Volkswagen Touran 1.8 TSI

Spare parts and drivetrain components for Volkswagen Touran 1.8 TSI. Check fitment by your car's make, model and engine before ordering.

Products for Volkswagen Touran 1.8 TSI

5 products
1 - 5 of 5
Item no.:0569357
  • Position: Outer
  • Seal diameter: 59 mm
  • Inner splines: 27
  • Outer splines: 36
  • Joint diameter: 97,95 mm
Item no.:348419
  • Position: Inner
  • Inner splines: 28
Item no.:118775
  • Position: Front left
  • Flange diameter: 108 mm
  • Total length: 525 mm
  • Splines wheel side: 36
Item no.:211998
  • Position: Front right
  • Flange diameter: 108 mm
  • Total length: 806 mm
  • Splines wheel side: 36
Item no.:0646942
  • Height: 85 mm
  • Inner diameter: 22 mm
  • Outer diameter: 80 mm

Drivetrain for Volkswagen Touran 1.8 TSI

The Volkswagen Touran 1.8 TSI is a versatile vehicle that places high demands on its driveline to handle both demanding city traffic and long family journeys under heavy loads. The drivetrain is central to transferring power from the turbocharged 1.8 TSI engine down to the tarmac efficiently. As Swedish specialists in drivetrain components, we understand the technical requirements of this specific model and how essential precise fitment is. Every component, from the sturdy drive shafts down to the smallest circlips, plays a vital role in the car's handling, safety and overall service life.

Choosing the correct spare parts not only extends your vehicle's lifespan, but also ensures fuel economy and ride comfort are maintained at the level Volkswagen originally intended. A properly functioning drivetrain minimises unwanted friction and parasitic power loss, which is particularly crucial for TSI engines where peak torque is delivered early in the rev range. We supply car parts that meet or exceed original equipment specifications, giving you complete peace of mind for every kilometre on the road.

How the drivetrain is engineered on the Volkswagen Touran 1.8 TSI

The layout of the drivetrain on a Volkswagen Touran 1.8 TSI follows Volkswagen's proven front-wheel-drive design with a transversely mounted engine. Power is generated by the responsive 1.8 TSI engine and delivered via the gearbox—either a manual or a DSG dual-clutch transmission—out to the drive shafts. Each drive shaft is fitted with two joints: an inner CV joint positioned nearest the gearbox and an outer CV joint located at the wheel hub. The outer unit is a constant velocity joint that is vital for transferring drive smoothly whilst the front wheel steers and travels vertically through its suspension stroke.

To protect these precision-engineered parts, flexible CV boots packed with high-grade specialist grease are fitted. This is essential to prevent dirt, road salt and water from entering the moving assemblies, which would otherwise lead to rapid wear. On a model such as the Volkswagen Touran, the system is designed to provide smooth power delivery without vibration, meaning every element in the driveline must remain in prime condition. The interaction between shaft, joint and wheel hub is finely calibrated to withstand the torque generated during both hard acceleration and engine braking.

Common faults and symptoms

There are several clear symptoms indicating that drivetrain components on your Volkswagen Touran 1.8 TSI are wearing out or have suffered damage. One of the most typical signs is a rhythmic clicking or knocking noise when cornering under acceleration, such as when negotiating a tight turn or navigating a roundabout. This almost always indicates that an outer CV joint is worn and needs replacing promptly before a total mechanical failure occurs.

Vibrations felt through the steering wheel or bodywork, especially under acceleration at motorway speeds, can instead point to worn inner joints or an imbalance in the drive shaft itself. It is also vital to inspect the CV boots regularly for damage. If a boot splits, lubricating grease escapes and grit enters, which can destroy the constant velocity joint in very little time. Ignoring these early warning signs often leads to far more expensive repairs and, in the worst cases, leaves you stranded at the roadside with a sheared driveshaft.

Common parts to replace on the Volkswagen Touran 1.8 TSI

On the Volkswagen Touran 1.8 TSI, the outer CV joint is one of the most frequently replaced driveline components. Due to the vehicle's unladen weight and the engine's low-end torque, these parts face substantial mechanical strain during pulling away and brisk acceleration. In addition to the joints themselves, complete CV boot kits and ABS rings frequently require attention during routine servicing. A damaged or cracked ABS reluctor ring can transmit erratic signals to the onboard safety systems, triggering ABS or stability control warning lights on the dashboard.

We recommend carrying out a thorough inspection of the complete drive shaft whenever an issue is diagnosed on an individual component. In many cases, it proves more cost-effective to replace worn parts proactively before they induce collateral wear on other driveline parts in the Volkswagen system. Using the correct specialist grease and heavy-duty retaining clamps when fitting a replacement boot is equally critical to ensure the repair withstands harsh European winters, varying temperatures and salted roads.

How to find the correct part for your Volkswagen Touran 1.8 TSI

Navigate directly to the relevant subcategory for the Volkswagen Touran 1.8 TSI:

When addressing driveline faults, starting in the precise subcategory makes diagnostics and sourcing straightforward. By browsing the specific part sections for the Volkswagen Touran 1.8 TSI, it is simple to distinguish between drive shaft, CV joint or propeller shaft issues and proceed to the page that matches your car's symptoms and technical specifications.

By using these tailored links and matching your car by its exact make, model and engine, you avoid ordering errors and unnecessary returns. If you need confirmation on a specific technical detail, our driveline experts are on hand to advise you, giving you full confidence that your new spare parts will fit your vehicle straight out of the box.

Why shop at CVJoint24?

CVJoint24 is your dedicated driveline specialist, offering expertise that goes far beyond general automotive retailers. We combine in-depth technical knowledge with a wide inventory spanning standard parts to hard-to-find components for your Volkswagen Touran 1.8 TSI. Sourcing your parts from us means you benefit from our fitment guarantee and decades of driveline experience. We know that your time is valuable and that you rely on your vehicle daily, which is why we help you identify the right component on the first attempt.

As the international shop of a Swedish driveline specialist shipping from our central warehouse in Helsingborg, Sweden across the European Union, we are committed to dependable dispatch and top service. Our objective is to deliver the finest balance of quality, value and technical know-how. By focusing exclusively on drivetrain parts, we maintain a higher standard of technical expertise and a more comprehensive selection. At CVJoint24, you can rely on getting the right part for your car, making us the trusted choice for DIY mechanics and professional garages seeking dependable quality for their Volkswagen.

Frequently asked questions about drivetrain parts for Volkswagen Touran 1.8 TSI

How do I know if the outer CV joint on my Touran 1.8 TSI is worn out?

The most common sign is a clicking or knocking noise on full steering lock during acceleration. If the sound disappears when driving straight ahead, it is a typical symptom of wear in the outer joint.

Can I replace just the CV boot if I catch a split in time?

Yes, if you catch the split early before the grease has leaked out or dirt has got in, replacing the CV boot and packing it with fresh grease can often save the CV joint.

Do all Volkswagen Touran CV joints fit the 1.8 TSI model?

No, CV joints often vary depending on engine output, gearbox type and model year. It is therefore essential to check the exact fit by selecting your vehicle's make, model and engine.

What is typically included in your CV joint kits?

Our kits are complete and usually include the CV joint itself, a vehicle-specific CV boot, high-quality grease, circlips, clamps and, where required, a new centre bolt or axle nut.

Why does the car vibrate under acceleration?

Vibration during acceleration is often caused by wear in the inner CV joints or an unbalanced drive shaft. It can also stem from a damaged driveshaft that is no longer running true.

How quickly will my parts arrive?

We offer fast delivery across the EU from our Swedish central warehouse, meaning in-stock parts for your Volkswagen Touran are dispatched promptly so you receive them without delay.