Volkswagen Touran 1.4 FSI

Spare parts and drivetrain components for Volkswagen Touran 1.4 FSI. Check fitment by make, model and engine before ordering.

Products for Volkswagen Touran 1.4 FSI

17 products
1 - 17 of 17
Item no.:0446028
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 108 mm
Item no.:0519858
  • Position: Outer
  • Inner splines: 27
  • Seal diameter: 59 mm
  • Outer splines: 36
  • Thread size: M16X1,5
Item no.:1130277
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 525 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:2151874
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 795 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:1123001
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 495 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:341463
  • Position: Front right, Inner
  • Inner splines: 28
  • Seal diameter: 50 mm
  • Total length: 300 mm
  • Joint diameter: 102 mm
Item no.:1137404
  • Splines wheel side: 36
  • Total length: 523 mm
Item no.:2173343
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 785 mm
  • Joint diameter, gearbox side: 108 mm
  • Flange diameter: 108 mm
Item no.:1160080
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 528 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:2141369
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 764 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:346755
  • Position: Front, Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 107 mm
Item no.:0469233
  • Position: Inner
  • Inner splines: 28
  • Total length: 32 mm
Item no.:0681615
  • Total length: 102 mm
Item no.:0603613
  • Total length: 118 mm
Item no.:0903292
  • Inner diameter: 38 mm
  • Outer diameter: 63 mm

Drivetrain for Volkswagen Touran 1.4 FSI

The Volkswagen Touran 1.4 FSI is a versatile family car that places specific demands on its drivetrain to deliver the comfort and reliability you expect. The drivetrain is the critical link transmitting engine power to the wheels, and for a model such as the Touran, which is often used for both city driving and long family journeys, the condition of these components is vital. At CVJoint24, we specialise in precisely these parts so that you can maintain your car's driving dynamics without compromise. With an extensive range for the 1.4 FSI variant, we cover all common repair and maintenance needs.

Selecting the right parts for a Volkswagen Touran requires expertise, as minor differences across engine options and model years can result in variations in shaft lengths and spline counts. Our focus is on offering parts that not only fit physically, but also match original equipment specifications for torque and tensile strength. By investing in the right drivetrain components, you prevent secondary damage to the gearbox and suspension, saving both time and money in the long run. We understand how important it is to get your car back on the road quickly with parts you can rely on.

How the drivetrain is configured on the Volkswagen Touran 1.4 FSI

The drivetrain on a Volkswagen Touran 1.4 FSI is built around a front-wheel-drive layout with a transversely mounted engine. Power runs from the engine through the gearbox and is then distributed to the front wheels via two drive shafts. Each drive shaft is equipped with two joints: an inner CV joint mounted against the gearbox and an outer CV joint situated at the wheel hub. This design enables the front wheels to handle vertical suspension movement and steer horizontally while maintaining a constant flow of power. It is a proven and efficient layout, but it also means the components are subjected to significant mechanical stress on every journey.

The inner joints on the Touran 1.4 FSI are often tripod joints, engineered to accommodate the axial plunge that occurs as the wheels move up and down. The outer joints are typically Rzeppa-type constant velocity joints, allowing the wide articulation angles required at full steering lock. Between these joints runs the drive shaft bar itself, which must be precisely balanced to prevent vibration. The entire assembly is protected by CV boots filled with specialised grease, which are absolutely crucial for keeping dirt out and lubrication in. A properly functioning drivetrain is quiet, free from vibrations and efficient at transferring power.

Common faults and symptoms

There are several clear signs that the drivetrain on your Volkswagen Touran 1.4 FSI is wearing out. One of the most classic symptoms is a clicking or knocking noise from the front end when cornering sharply, especially under acceleration. This typically indicates that an outer CV joint is worn and needs replacing. If you instead experience vibrations throughout the car during acceleration, particularly at higher speeds, it may indicate that an inner CV joint has developed play or that a driveshaft has become unbalanced. These vibrations are often felt through the floorpan or the seat rather than the steering wheel.

Another critical symptom is grease leaking over the inside of the wheel rim or around the suspension components. This is almost always caused by a damaged CV boot. If a boot splits, road salt, water and grit penetrate the joint while the vital grease is thrown out. If this is not addressed immediately, the joint will fail in very short order. We therefore recommend inspecting the condition of the boots regularly. Catching a split boot early can often save an otherwise healthy CV joint, which is a far more economical repair than replacing the complete unit.

Common parts to replace on the Volkswagen Touran 1.4 FSI

For the Volkswagen Touran 1.4 FSI, we see consistent demand across specific drivetrain components. Our stock includes several complete drive shaft assemblies, which are the most straightforward solution for extensive wear as you replace both the shaft and both joints in one go. Where only an individual component has deteriorated, we stock various options for the outer CV joint on the Volkswagen Touran 1.4 FSI as well as several variants of the inner CV joint on the Volkswagen Touran 1.4 FSI. Having access to both complete shafts and separate joints gives you flexibility depending on the nature of the fault and your budget.

Beyond the joints and shafts themselves, it is important not to overlook the fitting accessories. When replacing a CV joint, you should always install new circlips, bolts and, of course, a new CV joint boot with fresh grease. Many of our products are supplied as complete kits to make installation straightforward. Because the Touran 1.4 FSI often covers high mileage, it is common for the drive shafts on both sides to wear at a similar rate. If you find a defect on one side, it is wise to inspect the other side as well to avoid having to visit the garage twice within a short period.

How to find the right part for your Volkswagen Touran 1.4 FSI

Proceed to the relevant section for your Volkswagen Touran 1.4 FSI:

On a vehicle with several possible drivetrain faults, it pays to start in the right category straight away. By comparing the exact component sections for the Volkswagen Touran 1.4 FSI, it becomes much easier to distinguish between issues with the drive shaft, CV joint or propeller shaft and continue to the page that best matches your symptoms and fitment needs.

Identifying the exact component that fits your Volkswagen Touran 1.4 FSI can sometimes feel tricky due to technical revisions over the model's production run. The most reliable way to navigate our range is to filter by your car's exact make, model and engine variant. This narrows our catalogue down to components that are technically verified for your specific car. This is especially important for drive shafts, where overall length and spline teeth counts can differ even within the same engine family. We have made it simple to jump directly to the right subcategory to streamline your purchase.

Here are the key categories for your vehicle:

  • Drive shafts for Volkswagen Touran 1.4 FSI – Complete assemblies for quick replacement.
  • Outer CV joints for Volkswagen Touran 1.4 FSI – Ideal if you are experiencing clicking noises when turning.
  • Inner CV joints for Volkswagen Touran 1.4 FSI – For resolving vibrations under acceleration.
Following these links takes you straight to our dedicated range, where every product features detailed technical specifications. If you are still unsure, our expert team is on hand to guide you so that you can complete your order with complete confidence.

Why buy from CVJoint24?

CVJoint24 is not just another car parts shop; we are the international store of a Swedish driveline specialist, with our central warehouse in Helsingborg, Sweden, dedicated entirely to drivelines and power transmission. Our technical focus means we understand the specific nuances of the Volkswagen Touran 1.4 FSI far better than general motor factors. We know correct fitment is everything, which is why we provide a reliable fitment guarantee on all our products. When ordering from us, you can be sure that the part delivered is exactly what your car requires to run smoothly again.

We combine our niche technical knowledge with efficient logistics across the European Union. We aim to keep your vehicle's downtime to a minimum, which is invaluable when daily family life depends on a working Touran. Our priority is to help you select the right part first time and have it delivered promptly to your door. By choosing a dedicated specialist like CVJoint24, you gain access to high-quality car parts at competitive prices, backed by customer support from people who truly know the components they sell. Your vehicle's drivetrain deserves the specialist care and quality we deliver every day.

Frequently Asked Questions about Drivetrain for Volkswagen Touran 1.4 FSI

Which drivetrain parts are most commonly replaced on a Touran 1.4 FSI?

The most commonly replaced parts are outer CV joints and complete drive shafts. Due to the vehicle's weight and front-wheel drive, these components endure heavy wear, particularly during city driving with frequent turning.

How do I know whether it is the inner or outer CV joint that is faulty?

Outer CV joints typically produce a clicking noise when turning. Inner CV joints usually cause vibrations through the car's chassis under acceleration, whether driving straight or cornering.

Do all Volkswagen Touran drive shafts fit the 1.4 FSI model?

No, drive shafts vary depending on the engine variant and gearbox type. It is therefore crucial to select your exact model and engine specifications to ensure the correct length and spline count.

What is included when I purchase a CV joint from you?

Our CV joints are normally supplied as complete kits containing the joint itself, a vehicle-specific CV boot, high-quality grease, circlips and the necessary bolts for installation.

Can I replace just the CV boot if the joint still feels fine?

Yes, if you detect a split boot early and the joint has not begun to make noises or vibrate, replacing the CV boot and repacking it with fresh grease can extend the joint's service life.

How does your fitment guarantee work for the Touran 1.4 FSI?

When you select your exact make, model and engine details when ordering, we guarantee the part will fit your car. In the unlikely event that something is incorrect, we will promptly help you exchange it for the right item without any hassle.