Volkswagen Bora
Car parts and drivetrain components for Volkswagen Bora.
Products for Volkswagen Bora
- Position: Front left
- Flange diameter: 94 mm
- Total length: 556 mm
- Splines wheel side: 36
- Position: Front right
- Flange diameter: 94 mm
- Total length: 822 mm
- Splines wheel side: 36
- Position: Front right
- Total length: 815 mm
- Splines wheel side: 36
- Position: Inner
- Seal diameter: 94 mm
- Inner splines: 33
- Joint diameter: 94 mm
- Position: Outer
- Seal diameter: 53 mm
- Inner splines: 30
- Outer splines: 36
- Joint diameter: 81 mm
- Position: Front left
- Flange diameter: 108 mm
- Total length: 545 mm
- Splines wheel side: 36
- Position: Front left
- Flange diameter: 100 mm
- Total length: 545 mm
- Splines wheel side: 36
- Position: Front right
- Flange diameter: 100 mm
- Total length: 810 mm
- Splines wheel side: 36
- Position: Front right
- Flange diameter: 108 mm
- Total length: 655 mm
- Splines wheel side: 36
- Position: Outer
- Seal diameter: 53 mm
- Inner splines: 27
- Outer splines: 36
- Joint diameter: 97,5 mm
- Position: Front left
- Flange diameter: 123 mm
- Total length: 518 mm
- Splines wheel side: 36
- Position: Front right
- Flange diameter: 123 mm
- Total length: 810 mm
- Splines wheel side: 36
- Position: Front right
- Flange diameter: 108 mm
- Total length: 806 mm
- Splines wheel side: 36
- Diameter: 30 mm
- Hole spacing c/c: 188 mm
- Bearing thickness: 13 mm
- Number of centre bearings: 1
- Number of joints: 1
- Total length: 2,160 mm
Frequently Asked Questions about Volkswagen Bora Drivetrain Parts
How do I know whether the inner or outer CV joint is faulty on my Bora?
A worn outer CV joint typically produces a clicking or knocking noise on full steering lock while driving. A failing inner CV joint tends to cause noticeable vibrations through the car, especially under acceleration, but is usually quiet when cornering.
Does the same drive shaft fit both manual and automatic Volkswagen Bora models?
No, drive shafts usually differ between manual and automatic gearboxes in both length and mounting flange fitment. Always select your car's exact make, model and engine variant in our vehicle selector to find the correct version.
Why is the ABS warning light on in my Bora even though the brakes feel fine?
It is very common for the ABS ring on the drive shaft to have cracked or corroded away. This causes the wheel speed sensor to read incorrect signals, illuminating the warning light. We supply replacement ABS rings that can be installed separately.
Do all Volkswagen Bora models have a propeller shaft?
No, only models equipped with 4Motion four-wheel drive feature a propeller shaft. Standard front-wheel-drive models do not use this component.
Is it difficult to replace a CV joint myself on a Bora?
It requires appropriate tools and mechanical experience, but it is well within the capability of a confident DIY mechanic. The most crucial steps are thorough cleaning and ensuring the correct quantity of supplied grease is applied.
What happens if I drive with a split CV boot?
If the boot is torn, grease leaks out and road dirt penetrates the joint. This rapidly accelerates wear inside the CV joint, leading to noises and eventual mechanical failure. Replacing the CV boot promptly saves you the cost of a complete joint replacement.
How many drive shafts for Volkswagen Bora do you stock?
We currently offer 55 different drive shafts for the Volkswagen Bora to cover all engine variants and driveline setups.