Volkswagen Bora 2.0
Car parts and drivetrain components for Volkswagen Bora 2.0. Always check the fit before ordering.
Products for Volkswagen Bora 2.0
- Position: Front right
- Total length: 815 mm
- Splines wheel side: 36
- Position: Inner
- Seal diameter: 100 mm
- Inner splines: 33
- Joint diameter: 100 mm
- Position: Front left
- Flange diameter: 108 mm
- Total length: 545 mm
- Splines wheel side: 36
- Position: Outer
- Seal diameter: 53 mm
- Inner splines: 30
- Outer splines: 36
- Joint diameter: 81 mm
- Position: Front left
- Flange diameter: 100 mm
- Total length: 556 mm
- Splines wheel side: 36
- Position: Front right
- Flange diameter: 100 mm
- Total length: 822 mm
- Splines wheel side: 36
- Position: Front left
- Flange diameter: 94 mm
- Total length: 556 mm
- Splines wheel side: 36
- Position: Front right
- Diameter: 78 mm
- Flange diameter: 94 mm
- Total length: 822 mm
- Splines wheel side: 36
- Position: Front right
- Flange diameter: 108 mm
- Total length: 655 mm
- Splines wheel side: 36
- Position: Rear left
- Diameter: 81 mm
- Total length: 650 mm
- Splines wheel side: 36
- Position: Rear right
- Diameter: 81 mm
- Total length: 523 mm
- Splines wheel side: 36
- Position: Front right
- Flange diameter: 108 mm
- Total length: 809 mm
- Splines wheel side: 36
- Position: Inner
- Seal diameter: 94 mm
- Inner splines: 33
- Number of joints: 3
- ABS teeth: 0
- Position: Outer
- Inner splines: 30
- Outer diameter: 90 mm
- Splines wheel side: 36
- Position: Outer
- Inner splines: 30
- Outer diameter: 81 mm
- Splines wheel side: 36
Frequently asked questions about drivetrain parts for Volkswagen Bora 2.0
How do I know if my Volkswagen Bora 2.0 needs a new drive shaft?
The most common signs are heavy vibrations under acceleration or a persistent clicking noise when cornering. If you notice a split CV boot and grease has leaked out, there is a high risk that the shaft or joint needs replacing.
Do all CV joints fit all Volkswagen Bora models?
No, CV joints often differ depending on engine size and gearbox type. For the Volkswagen Bora 2.0, it is vital to check spline counts and dimensions, which is easiest done by selecting your vehicle's make, model and engine.
What is the difference between an inner and an outer CV joint on my Bora?
The outer CV joint sits at the wheel and accommodates steering angles, whilst the inner joint sits at the gearbox and handles changes in drive shaft length as the suspension moves. The symptoms of wear also differ between the two.
Why is the ABS warning light on in my Volkswagen Bora 2.0?
A common fault on the Bora 2.0 is a cracked or heavily corroded ABS ring on the drive shaft. This interrupts the signal to the sensor and illuminates the warning light. We stock replacement ABS rings to resolve this issue.
Can I replace just the CV joint, or do I need to replace the complete drive shaft?
You can often replace just the CV joint if the shaft itself is undamaged. However, if multiple components are worn or workshop labour costs are high, fitting a complete driveshaft can be more cost-effective.
Do you offer a guaranteed fit for Volkswagen Bora 2.0 parts?
Yes, we offer a fitment guarantee when you choose your vehicle's make, model and engine. This provides complete peace of mind that the parts you order are designed to fit your specific car.