Volkswagen Touran 2.0 FSI
Car parts and drivetrain components for Volkswagen Touran 2.0 FSI. Always check the fit before ordering.
Products for Volkswagen Touran 2.0 FSI
- Position: Inner
- Seal diameter: 100 mm
- Inner splines: 33
- Joint diameter: 100 mm
- Position: Outer
- Seal diameter: 60 mm
- Inner splines: 30
- Outer splines: 36
- Joint diameter: 89,9 mm
- Position: Front left
- Flange diameter: 100 mm
- Total length: 520 mm
- Splines wheel side: 36
- Position: Front left
- Total length: 586 mm
- Splines gearbox side: 26
- Splines wheel side: 36
- Position: Front right
- Flange diameter: 100 mm
- Total length: 814 mm
- Splines wheel side: 36
- Position: Front right
- Total length: 883 mm
- Splines gearbox side: 26
- Splines wheel side: 36
- Position: Inner
- Seal diameter: 94 mm
- Inner splines: 33
- Number of joints: 3
- ABS teeth: 0
- Position: Front left
- Flange diameter: 100 mm
- Total length: 517 mm
- Splines wheel side: 36
Frequently asked questions about Drivetrain for Volkswagen Touran 2.0 FSI
How do I know whether to replace the complete drive shaft or just a CV joint on my Touran 2.0 FSI?
If you experience severe vibrations or if there is visible damage to the shaft bar itself, we recommend replacing the complete drive shaft. If the issue is simply a clicking noise when turning, replacing just the outer CV joint is often sufficient.
Does the same drive shaft fit both manual and automatic Volkswagen Touran 2.0 FSI models?
No, drive shafts usually differ in length and mounting interface depending on the gearbox type. Always select your vehicle by make, model and engine variant to ensure you receive the correct version for your car.
What are the most common symptoms of a worn inner CV joint?
The most common signs are vibrations felt through the floor or seats during acceleration, which typically disappear as soon as you ease off the throttle.
Are the CV boot and grease included when I buy a CV joint from you?
Yes, our CV joint kits come complete with a CV boot, high-quality grease, clamps and mounting hardware to ensure a straightforward and proper installation.
How often should I inspect the drivetrain on my Volkswagen Touran?
We recommend a visual inspection of the CV boots and joints at every routine service or oil change to catch any cracks or splits before they lead to costly damage.
What does your fitment guarantee mean for my Touran 2.0 FSI?
It means that when you choose your exact car model and specifications and we confirm the part, we guarantee that it fits your vehicle technically. If not, we will help you exchange it for the correct part without any fuss.