal diameter: 59 mm
  • Inner splines: 34
  • Outer splines: 27
Item no.:116331
  • Total length: 641 mm
  • Splines gearbox side: 37
  • Splines wheel side: 27
Item no.:0640315
  • Position: Front
  • Inner diameter: 24 mm
  • Total length: 103 mm
Showing 1–24 of 27 products

Drivetrain for Peugeot 806

The Peugeot 806 is a classic, spacious MPV that has served European households reliably for many years. As a large people carrier, it places specific demands on its power transmission, especially when carrying heavy loads or embarking on long family holidays. The drivetrain is the critical link ensuring engine torque is transferred effectively to the road surface. At CVJoint24, you will find a carefully curated range of 14 specific items for this model. We are a Swedish driveline specialist dedicated to offering components with an exact fit, which is essential for preserving the vehicle's original driving dynamics and safety. By choosing the right parts for your drivetrain, you ensure that your Peugeot 806 remains a dependable partner on the road.

How the Peugeot 806 drivetrain is designed

The drivetrain setup on the Peugeot 806 is engineered to balance ride comfort with load-carrying capacity. The vehicle uses a conventional front-wheel-drive configuration where the transverse engine sends power through the gearbox to the front wheels. This is achieved via two drive shafts that face different technical demands; the longer shaft on the passenger side often requires an intermediate bearing support to eliminate vibrations at higher speeds. Each drive shaft is fitted with an inner and an outer CV joint. The inner joint accommodates the vertical travel of the suspension, while the outer constant velocity joint allows the wheels to articulate during steering. Furthermore, the ABS ring plays an essential role by sitting mounted on the outer joint, where it continuously monitors wheel speed to feed vital data to the braking system.

Common faults and symptoms

Paying attention to early signs of drivetrain wear can save you money and prevent breakdown delays on your journeys. On the Peugeot 806, one of the most telltale symptoms of a worn outer CV joint is a rhythmic clicking sound clearly audible when making sharp turns at low speeds. If you instead notice vibrations shaking the whole vehicle under acceleration, the issue is typically rooted in the inner joints of the drive shaft or an out-of-balance shaft assembly. Another frequent problem is an illuminated ABS warning light on the dashboard. In many instances, this is caused by a cracked ABS ring resulting from corrosion expanding beneath it, disrupting the sensor readings. Ignoring these signs can lead to secondary damage to the gearbox or complete loss of drive should a joint fail entirely.

Frequently replaced parts on the Peugeot 806

To preserve your vehicle's driveability, replacing worn components promptly is vital. The most frequently ordered parts for this model include drive shafts, outer CV joints and ABS rings. Selecting vehicle-specific parts guarantees a durable repair and an exact original-equipment fit. Our components are manufactured to high standards to withstand the heavy loads and stresses a fully laden Peugeot 806 encounters. It is also worth remembering that a split CV boot can rapidly ruin an otherwise sound CV joint, which is why regular inspections of all driveline rubber boots are strongly advised. Our complete kits are assembled to make installation as straightforward as possible.

How to find the right part for your Peugeot 806

Navigate directly to the relevant subcategory for your Peugeot 806:

When working on a vehicle with several possible driveline issues, selecting the correct category from the outset saves valuable time. By comparing the exact sections for the Peugeot 806, it is simpler to pinpoint whether you need a drive shaft, CV joint or propeller shaft component, and proceed to the page that matches your symptoms and fitment criteria.

Always verify technical specifications such as the tooth count on the ABS ring or overall driveshaft length if your car has had past modifications, ensuring a trouble-free installation. With 14 specific items in our catalogue, we cater for most Peugeot 806 variants so you can order with complete confidence. Getting the right part first time saves both workshop hours and expense.

Why shop at CVJoint24?

When you buy from CVJoint24, you partner with a dedicated specialist in driveline and power transmission components. Rather than offering general automotive sundries from tyres to air fresheners, we focus entirely on the parts that deliver power to your wheels. Our Swedish heritage means we understand the harsh challenges European roads present, from road salt to sharp temperature swings that accelerate wear on CV joints and ABS rings. Drawing on our technical expertise and commitment to product quality, we guarantee reliable fitment and lasting durability for every purchase. We unite comprehensive inventory availability with specialist product insight, making us the natural destination for your Peugeot 806 spare parts.

Frequently Asked Questions about Drivetrain Parts for Peugeot 806 - Exact-Fit Replacement Parts

How do I know which drive shaft fits my Peugeot 806?

The easiest way is to select your Peugeot 806 model, year and engine variant on our website. Because the Peugeot 806 uses different drive shafts depending on the engine and gearbox, selecting your exact vehicle specification ensures you find the 14 parts precisely tailored to your car.

What are the most common signs of a failing CV joint on a Peugeot 806?

A classic symptom is a distinct clicking or knocking noise when cornering. If the noise disappears while driving straight ahead but returns under steering lock, it is usually the outer CV joint that needs replacing.

Why is the ABS ring a common failure point on this model?

On the Peugeot 806, the ABS ring is directly exposed to moisture and road dirt. Rust developing beneath the ring causes it to expand and eventually crack, which interrupts the signal to the sensor and illuminates the ABS warning light.

Can I replace just the CV boot if the joint is still in working order?

Yes, if you catch a split or torn CV boot early before dirt and water have damaged the joint itself, you can replace just the boot. However, if the joint has already started making noise, the complete CV joint must be replaced.

Do your CV joint kits include everything required for installation?

Yes, our outer CV joint kits for the Peugeot 806 come complete with the joint itself, a vehicle-specific CV boot, high-performance grease, and all necessary securing clamps.

Is it difficult to replace a drive shaft on a Peugeot 806 yourself?

It requires moderate mechanical experience and suitable tools, including a heavy-duty socket for the hub nut. For a confident DIY mechanic, it is a straightforward job, but we always recommend consulting your vehicle's workshop manual.