Rover 400

Spare parts and drivetrain components for the Rover 400.

Products for Rover 400

39 products
1 - 24 of 39
Item no.:131524
  • Position: Front
  • ABS teeth: 43
  • Inner diameter: 82 mm
  • Outer diameter: 93 mm
  • Width: 9 mm
Item no.:0531556
  • Position: Outer
  • Seal diameter: 55 mm
  • Inner splines: 22
  • Outer splines: 26
  • Joint diameter: 83,5 mm
Item no.:0528395
  • Position: Outer
  • ABS teeth: 43
  • Seal diameter: 55 mm
  • Inner splines: 22
  • Outer splines: 26
Item no.:0320714
  • ABS teeth: 43
  • Inner diameter: 82 mm
  • Outer diameter: 93 mm
  • Width: 9 mm
Item no.:1196730
  • Position: Front left
  • Total length: 617 mm
  • Splines gearbox side: 22
  • Splines wheel side: 26
Item no.:1114953
  • Position: Front left
  • Total length: 617 mm
  • Splines gearbox side: 22
  • Splines wheel side: 26
  • ABS teeth: 43
Item no.:2184190
  • Position: Front right
  • Total length: 908 mm
  • Splines gearbox side: 22
  • Splines wheel side: 26
Item no.:2138650
  • Position: Front right
  • Total length: 908 mm
  • Splines gearbox side: 22
  • Splines wheel side: 26
  • ABS teeth: 43
Item no.:1125628
  • Position: Front left
  • Total length: 910 mm
  • Splines gearbox side: 25
  • Splines wheel side: 26
  • ABS teeth: 50
Item no.:2114166
  • Position: Front right
  • Total length: 624 mm
  • Splines gearbox side: 25
  • Splines wheel side: 26
Item no.:0500414
  • Position: Outer
  • Seal diameter: 55 mm
  • Inner splines: 32
  • Outer splines: 26
  • Joint diameter: 91,8 mm
Item no.:0550450
  • Position: Outer
  • ABS teeth: 43
  • Seal diameter: 55 mm
  • Inner splines: 32
  • Outer splines: 26
Item no.:1108634
  • Position: Front left
  • Total length: 565 mm
  • Splines gearbox side: 29
  • Splines wheel side: 26
Item no.:1171618
  • Position: Front left
  • Total length: 565 mm
  • Splines gearbox side: 29
  • Splines wheel side: 26
  • ABS teeth: 43
Item no.:2112897
  • Position: Front right
  • Total length: 965 mm
  • Splines gearbox side: 29
  • Splines wheel side: 26
Item no.:2168124
  • Position: Front right
  • Total length: 965 mm
  • Splines gearbox side: 29
  • Splines wheel side: 26
  • ABS teeth: 43
Item no.:0682238
  • Position: Front
  • Diameter: 89 mm
  • Outer diameter: 22 mm
Item no.:0605338
  • Height: 95 mm
  • Inner diameter: 24 mm
  • Outer diameter: 90 mm
Item no.:2100737
  • Position: Front right
  • Total length: 907 mm
  • Splines gearbox side: 22
  • Splines wheel side: 26
Item no.:2199627
  • Position: Front right
  • Total length: 907 mm
  • Splines gearbox side: 22
  • Splines wheel side: 26
  • ABS teeth: 43
Item no.:1185435
  • Position: Front left
  • Total length: 618 mm
  • Splines gearbox side: 22
  • Splines wheel side: 26
Item no.:1183046
  • Position: Front left
  • Total length: 618 mm
  • Splines gearbox side: 22
  • Splines wheel side: 26
  • ABS teeth: 43
Item no.:0563901
  • Position: Outer
  • Seal diameter: 49 mm
  • Inner splines: 32
  • Outer splines: 26
  • Joint diameter: 91,8 mm
Item no.:114025
  • Position: Front left
  • Total length: 641 mm
  • Splines gearbox side: 22
  • Splines wheel side: 26
Showing 1–24 of 39 products

Rover 400 drivetrain components

The Rover 400 is a car that requires precision when it comes to driveline maintenance to preserve its characteristic driving feel. As a Swedish specialist in All car makes drivetrains, we understand the specific challenges faced by owners of this model. With a range of 33 carefully selected items, we cover everything from the smallest component to complete assemblies. Investing in the right parts for your Rover 400 is not merely about fixing a fault; it is about ensuring the entire power transmission system functions smoothly without friction or imbalance. By choosing components with an exact fit, you reduce wear on adjacent parts such as wheel bearings and gearbox output seals, preventing costly future repairs.

How the Rover 400 drivetrain is engineered

The Rover 400 drivetrain uses a classic front-wheel-drive design that places high demands on drive shaft flexibility. The engine delivers power to the gearbox, which in turn distributes torque via the drive shafts to the front wheels. Each side consists of an inner joint allowing axial movement as the suspension articulates up and down, and an outer joint facilitating steering. For cars fitted with anti-lock braking, an ABS ring for the Rover 400 plays a crucial role, mounted directly on the outer constant velocity joint. This reluctor ring is read by a wheel-speed sensor that relays data to the ABS control module. If this signal is interrupted by a damaged ring, the vehicle's overall braking performance and safety systems are compromised.

Common symptoms and driveline faults

Spotting drivetrain issues early is essential to trouble-free Rover 400 ownership. One of the most distinctive signs of wear is a rhythmic clicking noise on full steering lock, almost always pointing to a worn outer CV joint on your Rover 400. If you instead notice vibrations that build with road speed or during heavy acceleration, it often indicates a bent driveshaft or excessive play in the inner joints. Another frequent problem is an ABS warning lamp illuminating intermittently or permanently. This is typically caused by rust forming beneath the ABS ring, cracking or distorting it so that the sensor can no longer read the teeth accurately.

Popular Rover 400 replacement parts

When it is time for a repair, CVJoint24 has organised our range to make selection straightforward. Our 33 items for the Rover 400 break down as follows:

  • Drive shafts: We supply 21 different drive shaft variations for the Rover 400, covering most engine and gearbox configurations.
  • Outer CV joints: With 10 specific parts for the Rover 400 outer CV joint, we ensure a solution matching original specifications.
  • ABS rings: We stock 2 ABS ring variants for the Rover 400 to quickly resolve sensor signal faults in the braking system.

These components are vital for vehicle operation, and we always advise inspecting the CV boots during replacement; a split boot allows grit to enter and rapidly ruins new components.

Finding the right parts for your Rover 400

Navigate directly to the relevant section for your Rover 400:

When addressing driveline symptoms, starting in the right subcategory is crucial. By browsing the specific Rover 400 product sections, it is easy to pinpoint whether you need a drive shaft, CV joint or propeller shaft, directing you to the parts that match your symptoms and technical specifications.

Selecting the exact replacement part can sometimes be tricky, as dimensions vary between engine variants and production years. To ensure a correct fit, always select your vehicle by make, model and engine variant in our store selector. This narrows our catalogue of 33 parts down to the items engineered specifically for your car, removing guesswork regarding ABS tooth counts or drive shaft lengths. Should you have any technical questions, our driveline specialists are on hand to guide you through the specifications so that your repair goes smoothly the first time.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, combining expert technical knowledge with extensive stock. We focus exclusively on the drivetrain, allowing us to supply components engineered for precise fitment and lasting durability. Our extensive coverage for the Rover 400 means we regularly stock items that generic car parts retailers do not carry. When you order from us, you get high-quality spare parts alongside the assurance of buying from specialists who know the engineering requirements of your vehicle inside out. We continually update our vehicle data to ensure you receive the right part for your car quickly and reliably across the EU.

Frequently Asked Questions about Drivetrain Parts for Rover 400

How do I know if my Rover 400 needs a new drive shaft?

The most common symptoms are vibrations through the car under acceleration or a knocking noise while driving. If the vibrations stop when you release the throttle, it is often a worn inner CV joint or the drive shaft itself.

Why is there a clicking noise when I turn in my Rover 400?

A clicking sound on full lock is a classic symptom of a worn outer CV joint. It usually happens because a CV boot has split, causing the grease to leak out and dirt to enter the joint.

Do all ABS rings fit all Rover 400 models?

No, the tooth count and diameter can vary depending on the model year and engine. We recommend selecting your specific make, model and engine to find the exact replacement ABS ring.

Can I replace just the CV joint instead of the complete drive shaft?

Yes, if the shaft itself is straight and undamaged, you can often replace just the outer or inner CV joint, which is a cost-effective way to repair the drivetrain.

What is included when I buy an outer CV joint from you?

Our CV joint kits are supplied complete with the CV joint, model-specific CV boot, high-quality grease, circlips and fitting hardware for a hassle-free installation.

Why is the ABS warning light on in my Rover 400?

This is often caused by a cracked ABS ring on the drive shaft due to corrosion, preventing the sensor from reading the wheel speed correctly.