Skoda Superb III

Spare parts and drivetrain components for the Skoda Superb III.

Choose version

Choose a version to refine the results and get closer to the right product.

Products for Skoda Superb III

30 products
1 - 24 of 30
Item no.:2176562
  • Position: Front right
  • Total length: 910 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:1166175
  • Position: Front left
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:0697626
  • Height: 85 mm
  • Inner diameter: 22 mm
  • Outer diameter: 80 mm
Item no.:0499320
  • Position: Inner
  • Seal diameter: 94 mm
  • Inner splines: 33
  • Number of joints: 3
  • ABS teeth: 0
Item no.:626072
  • Number of joints: 1
  • Total length: 2,160 mm
Item no.:217518
  • Position: Front right
  • Flange diameter: 108 mm
  • Joint diameter: 108 mm
  • Total length: 795 mm
  • Splines wheel side: 36
Item no.:114352
  • Position: Front left
  • Total length: 557 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:110746
  • Flange diameter: 108 mm
  • Total length: 500 mm
  • Splines wheel side: 36
Item no.:219826
  • Flange diameter: 119 mm
  • Total length: 590 mm
  • Splines wheel side: 36
Item no.:0476826
  • Position: Inner
  • Seal diameter: 40 mm
  • Inner splines: 34
  • Outer splines: 37
Item no.:110834
  • Position: Front left
  • Diameter: 83 mm
  • Flange diameter: 100 mm
  • Total length: 524 mm
  • ABS teeth: 0
Item no.:110274
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 525 mm
  • Splines wheel side: 36
Item no.:215517
  • Position: Front right
  • Flange diameter: 100 mm
  • Total length: 815 mm
  • Splines wheel side: 36
  • ABS teeth: 0
Item no.:410609
  • Position: Rear left
  • Diameter: 94 mm
  • Flange diameter: 94 mm
  • Total length: 611 mm
  • ABS teeth: 0
Item no.:514403
  • Position: Rear right
  • Diameter: 83 mm
  • Flange diameter: 94 mm
  • Total length: 650 mm
  • ABS teeth: 0
Item no.:2147826
  • Position: Front right
  • Total length: 910 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:0679615
  • Height: 85 mm
  • Inner diameter: 22 mm
  • Outer diameter: 80 mm
Item no.:628152
  • Number of joints: 1
  • Total length: 2,160 mm
Item no.:112824
  • Position: Front left
  • Total length: 557 mm
  • Splines gearbox side: 37
  • Splines wheel side: 36
Item no.:0420260
  • Position: Inner
  • Seal diameter: 40 mm
  • Inner splines: 34
  • Outer splines: 37
Item no.:0628320
  • Height: 85 mm
  • Inner diameter: 22 mm
  • Outer diameter: 80 mm
Item no.:629291
  • Number of joints: 1
  • Total length: 2,160 mm
Item no.:0679627
  • Height: 85 mm
  • Inner diameter: 22 mm
  • Outer diameter: 80 mm
Item no.:625272
  • Number of joints: 1
  • Total length: 2,160 mm
Showing 1–24 of 30 products

Drivetrain for Skoda Superb III

The Skoda Superb III represents the pinnacle of Skoda engineering, offering a driving experience that blends comfort with advanced technology. To maintain this standard, a fully functioning drivetrain is absolutely crucial. The drivetrain in a Skoda Superb III is a sophisticated system responsible for transferring engine power to the wheels with minimal loss and maximum precision. As drivetrain specialists, we ensure you have access to components specifically developed to handle the high torque demands and durability requirements of this model.

When servicing your Skoda Superb III, it is vital not to compromise on quality. A worn drivetrain does not just cause noises and vibrations; it can also affect fuel consumption and overall vehicle stability. We focus on supplying parts that guarantee seamless integration with your car's existing systems. By choosing the right spare parts from the start, you extend the lifespan of your vehicle and ensure every journey remains as smooth as when the car left the showroom.

How the drivetrain is engineered on the Skoda Superb III

The drivetrain of the Skoda Superb III is built on the modern MQB platform, featuring a transverse engine layout that streamlines power delivery. Depending on the engine variant and trim level, the car is either front-wheel drive or fitted with an advanced all-wheel-drive system. At the heart of this system, precision components work in harmony to cope with everything from urban driving to motorway speeds. Power travels from the gearbox via drive shafts to the wheel hubs, where precision in every link is critical to prevent power loss.

For all-wheel-drive models, additional complexity comes in the form of a propeller shaft and a rear differential. Every component along this line—from the inner CV joints handling suspension articulation to the outer joints facilitating steering—is dimensioned to withstand the specific loads of a Skoda Superb III. Understanding this setup is key to selecting the correct spare parts when carrying out repairs. At CVJoint24, we provide the technical expertise needed to guide you through Skoda-specific driveline solutions.

Common faults and symptoms

Despite the high build quality of the Skoda Superb III, drivetrain components naturally experience wear over time. One of the most typical warning signs is a clicking noise when cornering sharply, which usually indicates that an outer CV joint is failing. If you instead experience vibrations through the steering wheel or the car's chassis under acceleration, it may point to a worn inner constant velocity joint or an unbalanced drive shaft. Addressing these symptoms promptly helps prevent costly consequential damage to the gearbox or wheel bearings.

Another critical area to monitor is the CV boots protecting the joints. If a boot tears, lubricating grease escapes while road dirt and moisture penetrate, quickly destroying the precision-machined bearing surfaces inside the joint. Routine inspection of these rubber components can save substantial repair costs down the line. If you spot grease splattered on the inside of the wheel rim or beneath the vehicle, it is time to inspect your Skoda Superb and its driveshafts to maintain dependable performance.

Common parts to replace on the Skoda Superb III

When repairing the drivetrain on this model, replacing complete assemblies is often far more cost-effective than attempting piecemeal repairs. The most frequently replaced part is undoubtedly the drive shaft. By installing a complete unit, you receive new inner and outer joints alongside factory-fitted CV boots in a single package, cutting workshop labour costs and boosting reliability. This is particularly beneficial on higher-torque engine variants, which place heavy demands on driveline components.

Alongside drive shafts, it is standard practice to inspect ABS rings and related mounting hardware during servicing. Because the Skoda Superb III is frequently driven on long motorway journeys, these parts endure exposure to road grit and salt, leading to corrosion. Choosing replacement parts manufactured with proper surface protection and high-grade materials is essential. We supply components tested to withstand demanding European road conditions and the daily stresses your Skoda encounters.

How to find the right part for your Skoda Superb III

Navigate directly to the relevant category for the Skoda Superb III:

With multiple potential drivetrain issues, it is best to start in the right subcategory straight away. By browsing our specific component ranges for the Skoda Superb III, you can easily distinguish between drive shaft, CV joint or prop shaft faults, and head to the section that best matches your symptoms and fitment needs.

Once you are in the correct category, simply select your car's make, model and engine, and verify technical specifications such as overall length and spline tooth counts if multiple options appear. Our customer support team is always on hand if you require assistance identifying the exact version for your vehicle, ensuring you get the perfect fit the first time.

Why buy from CVJoint24?

As the international shop of a Swedish driveline specialist, we offer an unmatched blend of technical expertise and comprehensive stock. We understand that when your Skoda Superb III is in the garage, vehicle downtime is costly; that is why we dispatch quickly from our warehouse in Helsingborg, Sweden, delivering swiftly across the EU. Because our focus is dedicated entirely to drivetrain components, we deliver specialised product knowledge that generic car parts retailers often lack. We supply reliable parts with absolute peace of mind.

Every order is backed by our fitment guarantee, so you can buy with total confidence. We aim to ensure you get the right component straight away, every time. Combining premium-grade products with competitive pricing and genuine driveline expertise, we are the trusted choice for discerning Skoda owners. Experience the advantage of shopping with a dedicated specialist and give your Skoda Superb III the quality parts it deserves.

Frequently Asked Questions about Drivetrain for Skoda Superb III

How do I know if my Skoda Superb III needs a new drive shaft?

The most common signs are clicking noises on full lock or vibrations during acceleration. If you notice a torn CV boot and grease has leaked out, there is a high risk that the shaft needs replacing.

Does the same drive shaft fit both manual and DSG gearboxes?

No, drive shafts usually differ depending on the gearbox type. It is therefore very important to select your Skoda Superb III by make, model and engine variant to find the correct version.

Do you offer a fitment guarantee on parts for Skoda Superb III?

Yes, we offer a precise fitment guarantee. When you select your vehicle's correct model and engine and order the recommended part, we guarantee it will fit your car.

What is the advantage of replacing the complete drive shaft rather than just a CV joint?

Replacing the complete shaft is often more time-efficient and provides greater reliability, as all wearing components—including both the inner and outer CV joints and boots—are replaced at the same time.

How quickly can I receive my spare parts?

We aim for next-day dispatch on all in-stock items, ensuring your Skoda Superb III is back on the road as quickly as possible.

Is there a difference in drive shafts between front-wheel drive and 4x4 models?

Yes, four-wheel-drive models use specific drive shafts front and rear that differ from front-wheel-drive versions in both overall length and fitment.