Suzuki Baleno

Spare parts and drivetrain components for the Suzuki Baleno.

Products for Suzuki Baleno

75 products
25 - 48 of 75
Item no.:0987305
  • Inner diameter: 40 mm
  • Outer diameter: 58 mm
Item no.:3455848
  • Position: Inner
  • Inner splines: 21
  • Outer diameter: 73 mm
Item no.:3446572
  • Position: Inner
  • Inner splines: 21
  • Outer diameter: 72 mm
  • Splines wheel side: 22
Item no.:2119224
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 570 mm
  • Diameter 1: 69 mm
Item no.:1174636
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 580 mm
  • Joint diameter: 69 mm
Item no.:0541752
  • Position: Outer
  • Inner splines: 22
  • Seal diameter: 49 mm
  • Outer splines: 25
  • Thread size: M22X1,5
Item no.:0523100
  • Position: Outer
  • Inner splines: 22
  • Splines wheel side: 25
  • Seal diameter: 49 mm
  • ABS teeth: 42
Item no.:2176812
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 566 mm
  • ABS teeth: 42
Item no.:1104174
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 592 mm
  • ABS teeth: 42
Item no.:1155239
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 631 mm
  • ABS teeth: 42
Item no.:1111303
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 631 mm
Item no.:1128792
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 591 mm
Item no.:1158199
  • Position: Front left
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 595 mm
Item no.:2127843
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 566 mm
Item no.:2101409
  • Position: Front right
  • Splines gearbox side: 26
  • Splines wheel side: 25
  • Total length: 570 mm
Item no.:1131909
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 591 mm
  • ABS teeth: 42
Item no.:2161344
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 615 mm
  • Diameter 1: 68 mm
Item no.:1187502
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 635 mm
  • Diameter 1: 68 mm
Item no.:2178303
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 925 mm
Item no.:116166
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 664 mm
Item no.:1155419
  • Position: Front left
  • Splines wheel side: 25
  • Joint diameter: 74 mm
Item no.:2164270
  • Position: Front right
  • Splines wheel side: 25
  • Joint diameter: 74 mm
Item no.:0612077
  • Total length: 96 mm
Item no.:290753
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 22
  • Total length: 298 mm
Showing 25–48 of 75 products

Drivetrain for Suzuki Baleno

The drivetrain on a Suzuki Baleno is a critical assembly responsible for transferring engine power to the wheels efficiently. As a compact and dependable car, the Baleno relies on these components being in sound mechanical condition to maintain both fuel economy and driving comfort. At CVJoint24, you will find a carefully curated range tailored specifically to this model, whether for the classic hatchback or the estate version. We focus on quality and durability, which is essential for preventing costly consequential damage to the gearbox or suspension. By choosing the correct parts from a specialist, you ensure that your car preserves its original handling characteristics for many miles to come.

How the drivetrain is designed on the Suzuki Baleno

The Suzuki Baleno uses a traditional front-wheel-drive layout where power is directed from the engine via the gearbox out to the front wheels through two drive shafts. Central to this setup are the driveshafts, which comprise an inner and an outer CV joint protected by rubber CV boots packed with specialised grease. The inner joint accommodates the axial movements caused by suspension travel, whilst the outer CV joint allows for steering articulation and wide angle changes during cornering. Furthermore, the ABS ring is often mounted directly onto the outer joint to provide accurate wheel-speed signals to the vehicle's safety systems. This configuration is compact and efficient, yet subject to heavy stresses from road grime, salt, and mechanical wear, making routine inspection of boots and joints essential to prevent breakdown.

Common faults and symptoms

There are several distinct signs indicating that the drivetrain on your Suzuki Baleno is worn and requires attention. One of the most typical symptoms is a clicking or knocking noise when accelerating on full steering lock, which almost invariably points to a failing outer constant velocity joint. If you instead notice steering-wheel vibrations or body shudder under acceleration, it may suggest an imbalance or internal wear within a drive shaft. Another frequent issue on older models is the ABS warning light illuminating unexpectedly, usually caused by a cracked or corroded ABS reluctor ring sending faulty data to the sensor. Ignoring these warning signs can result in complete failure and total loss of drive, which is costly and potentially hazardous on the road.

Common replacement parts for Suzuki Baleno

Based on our sales statistics and workshop experience, three main categories are most frequently in demand to restore the drivetrain on the Suzuki Baleno. We currently stock a broad selection of items covering most requirements for this model range. Here are the most sought-after categories for the Suzuki Baleno:

  • Drive shafts for Suzuki Baleno – We offer 17 different complete shafts for a straightforward, direct replacement of the entire assembly.
  • Outer CV joints for Suzuki Baleno – With multiple variants in stock, you can easily find the correct joint to cure noises when turning.
  • ABS rings for Suzuki Baleno – A cost-effective solution when a damaged reluctor ring causes sensor fault codes.

Replacing worn components promptly extends the lifespan of the entire transmission system and avoids unnecessary repairs to neighbouring parts such as wheel bearings and gearbox oil seals.

How to find the right part for your Suzuki Baleno

Navigate directly to the appropriate section for your Suzuki Baleno:

On a vehicle with several potential drivetrain issues, starting directly in the relevant category is key. By comparing the exact component sections for the Suzuki Baleno, it becomes easier to differentiate between faults in a drive shaft, CV joint, or propeller shaft, taking you straight to the page that matches your symptoms and fitment.

Selecting the right spare part for a Suzuki Baleno can sometimes be tricky due to technical variations across engine sizes, gearbox types, and specific production years. The most reliable way to find the correct fit is to select your vehicle by its exact make, model, and engine variant. Filtering by these specifications automatically displays the components compatible with your car, ruling out ordering errors and saving valuable workshop time. If you need confirmation on specific details such as the tooth count on an ABS ring or the overall length of a drive shaft, comprehensive technical specifications are provided for every product. We want you to feel entirely confident that your order will fit your car without any need for modifications.

Why shop with CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dedicated to supplying precise-fit parts across the European Union from our central warehouse in Helsingborg, Sweden. We understand how crucial exact compatibility is, which is why we provide exceptional category depth for the Suzuki Baleno that generic car-parts retailers struggle to match. Our specialist focus allows us to offer components that match or exceed original equipment standards at a much more competitive price. Backed by fast dispatch and an expert customer support team well-versed in driveline engineering, we are the trusted choice for DIY mechanics and professional garages alike. Shopping with us means your Suzuki gets dependable, specialist-grade components every time.

Frequently Asked Questions about Drivetrain for Suzuki Baleno - Power Transmission Spare Parts

How do I know if my Suzuki Baleno needs a new drive shaft?

The most common signs are vibrations through the car under acceleration or distinct unusual noises. If the vibrations stop when you release the throttle, it is often the inner joint on the drive shaft that is worn.

Can I replace just the CV joint or does the entire shaft need replacing on my Baleno?

It depends on the extent of the damage. If only the outer joint clicks when cornering, you can replace just that. If the shaft is bent or both joints are worn, it is often more cost-effective and easier to replace the complete drive shaft.

Why is the ABS warning light on in my Suzuki Baleno?

A very common fault on the Baleno is that the ABS ring on the drive shaft corrodes and cracks. This causes the sensor to receive incorrect readings, triggering the warning light. We supply individual ABS rings that are straightforward to replace.

Do all CV joints fit every Suzuki Baleno model?

No, there are differences depending on the engine (such as 1.3, 1.6, or 1.8) and whether the car is equipped with ABS. Always select your car's make, model and engine on our website to find the correct specification.

What happens if a CV boot splits?

If the boot splits, the grease leaks out and dirt gets into the joint. This will cause the CV joint to wear out very quickly. Replacing a damaged boot immediately can save you the cost of a complete constant velocity joint.

Is it difficult to replace an ABS ring yourself on a Baleno?

It requires separating the CV joint from the wheel hub, but it is a standard job for a competent DIY mechanic. The old ring is tapped off and the new one is pressed or heat-shrunk into place.