Rover 200

Spare parts and drivetrain components for the Rover 200.

Products for Rover 200

60 products
25 - 48 of 60
Item no.:3581983
  • Position: Outer
  • Inner splines: 32
  • Seal diameter: 49 mm
  • Outer splines: 26
  • ABS teeth: 43
Item no.:0562469
  • Position: Outer
  • Inner splines: 22
  • Splines wheel side: 23
  • Seal diameter: 49 mm
  • Outer splines: 23
Item no.:1180844
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 26
  • Total length: 641 mm
  • ABS teeth: 27
Item no.:2160617
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 26
  • Total length: 880 mm
  • ABS teeth: 27
Item no.:2177306
  • Position: Front right
  • Splines gearbox side: 29
  • Splines wheel side: 26
  • Total length: 938 mm
  • ABS teeth: 43
Item no.:1110003
  • Position: Front left
  • Splines gearbox side: 29
  • Splines wheel side: 26
  • Total length: 587 mm
  • ABS teeth: 43
Item no.:1193492
  • Position: Front left
  • Splines gearbox side: 29
  • Splines wheel side: 26
  • Total length: 587 mm
  • Joint diameter: 91,9 mm
Item no.:2121653
  • Position: Front right
  • Splines gearbox side: 29
  • Splines wheel side: 26
  • Total length: 936 mm
  • Joint diameter: 91,9 mm
Item no.:1196732
  • Position: Front left
  • Splines gearbox side: 29
  • Splines wheel side: 26
  • Total length: 587 mm
  • ABS teeth: 27
Item no.:2183792
  • Position: Front right
  • Splines gearbox side: 29
  • Splines wheel side: 26
  • Total length: 936 mm
  • ABS teeth: 27
Item no.:1164412
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 26
  • Total length: 642 mm
  • Joint diameter: 84 mm
Item no.:2153318
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 26
  • Total length: 880 mm
  • Joint diameter: 84 mm
Item no.:1131172
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 26
  • Total length: 642 mm
  • ABS teeth: 43
Item no.:2196960
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 26
  • Total length: 880 mm
  • ABS teeth: 43
Item no.:1180764
  • Position: Front left
  • Splines gearbox side: 29
  • Splines wheel side: 26
  • Total length: 595 mm
  • ABS teeth: 27
Item no.:2155735
  • Position: Front right
  • Splines gearbox side: 29
  • Splines wheel side: 26
  • Total length: 928 mm
  • Joint diameter: 92 mm
Item no.:2155745
  • Position: Front right
  • Splines gearbox side: 29
  • Splines wheel side: 26
  • Total length: 928 mm
  • ABS teeth: 27
Item no.:116677
  • Position: Front left
  • Splines gearbox side: 29
  • Splines wheel side: 26
  • Total length: 595 mm
  • Diameter 1: 92 mm
Item no.:1168349
  • Position: Front left
  • Splines gearbox side: 29
  • Splines wheel side: 26
  • Total length: 595 mm
  • ABS teeth: 43
Item no.:2153353
  • Position: Front right
  • Splines gearbox side: 29
  • Splines wheel side: 26
  • Total length: 928 mm
  • ABS teeth: 43
Item no.:1151197
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 26
  • Total length: 642 mm
  • Joint diameter: 84 mm
Item no.:2103395
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 26
  • Total length: 880 mm
  • Joint diameter: 84 mm
Item no.:1172016
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 26
  • Total length: 642 mm
  • ABS teeth: 50
Item no.:2170096
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 26
  • Total length: 880 mm
  • ABS teeth: 50
Showing 25–48 of 60 products

Rover 200 drivetrain

Maintaining the drivetrain on your Rover 200 is essential for preserving the car's reliability and driving pleasure. The drivetrain is the system that transfers the engine's power to the wheels, and in a compact car such as the Rover 200, these components are subjected to considerable stress under every acceleration and turn. At CVJoint24, we specialise in these exact components and offer a range of 25 high-quality products specifically tailored to this model series. By choosing the correct spare parts, you not only ensure that the vehicle runs smoothly, but you also prevent consequential damage to the gearbox and suspension. Our focus is on supplying parts that meet or exceed original equipment specifications, giving you peace of mind over every kilometre you drive in your Rover 200.

How the Rover 200 drivetrain is designed

The Rover 200 uses a classic front-wheel-drive configuration with a transverse engine. Power travels from the gearbox via two drive shafts to the front wheels. Each drive shaft is fitted with two joints: an inner CV joint that allows the shaft to move up and down with the suspension, and an outer CV joint that allows the wheels to steer whilst delivering power forward. This design demands high manufacturing precision to minimise friction and heat build-up. Furthermore, many Rover 200 models are equipped with an ABS system where a toothed ring is mounted on the outer constant velocity joint. This ring is read by a wheel-speed sensor to prevent wheel lock-up under heavy braking. Understanding this layout is essential when diagnosing faults, as each component has a distinct role in the car's dynamics.

Common faults and symptoms

There are several clear signs that the drivetrain on your Rover 200 is wearing out. One of the most common symptoms is a clicking or knocking noise heard on full steering lock under acceleration; this usually indicates a defective outer CV joint. If you experience vibrations through the steering wheel or body shell during acceleration instead, this can point to an out-of-balance driveshaft or wear inside an inner joint. Another frequent issue on the Rover 200 is the ABS warning light illuminating on the instrument cluster. This is often caused by a cracked or corroded ABS ring, which disrupts the signal to the sensor. By addressing these symptoms early, you can avoid more costly repairs and ensure your Rover 200 remains safe on the road.

Common replacement parts for the Rover 200

In our range for the Rover 200, we have identified the key components most frequently in need of replacement over the vehicle's lifespan. We currently stock various drive shafts, outer CV joints and specific ABS rings to cater for the diverse engine variants and model years. It is often more economical and time-efficient to replace a complete drive shaft if several joints show signs of wear. To help you find the right item quickly, we have organised our selection into clear categories:

  • Drive shaft Rover 200 – Complete shafts for a fast and straightforward replacement.
  • Outer CV joint Rover 200 – High-quality joints to eliminate clicking noises when cornering.
  • ABS ring Rover 200 – Precision components to restore proper ABS function.

By choosing these model-specific parts, you ensure an accurate fit that makes installation straightforward and the repair durable.

How to find the right part for your Rover 200

Go directly to the right category for your Rover 200:

On a model with multiple potential drivetrain issues, it is sensible to start directly in the correct section. By comparing the exact component areas for the Rover 200, it is easier to distinguish between problems in the drive shaft, CV joint or propeller shaft and proceed to the page that best matches your symptoms and fitment.

Finding the exact replacement part for a Rover 200 can sometimes be challenging, as specifications can vary depending on engine size and production year. The most reliable way to ensure correct fitment is to select your car's make, model and engine from our vehicle selector. We will then filter the products relevant to your specific car. Nevertheless, it is always advisable to verify technical details, such as the tooth count on an ABS ring for the Rover 200 or the spline count on an outer CV joint, before placing your order. This is because manufacturers occasionally introduced revisions during a single production year. Combining our catalogue data with a quick visual check and spline count of your original component guarantees that your new part will fit perfectly upon installation.

Why buy from CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, and we are passionate about supplying the right car parts at fair prices. For Rover 200 owners, this means gaining access to technical expertise that general car-parts retailers often lack. We understand the engineering nuances of the driveline and have developed an extensive range to cover your maintenance needs. We focus exclusively on the drivetrain and power transmission, allowing us to maintain higher component quality and provide better customer support. When you choose us, you receive high-specification replacement parts designed to withstand demanding European road conditions, backed by our central warehouse in Helsingborg, Sweden.

Frequently Asked Questions about Drivetrain Parts for Rover 200 – Precision-Fit Spare Parts

How do I know whether the drive shaft or the CV joint is failing on my Rover 200?

A clicking noise when cornering usually indicates a worn outer CV joint. If the car vibrates under acceleration, it is more likely an inner joint or an unbalanced drive shaft.

Do all ABS rings fit every Rover 200 model?

No, the tooth count and diameter can vary. It is essential to check the specifications or select your specific make, model and engine to find the correct ABS ring.

Is it difficult to replace an outer CV joint on a Rover 200 yourself?

It requires specific tools and some mechanical experience, but it is a standard job. We also recommend inspecting the CV boot thoroughly during the replacement.

Why is the ABS warning light on in my Rover 200 even though the brakes work fine?

This is often caused by a cracked or corroded ABS ring on the drive shaft, which prevents the wheel speed sensor from taking an accurate reading.

Do your CV joint kits include everything needed for installation?

Yes, our outer CV joint kits for Rover 200 are normally supplied complete with the joint, CV boot, grease and all necessary mounting hardware.

How many drive shafts do you offer for the Rover 200 range?

We currently stock 16 different drive shafts tailored to various Rover 200 versions to ensure comprehensive model coverage.