Propeller shafts for Audi A4 Avant S4 Quattro

We stock propeller shafts specifically developed for the Audi A4 Avant S4 Quattro. This page displays parts for this high-performance four-wheel-drive model, removing the hassle of...

Products for Propeller shafts for Audi A4 Avant S4 Quattro

8 products
1 - 8 of 8
Item no.:0232283
  • Total length: 1,565 mm
  • Number of joints: 3
  • Outer diameter 1: 99,7 mm
  • Bolt circle diameter 1: 86 mm
  • Outer diameter 2: 99,7 mm
Item no.:0244629
  • Total length: 1,529 mm
  • Number of joints: 2
  • Outer diameter 1: 91,5 mm
  • Outer diameter 2: 99,73 mm
  • Bolt circle diameter 2: 86 mm
Item no.:626075
  • Position: Rear
  • Total length: 1,610 mm
Item no.:621054
  • Position: Rear
  • Total length: 1,505 mm
  • Outer diameter 1: 99,7 mm
  • Bolt circle diameter 1: 86 mm
Item no.:629079
  • Position: Rear
  • Total length: 1,493 mm
  • Number of joints: 2
  • Outer diameter 1: 99,7 mm
  • Bolt circle diameter 1: 86 mm
Item no.:622912
  • Position: Rear
  • Total length: 1,478 mm
Item no.:622102
  • Total length: 1,478 mm
  • Outer diameter 1: 100 mm
  • Bolt circle diameter 1: 86 mm
Item no.:626862
  • Position: Rear
  • Total length: 1,478 mm
  • Outer diameter 1: 99,7 mm
  • Bolt circle diameter 1: 86 mm

Frequently asked questions about propeller shafts for Audi A4 Avant S4 Quattro

How do I know if the propeller shaft on my Audi S4 Quattro is damaged?

The most common symptoms are vibrations through the cabin or bodyshell under acceleration, clunking noises when changing gear or pulling away, and whining sounds from the centre of the car which suggest a worn centre bearing.

Can I replace just the centre bearing on the propeller shaft?

On some models this is possible, but for the Audi S4 it is often recommended to replace the entire propeller shaft. This is because the shaft is dynamically balanced as a complete assembly, and replacing parts individually can cause ongoing vibrations.

Does a propeller shaft from a standard Audi A4 fit an S4?

No, usually not. The S4 model typically features different dimensions and flanges, and it is engineered to handle substantially higher torque than standard models. Always select your car's exact make, model and engine variant to find the correct part.

Why does my Audi S4 vibrate at higher speeds?

This is often caused by an imbalance in the propeller shaft, which can stem from worn joints, a failing centre bearing, mechanical damage to the shaft, or a lost balancing weight.

How do I find the right propeller shaft for my specific model year?

The easiest and most reliable way is to select your vehicle make, model and engine variant in our search filter. This will display only the prop shafts engineered to fit your Audi A4 Avant S4 Quattro.

Is it difficult to replace a propeller shaft yourself?

It requires access to a vehicle lift and the proper tools. Because the shaft is heavy and located centrally beneath the vehicle, the job demands care and precision, but it is well within reach for an experienced DIY mechanic.