Inner CV joints for Skoda Roomster 1.2 TSI

Looking for a high-quality inner CV joint for your Skoda Roomster 1.2 TSI? You have come to the right place. As Swedish driveline specialists, we supply components precisely matched to...

Products for Inner CV joints for Skoda Roomster 1.2 TSI

2 products
1 - 2 of 2
Item no.:0445081
  • Position: Inner
  • Seal diameter: 100 mm
  • Inner splines: 33
  • Joint diameter: 100 mm
Item no.:0426556
  • Position: Inner
  • Seal diameter: 94 mm
  • Inner splines: 33
  • Number of joints: 3
  • ABS teeth: 0

Inner CV joints for Skoda Roomster 1.2 TSI

The inner CV joint is a critical component in the power transmission of your Skoda Roomster 1.2 TSI. Known for its practical design and efficient engine, this model requires components engineered to withstand the stresses of everyday driving. Mounted closest to the gearbox, an inner CV joint transmits torque from the engine to the drive shaft whilst accommodating the up-and-down movement of the suspension. We supply parts carefully selected to meet or exceed original specifications, ensuring seamless integration with your vehicle's running gear. Choosing the correct replacement part is essential to preserve your car's road behaviour and safety, especially with the smooth torque delivery of the 1.2 TSI engine, which places specific demands on drivetrain integrity.

What does the inner CV joint do on a Skoda Roomster 1.2 TSI?

On a front-wheel-drive car such as the Skoda Roomster 1.2 TSI, the inner CV joint performs a different task from the outer joint. Whilst the outer joint accommodates steering angles, the inner joint handles the plunge motion caused by the wheels travelling over bumps and uneven road surfaces. It functions as a sliding joint that compensates for the changing distance between the gearbox and the wheel hub during driving. Without a properly functioning inner constant velocity joint, the drive shaft would be subjected to severe tension and binding, quickly leading to failure in either the gearbox or the suspension. On the 1.2 TSI variant, it is vital that this link remains robust and thoroughly lubricated, as it transfers power directly from the transmission before it reaches the wheels.

Common signs of wear

Several clear warning signs indicate that an inner CV joint on your Skoda Roomster 1.2 TSI is worn or damaged. The most prominent symptom is vibration through the body of the car during acceleration. Unlike wheel imbalance, which tends to appear at specific speeds regardless of throttle input, vibrations from an inner CV joint are directly linked to engine load. You may also notice a knocking or clicking noise when lifting off the throttle or changing gear, pointing to play within the joint's internal bearings. Another critical warning sign is a split or torn CV boot; if the specialised CV joint grease leaks out and dirt enters, the precision-machined contact surfaces degrade rapidly. Regular inspection of the drive shaft boots is an inexpensive precaution against far more costly repairs later on.

How to choose the correct inner CV joint

Identifying the exact replacement inner CV joint for your Skoda Roomster 1.2 TSI can sometimes be tricky, as dimensions can vary depending on the production year or the specific gearbox fitted. The most critical step is to verify the spline count on both the side entering the gearbox and the side mating with the drive shaft. The diameter of the sealing surface and the overall length of the joint are also essential dimensions to check. To make finding the right car parts as straightforward and dependable as possible, we recommend selecting your exact make, model and engine variant in our store. This filters our catalogue down to the parts verified to fit your car, eliminating guesswork and saving valuable time in the workshop.

Related parts to inspect

Be sure to check these related pages for the same vehicle when working on an inner CV joint:

When one drivetrain component shows signs of wear, nearby parts on the same car often require attention as well. Comparing these exact pages for the Skoda Roomster 1.2 TSI makes it easier to determine whether the issue lies purely with the inner CV joint or with an adjacent section of the driveline.

This is particularly true for models where vibrations, play and noises can transfer between interconnected drivetrain components. A quick check of related categories reduces the risk of replacing the right type of component whilst overlooking an adjacent part causing the same symptoms.

Renewing related components at the same time can save significant labour and money in the long term, as removing the driveshaft represents the bulk of the workshop time.

Why shop with CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, supplying everything from small circlips to complete propeller shafts from our central warehouse in Helsingborg, Sweden. We understand how important it is to get the correct part for your Skoda Roomster 1.2 TSI first time, which is why we provide an accurate fitment guarantee across our entire range. Backed by extensive stock and dedicated technical expertise, we offer durable solutions at competitive prices. We know you rely on your car every day, so we utilise fast EU-wide logistics to get your spare parts delivered without unnecessary delay. Rely on CVJoint24 for dependable parts and a reliable drivetrain.

Frequently Asked Questions about Inner CV Joints for Skoda Roomster 1.2 TSI

How do I know whether the inner or outer CV joint is failing on my Skoda Roomster?

A worn inner CV joint usually causes vibrations throughout the entire car under acceleration, whereas a faulty outer CV joint produces a distinct clicking noise when turning sharply.

Can I replace just the inner CV joint on my Skoda Roomster 1.2 TSI?

Yes, on the Skoda Roomster 1.2 TSI the inner CV joint is an individual component that can be replaced separately without needing to buy a complete drive shaft, provided the shaft itself is undamaged.

What tools are needed to replace an inner CV joint?

You will generally need a socket set, Hex or Torx bits for the joint bolts, CV boot clamp pliers, and standard tools to release the drive shaft from the hub.

Are grease and a CV boot included when I buy an inner CV joint from you?

Yes, our inner CV joints are supplied as complete kits containing the joint itself, a model-specific CV boot, high-quality grease, and all necessary fitting hardware.

Why does my Skoda Roomster 1.2 TSI vibrate during acceleration?

Vibrations under acceleration are a classic symptom of a worn inner constant velocity joint, which causes an imbalance in power transmission when the engine is under load.

How long does it take to replace an inner CV joint on this model?

For an experienced DIY mechanic or technician, the replacement typically takes between 1 and 2 hours per side, depending on access to a vehicle lift and having the right tools to hand.