Suzuki Ignis

Spare parts and drivetrain components for Suzuki Ignis.

Products for Suzuki Ignis

30 products
1 - 24 of 30
Item no.:0317611
  • Position: Front
  • ABS teeth: 43
  • Inner diameter: 63 mm
  • Outer diameter: 72 mm
  • Width: 8 mm
Item no.:2167096
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 632 mm
  • ABS teeth: 43
Item no.:334993
  • ABS teeth: 43
  • Inner diameter: 63 mm
  • Outer diameter: 72 mm
  • Width: 8 mm
Item no.:0566109
  • Position: Outer
  • Inner splines: 28
  • Seal diameter: 49 mm
  • Outer splines: 25
  • ABS teeth: 43
Item no.:1197019
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 615 mm
  • ABS teeth: 43
Item no.:7317110
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 610 mm
  • ABS teeth: 43
Item no.:350266
  • Position: Outer
  • Inner splines: 20
  • Seal diameter: 49 mm
  • Outer splines: 25
  • ABS teeth: 43
Item no.:0550082
  • Position: Outer
  • Inner splines: 20
  • Seal diameter: 49 mm
  • Outer splines: 23
  • ABS teeth: 43
Item no.:3592616
  • Position: Outer
  • Inner splines: 20
  • Splines wheel side: 25
  • Outer diameter: 72 mm
  • ABS teeth: 43
Item no.:2124293
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 607 mm
  • Joint diameter: 78 mm
  • ABS teeth: 43
Item no.:1192596
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 610 mm
  • ABS teeth: 43
Item no.:3564378
  • Position: Outer
  • Inner splines: 19
  • Seal diameter: 49 mm
  • Outer splines: 23
  • ABS teeth: 43
Item no.:3584437
  • Position: Front, Outer
  • Inner splines: 19
  • Seal diameter: 49 mm
  • Outer splines: 23
  • Thread size: M18X1,5
Item no.:1136960
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 620 mm
  • ABS teeth: 43
Item no.:2102467
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 610 mm
  • ABS teeth: 43
Item no.:352783
  • Position: Front, Outer
  • Inner splines: 29
  • Seal diameter: 49 mm
  • Outer splines: 25
  • ABS teeth: 43
Item no.:2126002
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 895 mm
  • ABS teeth: 43
Item no.:212925
  • Position: Front right
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 643 mm
  • ABS teeth: 43
Item no.:1106739
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 612 mm
  • ABS teeth: 43
Item no.:352139
  • Position: Front, Outer
  • Inner splines: 28
  • Splines wheel side: 25
  • Seal diameter: 49 mm
  • Thread size: M18X1,5
Item no.:1167447
  • Position: Front left
  • Splines gearbox side: 22
  • Splines wheel side: 25
  • Total length: 650 mm
Item no.:0629907
  • Outer diameter: 19 mm
  • Diameter: 69 mm
Item no.:339923
  • ABS teeth: 43
  • Inner diameter: 63 mm
  • Outer diameter: 72 mm
  • Width: 8 mm
Showing 1–24 of 30 products

Drivetrain for Suzuki Ignis

The Suzuki Ignis is a unique car that combines the agility of a supermini with the robustness of a crossover. Maintaining its characteristic driving dynamics requires a drivetrain in top condition. The drivetrain is the system that transfers power from the engine to the wheels, and on a Suzuki Ignis this often involves complex components that must work seamlessly together. At CVJoint24, we specialise in these exact parts so that you, as an owner, can find the right spare parts without hassle. With a range that covers everything from complete drive shafts to specific ABS rings, we ensure your vehicle remains reliable. Choosing the right parts for your exact model year and engine variant is crucial to avoid future issues and unnecessary wear on other transmission components.

How the Suzuki Ignis drivetrain is configured

The drivetrain on a Suzuki Ignis is engineered to be both lightweight and efficient, perfectly matching the car's compact footprint. Depending on whether your Ignis is front-wheel drive or equipped with four-wheel drive, component configurations vary. Power travels from the gearbox via the drive shafts out to the wheels. Each drive shaft is fitted with two joints: an inner CV joint closest to the gearbox and an outer CV joint at the wheel hub. The outer constant velocity joint is particularly critical, as it allows the wheel to steer and move with the suspension while maintaining continuous power delivery. On the Suzuki Ignis, these parts are dimensioned to handle both city motoring and light off-road use, but they face high stresses during every acceleration and turn. Understanding how these parts interact helps you spot when it is time for a replacement before complete failure occurs.

Common faults and symptoms

There are several clear warning signs that the drivetrain on your Suzuki Ignis is wearing out. One of the most common symptoms is a clicking or knocking sound on full steering lock under acceleration; this usually points to a failing outer CV joint. If you instead experience vibrations throughout the car under acceleration, it may be the inner CV joint or an unbalanced or damaged drive shaft. Another common fault is the ABS warning light illuminating on the instrument cluster. This is often caused by a cracked or corroded ABS ring, which disrupts the speed signal to the safety system. Paying attention to these early warnings allows you to resolve issues in good time and avoid more expensive repairs later on. Never ignore strange noises from the chassis, as a snapped driveshaft will leave the vehicle stranded without any drive.

Common parts to replace on the Suzuki Ignis

For the Suzuki Ignis, we have assembled a dedicated range covering the most common driveline repair needs. Our selection is tailored to meet strict demands for precise fit and durability on this model. Below you will find the most relevant product categories for your car:

  • Drive shafts for Suzuki Ignis – We supply complete shafts that simplify replacement and ensure perfect balance.
  • Outer CV joints for Suzuki Ignis – High-quality joints that restore precise steering and eliminate annoying noises.
  • ABS rings for Suzuki Ignis – Precision-engineered parts ensuring your ABS system operates correctly and safely.

By focusing on these core driveline areas, we offer specialist expertise that general car parts stores often lack. Every part is carefully chosen to match or exceed original equipment specifications, giving you complete peace of mind.

How to find the right part for your Suzuki Ignis

Proceed to the relevant subcategory for your Suzuki Ignis:

When diagnosing drivetrain faults, it is sensible to head straight to the correct subcategory. By comparing specific component areas for the Suzuki Ignis, it becomes much easier to distinguish between issues in a drive shaft, CV joint or propeller shaft, taking you to the section that best matches your symptoms and fitment.

Finding the exact replacement part for a Suzuki Ignis can sometimes be tricky, as variations exist across production years, gearbox types, and whether the car is four-wheel drive. The most reliable way to start is by selecting your car's make, model and engine variant in our search filter. This narrows down the parts that are technically compatible with your vehicle. It is still recommended to double-check specific technical details, such as the spline count on the drive shaft or the diameter of the ABS reluctor ring, as minor revisions occasionally occurred during production runs. If you are unsure which part fits, inspect the old part or count the splines before ordering. Our database is optimised to give you accurate suggestions, minimising the risk of ordering the wrong part and saving you time in the garage.

Why shop with CVJoint24

When you choose CVJoint24, you choose an international shop backed by a Swedish driveline specialist dedicated to drivetrain and power transmission components. We understand the technical nuances of the Suzuki Ignis and provide a range with depth and breadth few others can match. Our focus is delivering the right part at the right time, supported by a commitment to fitment derived from decades of industry experience. We stock our own products in our central Scandinavian warehouse, maintaining strict quality control and ensuring fast dispatch directly to you across the EU. As our customer, you receive not just premium spare parts, but also access to our collective technical knowledge in the drivetrain field. We strive to be the natural first choice for Suzuki owners seeking quality parts, specialist guidance, and a straightforward ordering experience whenever maintenance is due.

Frequently Asked Questions about Drivetrain Parts for Suzuki Ignis

How do I know if my Suzuki Ignis needs a new drive shaft?

Common signs include noticeable vibrations under acceleration or knocking noises from the undercarriage that increase with road speed.

Do all CV joints fit all Suzuki Ignis models?

No, specifications differ depending on the engine, gearbox and whether the vehicle is front-wheel drive or four-wheel drive. Always filter by your car's make, model and engine to find the correct part.

Why is the ABS warning light on in my Suzuki Ignis?

It is often caused by a cracked or corroded ABS ring sending incorrect signals to the sensor. This is a common issue that requires replacing the ring.

Is it difficult to replace an outer CV joint myself on an Ignis?

It requires specific tools and mechanical experience, but it is manageable for a skilled DIY mechanic. We advise checking the spline count before installation.

What is the advantage of buying a complete drive shaft?

A complete drive shaft saves time during installation and prevents imbalance issues, while replacing both the inner and outer joints in one go.

How quickly are spare parts delivered for my Suzuki?

As Swedish driveline specialists, we dispatch parts quickly from our central warehouse in Helsingborg, Sweden, to keep your vehicle's downtime to a minimum.