Propeller shafts for Mercedes Vito Mixto

Find the right propeller shaft for your Mercedes Vito Mixto by selecting your vehicle model and engine to ensure a precise match with your drivetrain. Our range includes intermediate...

Products for Propeller shafts for Mercedes Vito Mixto

39 products
1 - 24 of 39
Item no.:0209796
  • Total length: 2,240 mm
  • Number of joints: 4
  • Outer diameter 1: 57 mm
  • Bolt circle diameter 1: 101,6 mm
  • Outer diameter 2: 57 mm
Item no.:0248571
  • Total length: 2,458 mm
  • Number of joints: 4
  • Outer diameter 1: 57 mm
  • Bolt circle diameter 1: 101,6 mm
  • Outer diameter 2: 57 mm
Item no.:0277360
  • Total length: 2,428 mm
  • Number of joints: 4
  • Outer diameter 1: 57 mm
  • Bolt circle diameter 1: 101,6 mm
  • Outer diameter 2: 57 mm
Item no.:0274260
  • Total length: 2,361 mm
  • Number of joints: 4
  • Outer diameter 1: 57 mm
  • Bolt circle diameter 1: 101,5 mm
  • Outer diameter 2: 57 mm
Item no.:0248065
  • Total length: 2,406 mm
  • Number of joints: 4
  • Outer diameter 1: 57 mm
  • Bolt circle diameter 1: 101,6 mm
  • Outer diameter 2: 57 mm
Item no.:0283668
  • Total length: 1,951 mm
  • Number of joints: 4
  • Outer diameter 1: 57 mm
  • Bolt circle diameter 1: 101,6 mm
  • Outer diameter 2: 57 mm
Item no.:0243477
  • Total length: 2,152 mm
  • Number of joints: 4
  • Outer diameter 1: 57 mm
  • Bolt circle diameter 1: 101,6 mm
  • Outer diameter 2: 57 mm
Item no.:3270230
  • Position: Front
  • Total length: 470 mm
  • Number of joints: 2
Item no.:0224334
  • Total length: 2,180 mm
  • Number of joints: 2
  • Outer diameter 1: 57 mm
  • Bolt circle diameter 1: 102 mm
  • Outer diameter 2: 57 mm
Item no.:6261869
  • Position: Rear
  • Total length: 391 mm
  • Number of joints: 2
Item no.:0248165
  • Total length: 1,903 mm
  • Number of joints: 4
  • Outer diameter 1: 57 mm
  • Bolt circle diameter 1: 101,6 mm
  • Outer diameter 2: 57 mm
Item no.:0269054
  • Total length: 2,132 mm
  • Number of joints: 4
  • Outer diameter 1: 57 mm
  • Bolt circle diameter 1: 101,6 mm
  • Outer diameter 2: 57 mm
Item no.:0260668
  • Total length: 2,206 mm
  • Number of joints: 4
  • Number of centre bearings: 2
Item no.:6233501
  • Position: Rear
  • Total length: 2,130 mm
  • Number of joints: 3
  • Number of centre bearings: 2
Item no.:0240072
  • Total length: 2,240 mm
  • Number of joints: 4
  • Number of centre bearings: 2
Item no.:0200252
  • Total length: 2,386 mm
  • Number of joints: 4
  • Number of centre bearings: 2
Item no.:0262352
  • Total length: 2,436 mm
  • Number of joints: 4
  • Number of centre bearings: 2
Item no.:0259134
  • Total length: 1,903 mm
  • Number of joints: 3
  • Number of centre bearings: 2
Item no.:0236105
  • Total length: 2,143 mm
  • Number of joints: 4
  • Number of centre bearings: 2
Item no.:0226969
  • Total length: 2,211 mm
  • Number of joints: 4
  • Outer diameter 1: 57 mm
  • Bolt circle diameter 1: 101,6 mm
  • Outer diameter 2: 57 mm
Item no.:7308337
  • Total length: 2,173 mm
  • Number of joints: 4
  • Outer diameter 1: 57 mm
  • Bolt circle diameter 1: 101,6 mm
  • Outer diameter 2: 57 mm
Item no.:624035
  • Total length: 2,375 mm
  • Outer diameter 1: 57 mm
  • Bolt circle diameter 1: 101,6 mm
  • Outer diameter 2: 57 mm
  • Bolt circle diameter 2: 101,6 mm
Item no.:7308336
  • Position: Rear
  • Total length: 2,143 mm
  • Number of joints: 4
  • Outer diameter 1: 57 mm
  • Bolt circle diameter 1: 101,6 mm
Item no.:6202532
  • Position: Rear
  • Total length: 2,073 mm
  • Number of joints: 4
  • Outer diameter 1: 16 mm
  • Bolt circle diameter 1: 120 mm
Showing 1–24 of 39 products

Propeller shafts for Mercedes Vito Mixto

Finding the right propeller shaft for a Mercedes Benz Vito Mixto is crucial for your vehicle's performance and service life. This model, which often combines passenger-car comfort with the load capacity of a commercial van, places considerable strain on its drivetrain. At CVJoint24, you will find a curated selection of propeller shafts engineered specifically to fit the various configurations of the Vito Mixto. Whether your van is rear-wheel drive or equipped with four-wheel drive, a precisely balanced shaft is essential to prevent vibrations and premature wear on the gearbox and differential.

A propeller shaft is not just a metal tube; it is a precision component engineered to handle high torque through varying angles. For the Mercedes Benz Vito Mixto, this usually means an assembly split into multiple sections with integrated centre bearings and universal joints. Our range covers everything from complete prop shafts to specific replacement components, making it simple for owners and garage mechanics alike to restore dependable performance with premium-grade parts.

What does the propeller shaft do on a Mercedes Benz Vito Mixto?

The primary role of the propeller shaft on a Mercedes Benz Vito Mixto is to transmit engine power from the gearbox to the rear axle, or in four-wheel-drive versions, also to the front axle. Because the engine and gearbox are fixed rigidly to the chassis whilst the rear axle moves up and down with the suspension, the prop shaft must constantly alter both its angle and operating length while driving. This is achieved via universal joints and splines that allow the shaft to articulate smoothly without interrupting power delivery or inducing imbalance.

On a Vito Mixto, the propeller shaft is often long, requiring it to be divided into two or three sections. These sections are supported by centre bearings mounted to the underside of the vehicle. The job of the centre bearing is to minimise vibrations and keep the shaft centred even at high rotational speeds. If the propeller shaft is not functioning correctly, it compromises the overall driving dynamics and can lead to consequential damage to other expensive drivetrain components. That is why choosing a shaft calibrated precisely to your vehicle's specifications is so vital.

Common signs of wear

There are several distinct symptoms indicating that the propeller shaft on your Mercedes Benz Vito Mixto is worn or damaged. The most common sign is vibration felt through the floor and cabin, typically at specific road speeds or under acceleration. These vibrations are usually caused by shaft imbalance, worn U-joints or a failing centre bearing. If you notice a distinct clunking noise when engaging gear or lifting off the accelerator, it often points to excessive play in the universal joints.

Another telltale symptom is a squeaking or whistling noise that changes with road speed, which often indicates that the needle bearings inside a universal joint have dried out or that the centre bearing support is failing. For a Mercedes Benz Vito Mixto covering high mileage, it is vital not to overlook these warnings. In worst-case scenarios, a severely degraded prop shaft can detach or cause a total driveline failure, creating a serious hazard and resulting in far costlier repairs than a scheduled shaft replacement.

How to choose the correct propeller shaft

Selecting the right propeller shaft for a Mercedes Benz Vito Mixto can seem daunting given the variety of wheelbases, transmissions and drive configurations. There are 47 different matches in our system, which highlights the need for exact fitment. The most reliable way to find the correct component is to select your van's make, model and engine variant in our store. By filtering via your vehicle's exact specification, we present the propeller shafts technically verified for your Vito Mixto.

When choosing your replacement shaft, check the overall length and the number of sections required. Some configurations use a two-piece shaft, while others require a three-piece unit. It is also wise to verify that the shaft is supplied complete with centre bearings and universal joints, as is standard with most of our quality replacement assemblies. Fitting a complete unit saves valuable installation time and guarantees the entire assembly has been balanced dynamically as a whole at the factory, eliminating the risk of vibration issues.

Related components to check

We recommend inspecting these matching parts for your vehicle when working on the propeller shaft:

When a driveline component shows signs of wear, neighbouring parts on the vehicle often warrant inspection as well. Comparing these exact category pages for the Mercedes Benz Vito Mixto makes it easier to determine whether an issue lies with the propeller shaft itself or another related part of the drivetrain.

This is especially true on commercial vans where vibrations, play and mechanical noise can travel between different sections of the driveline. A quick check of related categories ensures you do not replace one part while overlooking an adjacent worn component that shares the same symptoms.

By assessing the entire power delivery system, you ensure that your new propeller shaft operates under optimal conditions for thousands of trouble-free kilometres. A thorough approach to maintenance saves both time and money over the lifetime of your van.

Why shop at CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, meaning we offer deep technical expertise that generic car parts suppliers cannot match. We specialise purely in all car makes across the drivetrain sector and understand the mechanical demands of the Mercedes Benz Vito Mixto. Our comprehensive category depth allows us to offer multiple propeller shaft solutions, ensuring you find the right fit regardless of model year or engine output.

We pair our technical knowledge with an intuitive online catalogue where selecting your vehicle make, model and engine eliminates guesswork. When buying from CVJoint24, you can rely on precise fitment and components engineered to withstand demanding European road and weather conditions. Because our focus is dedicated to the driveline, you benefit from expert customer support and dedicated parts that keep your Vito Mixto working reliably.

Frequently asked questions about propeller shafts for Mercedes Benz Vito Mixto

How do I know if the propeller shaft on my Mercedes Benz Vito Mixto is failing?

The most common signs are vibrations through the floor or seats while driving, clunking noises when changing gear or accelerating, and squeaking sounds from underneath the vehicle that vary with speed.

Can I replace just the centre bearing on my propeller shaft?

Yes, on many Vito Mixto models it is possible to replace only the centre bearing. However, this often requires specialist tools and the prop shaft should be rebalanced afterwards to prevent future vibrations.

Why are there so many different propeller shafts for the Vito Mixto?

This is because the Mercedes Benz Vito Mixto is built with different wheelbases (vehicle lengths), different gearboxes (manual or automatic) and different drive setups (rear-wheel drive or four-wheel drive).

Are the propeller shafts from CVJoint24 balanced?

Yes, all our complete propeller shafts are delivered factory-balanced to ensure vibration-free driving and maximum service life for your vehicle's drivetrain.

How do I find the exact propeller shaft for my vehicle?

The easiest and most reliable way is to select your vehicle's make, model and engine in our search filter. This narrows down our range of 47 items to the exact ones that fit your Mercedes Benz Vito Mixto.

What happens if I drive with a damaged propeller shaft?

Driving with a defective prop shaft can cause serious consequential damage to the gearbox and rear differential. In the worst case, the shaft can detach whilst driving, posing a severe road safety hazard.

Are universal joints and centre bearings included when I buy a complete propeller shaft?

Yes, when you buy a complete propeller shaft from us, it normally comes fully pre-assembled with both universal joints and centre bearings for a quick and straightforward replacement.