Volkswagen Bora 1.9 TDI

Spare parts and drivetrain components for the Volkswagen Bora 1.9 TDI. Check fitment by vehicle make, model and engine before ordering.

Products for Volkswagen Bora 1.9 TDI

26 products
1 - 24 of 26
Item no.:0528728
  • Position: Outer
  • Seal diameter: 53 mm
  • Inner splines: 30
  • Outer splines: 36
  • Joint diameter: 81 mm
Item no.:0678752
  • Position: Front
  • Diameter: 84 mm
  • Outer diameter: 23 mm
Item no.:0491689
  • Position: Inner
  • Seal diameter: 100 mm
  • Inner splines: 33
  • Joint diameter: 100 mm
Item no.:1172168
  • Position: Front left
  • Flange diameter: 100 mm
  • Total length: 556 mm
  • Splines wheel side: 36
Item no.:2163983
  • Position: Front right
  • Flange diameter: 100 mm
  • Total length: 822 mm
  • Splines wheel side: 36
Item no.:0450712
  • Position: Inner
  • Seal diameter: 108 mm
  • Inner splines: 30
Item no.:1139915
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 545 mm
  • Splines wheel side: 36
Item no.:2175270
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 809 mm
  • Splines wheel side: 36
Item no.:0450595
  • Position: Inner
  • Seal diameter: 123 mm
  • Inner splines: 34
Item no.:0537539
  • Position: Outer
  • Seal diameter: 53 mm
  • Inner splines: 27
  • Outer splines: 36
  • Joint diameter: 97,5 mm
Item no.:1143026
  • Position: Front left
  • Flange diameter: 123 mm
  • Total length: 518 mm
  • Splines wheel side: 36
Item no.:0452977
  • Position: Inner
  • Inner splines: 28
  • Joint diameter: 108 mm
Item no.:2115526
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 806 mm
  • Splines wheel side: 36
Item no.:2190704
  • Position: Front right
  • Flange diameter: 123 mm
  • Total length: 810 mm
  • Splines wheel side: 36
Item no.:0646993
  • Height: 85 mm
  • Inner diameter: 22 mm
  • Outer diameter: 80 mm
Item no.:212621
  • Total length: 812 mm
  • Splines wheel side: 36
Item no.:0689708
  • Position: Front
  • Total length: 88 mm
Item no.:350173
  • Position: Outer
  • Seal diameter: 53 mm
  • Inner splines: 27
  • Outer splines: 33
  • ABS teeth: 45
Item no.:352093
  • Position: Outer
  • Inner splines: 30
  • Outer diameter: 90 mm
  • Splines wheel side: 36
Item no.:0466053
  • Position: Inner
  • Seal diameter: 94 mm
  • Inner splines: 33
  • Number of joints: 3
  • ABS teeth: 0
Item no.:1179529
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 518 mm
  • Splines wheel side: 36
Item no.:0529068
  • Position: Outer
  • Seal diameter: 52 mm
  • Inner splines: 27
  • Outer splines: 36
  • Joint diameter: 98 mm
Item no.:340807
  • Position: Inner
  • Inner splines: 28
Showing 1–24 of 26 products

Drivetrain for Volkswagen Bora 1.9 TDI

The Volkswagen Bora 1.9 TDI is renowned for its robust diesel engine and characteristic high torque, which places specific and heavy demands on the car's drivetrain. Power transmission is the critical link between the engine and the road, and for a car with the 1.9 TDI engine, it is vital that components withstand the stresses generated under hard acceleration and heavy loads. With us, you will find a curated selection of 17 high-quality products tailored precisely to this model. As specialists, we understand that every detail counts when maintaining your car's performance and safety over time. By choosing the right spare parts, you extend the lifespan of your vehicle and ensure a stable driving experience across all road conditions. We focus on offering parts that meet or exceed original specifications to guarantee durable operation and minimal wear on other driveline components.

How the drivetrain is configured on the Volkswagen Bora 1.9 TDI

The layout of the drivetrain on a Volkswagen Bora 1.9 TDI follows a classic front-wheel-drive configuration with a transverse engine. Power is transmitted from the gearbox via the drive shafts to the front wheels. Each side of the car features an inner CV joint mounted against the gearbox and an outer CV joint located at the wheel hub. These joints are crucial, allowing both suspension travel and steering angles while transmitting power smoothly and continuously. For the 1.9 TDI version, these components are robustly dimensioned to handle the diesel engine's high torque output. It is a complex system where a precise fit is essential to prevent unnecessary wear on bearings and seals. An equally vital part of this setup is the CV boots, which protect the constant velocity joints from road dirt and keep the grease contained, preventing premature failures in the drivetrain.

Common faults and symptoms

Several clear symptoms indicate that the drivetrain in your Volkswagen Bora 1.9 TDI is wearing out and requires attention. One of the most common signs is a clicking or knocking sound clearly audible on full steering lock while driving, usually pointing to a damaged outer CV joint on your Volkswagen Bora 1.9 TDI or one that has run dry due to a split CV boot. If you instead experience vibrations through the steering wheel or body under heavy acceleration, it can indicate that an inner CV joint on your Volkswagen Bora 1.9 TDI is worn or has developed play. Furthermore, a cracked or damaged ABS ring on your Volkswagen Bora 1.9 TDI can trigger the ABS warning light on the dashboard or cause unexpected ABS intervention during normal braking. Ignoring these warning signs can result in costly consequential damage to the gearbox or, in the worst case, a complete breakdown on the road.

Common parts to replace on the Volkswagen Bora 1.9 TDI

For the Volkswagen Bora 1.9 TDI, specific components need replacement more frequently due to natural wear over the car's lifespan. Our range is tailored to meet these requirements with maximum precision. We offer 8 different complete drive shaft options to cover various model years and gearbox types, often providing the most economical solution for extensive wear. In addition, we stock 3 different outer CV joints and 5 inner CV joints for cases where only an individual joint needs replacing. To keep the braking system functioning properly, we also carry the exact ABS ring required for this model. Replacing a complete driveshaft on your Volkswagen Bora 1.9 TDI can often save substantial garage labour time compared to overhauling separate joints, especially if several components along the shaft show signs of fatigue or corrosion.

How to find the right part for your Volkswagen Bora 1.9 TDI

Go directly to the right category for your Volkswagen Bora 1.9 TDI:

When addressing driveline issues, it is best to start in the relevant category straight away. Comparing the specific subcategories for the Volkswagen Bora 1.9 TDI makes it easier to distinguish between faults in a drive shaft, CV joint or propeller shaft, directing you to the parts that match your symptoms and specifications.

Our database is updated continuously to help you find the correct match straight away, preventing incorrect orders and ensuring your new car parts fit first time.

Why shop with CVJoint24

CVJoint24 is your dedicated partner for Volkswagen drivetrain and power transmission components. As an international shop backed by a Swedish driveline specialist, we offer an extensive range alongside in-depth technical expertise. We recognise the importance of receiving the right car part immediately to avoid costly vehicle downtime, helping you select precisely by vehicle make, model and engine variant. With a focus on premium quality, competitive pricing and fast dispatch across the EU, we ensure your Volkswagen Bora 1.9 TDI is quickly and safely back on the road. Our aim is to provide the best buying experience for drivers who demand durability and dependable fitment. When ordering from us, you can rely on receiving the correct spare parts promptly to complete your repairs without unnecessary delays.

Frequently Asked Questions about Drivetrain Parts for Volkswagen Bora 1.9 TDI

How do I know if the drive shaft on my Bora 1.9 TDI needs replacing?

The most common signs are vibrations under acceleration or clicking noises when cornering. If the vibrations can be felt through the whole car when accelerating, it is often the inner joint or the shaft itself that is unbalanced or worn.

Does the same CV joint fit all Volkswagen Bora 1.9 TDI models?

No, there can be differences depending on the gearbox type (manual/automatic) and model year. Always select your car's make, model and engine to ensure you get a part with the correct number of splines and dimensions.

What is the difference between an inner and an outer CV joint?

The outer CV joint sits at the wheel and allows for steering angles, whereas the inner joint sits by the gearbox and primarily accommodates vertical suspension movement. The symptoms of failure differ between the two.

Why has the ABS warning light come on after replacing the CV joint?

This is often because the new CV joint lacks an ABS ring, has the wrong number of teeth on the ring, or the sensor is positioned too far from the ring. Always check that the ABS ring matches your original part.

Is it better to replace the complete drive shaft rather than just a CV joint?

In cases of extensive wear or if multiple CV boots are split, replacing the complete drive shaft is often more time-efficient and cost-effective. It also ensures that all components on the shaft are in brand-new condition.

How quickly will parts for my Volkswagen be delivered?

We aim for fast dispatch on all in-stock items. If you order in time on working days, your parts are normally dispatched the same day to minimise the time your car spends off the road.