Skoda Roomster 1.2 TSI

Welcome to CVJoint24, the international shop of a Swedish driveline specialist catering for your Skoda Roomster 1.2 TSI. Maintaining your power transmission is vital for safety and...

Products for Skoda Roomster 1.2 TSI

17 products
1 - 17 of 17
Item no.:0445081
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 100 mm
  • Total length: 34 mm
  • Joint diameter: 100 mm
Item no.:0575351
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 52 mm
  • Outer splines: 36
  • Thread size: M16X1,5
Item no.:0532941
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 52 mm
  • Outer splines: 36
  • Thread size: M16X1,5
Item no.:1131336
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 505 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:2144582
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 752 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:7309156
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 94 mm
  • Total length: 32 mm
  • Joint diameter: 94 mm
Item no.:1198256
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 480 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:2155743
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 770 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:3573374
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 52 mm
  • Outer splines: 36
  • Thread size: M16X1,5
Item no.:1110159
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 500 mm
  • Joint diameter: 90 mm
  • Flange diameter: 100 mm
Item no.:1146969
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 478 mm
  • Joint diameter, gearbox side: 100 mm
  • Seal ring diameter: 52 mm
Item no.:0614567
  • Total length: 101 mm
Item no.:0643625
  • Total length: 111 mm
Item no.:0919386
  • Inner diameter: 38 mm
  • Outer diameter: 63 mm

Drivetrain for Skoda Roomster 1.2 TSI

The Skoda Roomster 1.2 TSI is a versatile car that pairs ample space with an efficient engine, but to keep this combination running at its best, a drivetrain in top condition is essential. The drivetrain is the system that transfers the engine's torque to the road, and in a car like the Roomster—often used for family duties and heavier loads alike—these components are subjected to substantial stress. Here at CVJoint24, you will find a dedicated range covering the most common requirements for this specific model. We understand the importance of parts fitting perfectly the first time, which is why we focus on technical precision and thorough documentation. By choosing the right Skoda Roomster parts, you extend your car's service life and retain its characteristic handling. Our range includes everything from complete drive shafts to specific joint kits, all tailored to the unique demands of the Roomster's front-wheel-drive setup. Investing in quality parts is not just a matter of safety, but also of protecting your car's reliability and running costs over time.

How the drivetrain is engineered on the Skoda Roomster 1.2 TSI

The layout of the drivetrain on a Skoda Roomster 1.2 TSI follows a proven front-wheel-drive configuration optimised for both comfort and efficiency. Power is produced by the turbocharged 1.2 TSI engine and transmitted through the gearbox to the two drive shafts. It is worth noting that the left and right drive shafts often differ in length due to the offset positioning of the gearbox, which is a crucial detail when replacing them. Each driveshaft is equipped with two joints: an inner CV joint closest to the gearbox and an outer joint at the wheel hub. The inner joint is engineered to accommodate axial plunge as the suspension moves up and down, while the outer joint is a constant velocity joint that allows for large steering angles without jerky power delivery. To protect these precision components, robust CV boots made of high-grade rubber or thermoplastic are used, packed with specialised grease to minimise friction and heat build-up. If a CV boot splits, the joint is instantly exposed to road dirt, water and salt, which quickly degrades the grease and leads to severe mechanical wear.

Common faults and symptoms

There are several distinct signs that the drivetrain in your Skoda Roomster 1.2 TSI is approaching the end of its working life. One of the most typical symptoms is a rhythmic clicking or knocking noise clearly heard when making sharp turns at low speeds. This noise almost invariably indicates that an outer CV joint has suffered contamination or lost its grease. If you experience vibrations through the vehicle floor or seats instead—particularly under brisk acceleration—it often points to play having developed in an inner CV joint. Unlike wheel imbalance, which usually appears at specific speeds, drivetrain vibrations are directly tied to engine load. Another critical warning sign to watch for is grease splattered across the inside of the wheel rim or the wheel arch. This is definitive evidence of a split CV boot. Ignoring these warning signs can cause the joint to seize, which in the worst-case scenario can see the drive shaft detach and cause extensive damage to the suspension or gearbox. Regular visual inspections of your CV joint boots are therefore inexpensive insurance against costly garage bills.

Common parts to replace on the Skoda Roomster 1.2 TSI

For the Skoda Roomster 1.2 TSI, maintenance and driveline repairs typically involve three main categories of parts. We stock an extensive and carefully matched selection that includes the following components for your vehicle:

  • Drive shaft for Skoda Roomster 1.2 TSI – A complete assembly including both inner and outer joints as well as fitted CV boots. This is often the most cost-effective option in terms of workshop labour.
  • Outer CV joint for Skoda Roomster 1.2 TSI – Frequently replaced on its own if the boot has failed only recently and the shaft itself remains in sound condition.
  • Inner CV joint for Skoda Roomster 1.2 TSI – A critical component for eliminating driveline vibrations and restoring smooth power delivery from the engine.

Deciding between replacing an individual constant velocity joint or the entire drive shaft depends on the extent of the wear. For Roomster owners with the 1.2 TSI engine, we stock several drive shaft variants to cater for all technical specifications. It is also wise to inspect the ABS ring when renewing the outer joint, as these are frequently seated directly on the joint and can compromise braking safety systems if cracked or corroded.

How to find the right part for your Skoda Roomster 1.2 TSI

Navigate to the relevant subcategory for your Skoda Roomster 1.2 TSI:

On a vehicle with several possible driveline faults, it is best to start in the correct category straight away. Comparing the exact component sections for the Skoda Roomster 1.2 TSI makes it straightforward to distinguish between issues with drive shafts, CV joints or propeller shafts, guiding you to the page that best matches your symptoms and fitment needs.

Finding the correct replacement part for a modern car like the Skoda Roomster 1.2 TSI requires attention to detail, as subtle technical variations determine whether a part fits. At CVJoint24, we remove the guesswork by letting you filter accurately by make, model and engine variant. This ensures you find the components verified for your exact vehicle. Even so, it is always sensible to check key details such as the tooth count on the ABS reluctor ring or the spline count on the shaft, particularly if the vehicle has had previous repairs. Because the 1.2 TSI engine was produced in various outputs and mated to different gearbox types, precise matching is essential. We also recommend replacing components in pairs, or at least inspecting the opposite side, as wear is usually fairly even across both sides. If you are ever unsure which part you need, our customer support team is on hand with technical guidance to help you order correctly first time and avoid delays.

Why buy from CVJoint24?

Why choose CVJoint24 for your Skoda Roomster 1.2 TSI? The answer lies in our dedicated focus. As the international shop of a Swedish driveline specialist, we have an expertise that general car-parts suppliers cannot match. We do not sell wiper blades or air fresheners; our business is dedicated entirely to power transmission, giving you deeper technical insight and an extensive range. When you shop with us, you benefit from our fitment guarantee when matching parts to your exact model details. We know that time matters—especially when your car is booked into a garage—so we prioritise prompt dispatch across the EU from our warehouse in Helsingborg, Sweden. Our car parts are hand-selected from reliable manufacturers to meet or exceed original equipment standards. With a wide selection for the Roomster 1.2 TSI in stock, you can rely on us to have what you need. Choose a specialist that understands your vehicle's technical needs—choose CVJoint24 for a secure and straightforward purchase.

Frequently Asked Questions about Drivetrain for Skoda Roomster 1.2 TSI

How do I know if the drive shaft on my Skoda Roomster 1.2 TSI is faulty?

The most common signs are clicking noises when cornering (outer joint) or vibrations under acceleration (inner joint or shaft imbalance).

Can I replace just the boot instead of the entire CV joint?

Yes, if you catch the damage early and the joint has not started to make noises or vibrate, replacing the CV boot and repacking it with fresh grease can be sufficient.

Does the same drive shaft fit both manual and DSG gearboxes?

No, length and fittings often differ between gearbox types. Always select your exact make, model and engine variant to ensure you receive the correct version.

Why is there a clicking noise when I turn in my Roomster?

This is usually due to a worn outer CV joint, which in turn is often caused by a split CV boot that has allowed dirt and grit inside.

How quickly will my parts arrive?

We always aim for fast dispatch from our warehouse so that you can repair your car as quickly as possible.

Are grease and clamps included when I buy a CV joint kit?

Yes, our CV joint kits are complete and normally include the joint, CV boot, grease, clamps and mounting hardware.