Propeller shafts for Volkswagen LT 28.35 2.0

Looking for a high-quality propeller shaft for your Volkswagen LT 28 35 2.0? As Swedish driveline specialists, we supply a carefully chosen range of propeller shafts tailored...

Products for Propeller shafts for Volkswagen LT 28.35 2.0

12 products
1 - 12 of 12
Item no.:0245616
  • Number of centre bearings: 1
  • Number of joints: 1
  • Total length: 747 mm
Item no.:0283865
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 1,598 mm
Item no.:0292164
  • Number of centre bearings: 1
  • Number of joints: 2
  • Total length: 921 mm
Item no.:0236897
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 2,401 mm
Item no.:0268794
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 2,767 mm
Item no.:0212206
  • Number of centre bearings: 1
  • Number of joints: 1
  • Total length: 842 mm
Item no.:0224359
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 2,313 mm
Item no.:0289622
  • Number of joints: 2
  • Total length: 830 mm
Item no.:0283237
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 2,428 mm
Item no.:0242637
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 2,554 mm
Item no.:0230693
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 2,582 mm
Item no.:0227136
  • Number of centre bearings: 1
  • Number of joints: 3
  • Total length: 2,816 mm

Propeller shafts for Volkswagen LT 28.35 2.0

Maintaining a classic commercial vehicle like the Volkswagen LT 28 35 2.0 requires premium components, especially when it comes to power transmission. The propeller shaft is a central part of the rear-wheel drive setup on these vehicles, responsible for transferring engine power from the gearbox to the rear axle. On a van frequently used for heavy loads or as a workhorse, the propeller shaft is subjected to considerable stress over time. We offer specifically selected prop shafts engineered to meet the technical demands of the 2.0-litre variant of the LT series. Choosing a model-specific component ensures exact balance and fitment, which is vital for your vehicle's road handling and service life.

Our range covers the various configurations available for this model. As the Volkswagen LT 28 35 2.0 was built during an era when mechanical simplicity was paired with robust engineering, it is essential that replacement parts meet original standards. A new propeller shaft from us restores smooth power delivery and eliminates common problems caused by worn universal joints or unbalanced tubes.

What does a propeller shaft do on a Volkswagen LT 28 35 2.0?

The propeller shaft, also known as a prop shaft, serves as the mechanical link between the gearbox and the rear axle differential. For a rear-wheel-drive vehicle like the Volkswagen LT 28 35 2.0, this is the longest rotating component in the entire drivetrain. Its primary function is to transmit torque while accommodating the angular changes and length variations that occur as the rear axle moves up and down relative to the chassis during driving. This is made possible via universal joints (U-joints) and splined sliding joints.

Without a functioning propeller shaft, the vehicle cannot drive forward. On the LT model, the shaft is often divided into several sections depending on wheelbase length. Every section must be perfectly balanced to prevent vibrations from travelling through the entire body. A correctly operating shaft also reduces wear on the gearbox output bearings and rear axle pinion bearings, saving you money in the long run by preventing secondary drivetrain damage.

Common signs of wear

Wear on a propeller shaft in a Volkswagen LT 28 35 2.0 often develops gradually. One of the clearest indicators is vibration felt through the seat or floor, particularly at specific speeds or under heavy load. These vibrations are usually caused by an out-of-balance shaft or universal joints that have begun to bind. If you hear a clunking noise when engaging gear or releasing the clutch, it may point to play in the shaft joints or splines.

Another common symptom is a squeaking or whining noise that varies with vehicle speed, often indicating that the universal joint needle bearings have dried out or suffered damage from dirt and moisture. For a commercial vehicle like the LT 28 35, staying alert to these warnings is especially important, as a broken propeller shaft during driving can cause extensive damage to both the vehicle and its surroundings. Regular inspection of the shaft condition is therefore essential for all owners of these classic Volkswagen models.

How to choose the correct propeller shaft

Identifying the correct propeller shaft for your Volkswagen LT 28 35 2.0 requires attention to several factors. First and foremost, the vehicle's wheelbase is decisive, as the shaft length varies across different body types such as vans, buses or pickups. You should also check the flange design and the number of bolt holes to guarantee proper fitment to the gearbox and differential. We strongly recommend selecting your vehicle by make, model and engine to filter out parts guaranteed to fit your specific van.

Here is a quick checklist to help guide your choice:

  • Check the total length of your existing shaft in its extended position.
  • Verify the diameter of the mounting flanges.
  • Check whether your model requires a single-piece or multi-piece shaft with a centre bearing.
  • Always confirm the engine type and model year when selecting your vehicle.
By being thorough beforehand, you avoid unnecessary returns and complete your repair much faster. Our customer support team is also available to help if you are unsure which variant suits your LT model.

Related components to check

Feel free to inspect these exact pages for the same vehicle when working on the propeller shaft:

When a driveline component shows signs of wear, neighbouring parts on the same vehicle often require inspection as well. Comparing these exact pages for the Volkswagen LT 28 35 2.0 makes it easier to tell whether the issue lies in the propeller shaft itself or in an adjacent section of the drivetrain.

This is particularly relevant on models where vibrations, play and strange noises can transfer symptoms across several driveline components. A quick look at related categories reduces the risk of replacing the right type of part while missing a connected component causing the same issue.

When replacing the propeller shaft on your Volkswagen LT 28 35 2.0, it is an ideal opportunity to check the rest of the power transmission. A crucial component is the Propeller shaft centre bearings for Volkswagen LT 28.35 2.0. This bearing keeps the shaft centred and absorbs vibrations. If the centre bearing rubber has cracked or the bearing itself has become noisy, even a brand new propeller shaft will suffer unnecessary strain and wear out prematurely. Replacing the centre bearing while the shaft is removed is a cost-effective preventative measure.

Other components to inspect include the gearbox mounts and rear axle suspension bushings. If the engine or gearbox moves excessively due to deteriorated mounts, improper angles are forced upon the prop shaft, accelerating wear on the universal joints. Also check for oil leaks from the rear gearbox output seal or front differential pinion seal, as oil can degrade the centre bearing rubber and attract grit that damages the joints.

Why shop at cvjoint24.com

CVJoint24 is your Swedish driveline specialist for the whole drivetrain. We understand the importance of getting the right part for your vehicle straight away, especially for classic models like the Volkswagen LT 28 35 2.0 where replacement parts can be hard to source elsewhere. Backed by extensive expertise and a strict focus on quality, we ensure every propeller shaft we supply meets high standards for durability and function. We offer an accurate fitment guarantee to give you total peace of mind.

Choosing us gives you access to a comprehensive catalogue, fast delivery across the EU and dedicated customer service from specialists who genuinely understand driveline mechanics. We aim to keep the most relevant components in stock to keep your vehicle's downtime to a minimum. Whether you are restoring a classic workhorse or carrying out routine repairs, we are your trusted partner for driveline parts. Choose the right component first time and experience the difference of parts from a genuine specialist.

Frequently Asked Questions about Propeller Shafts for Volkswagen LT 28.35 2.0

How do I know if the propeller shaft fits my Volkswagen LT 28.35 2.0?

The most reliable way is to select your vehicle by make, model and engine in our selector. As the LT model is available with different wheelbases and configurations, this ensures you receive a shaft with the correct length and flange dimensions.

What are the most common symptoms of a worn propeller shaft?

The most common signs are vibrations through the vehicle floor or seats while driving, clunking noises when changing gear or accelerating, and squeaking sounds that change with the speed of the vehicle.

Do I need to replace the centre bearing at the same time as the propeller shaft?

It is strongly recommended. A worn centre bearing can cause vibrations that damage the new propeller shaft. Replacing both at the same time also saves on future labour costs.

Are your propeller shafts for VW LT balanced on delivery?

Yes, all our propeller shafts are delivered fully balanced from the factory to ensure smooth, vibration-free operation straight after installation.

Can I replace just the universal joints instead of the complete shaft?

On some models this is possible, but it is often safer and more cost-effective to replace the complete shaft, especially if there is wear in the splines or damage to the shaft tube.

How fast is delivery for a propeller shaft for Volkswagen LT?

We dispatch in-stock items swiftly from our warehouse. As a Swedish driveline specialist, we have efficient logistics processes to ensure your order arrives as quickly as possible across the EU.