Volvo S70 2.4 Turbo

Volvo S70 2.4 Turbo drivetrain parts

The Volvo S70 2.4 Turbo combines classic Scandinavian design with a potent turbocharged engine. Delivering this power to the road effectively and safely requires a drivetrain in peak condition. The drivetrain is the sequence of components that transfers engine torque to the road wheels, and on a performance model like the 2.4 Turbo, these parts are subjected to substantial loads under hard acceleration. As specialists in drivetrain components, we ensure you have access to parts that match original-equipment specifications and durability.

Maintaining the drivetrain on your Volvo S70 is not merely about preserving performance; it is also crucial for long-term safety and running costs. Worn components can cause secondary damage to the gearbox and front suspension if left unattended. Our range is tailored to cover the most critical requirements for this specific engine variant, including everything from complete drive shafts to dedicated CV joint repair kits. Choosing the correct parts ensures your car retains its composed road manners and dependable reliability for many kilometres to come.

How the Volvo S70 2.4 Turbo drivetrain is configured

The drivetrain on the Volvo S70 2.4 Turbo is engineered for front-wheel drive with a transverse engine layout. The assembly relies primarily on two drive shafts connecting the gearbox to the front wheel hubs. Because the right-hand drive shaft is considerably longer than the left, it often incorporates an intermediate centre bearing mounted on the engine block to suppress vibrations and reduce torque steer—a common issue on high-torque turbocharged models. Each driveshaft features two flexible joints: an inner CV joint at the gearbox end to accommodate axial movement as the suspension articulates, and an outer CV joint at the hub allowing for steering angle alongside suspension travel.

A vital yet frequently neglected part of this assembly is the protective CV boot surrounding each joint. These flexible boots retain the specialist grease and prevent road grit and water from penetrating the precision-ground raceways. An ABS ring is also fitted to each outer CV joint, providing the wheel-speed signal required by the anti-lock braking and traction control systems. While this setup is engineered to cope with the torque of the 2.4 Turbo engine, periodic inspections are essential to catch split rubber boots and mechanical play early.

Common faults and symptoms

Several distinct symptoms indicate drivetrain wear on a Volvo S70 2.4 Turbo. The most classic sign of a worn outer CV joint is a rhythmic clicking or knocking sound on full steering lock, such as when manoeuvring into a parking space or pulling out of a tight junction. If the sound subsides when the steering wheel is straightened, it almost certainly points to worn balls and grooved tracks inside the outer constant velocity joint, typically triggered by a split boot allowing grease to escape and dirt to enter.

Vibrations are another frequent issue, though their source can be trickier to pinpoint. If severe shuddering occurs specifically under acceleration and disappears as soon as you lift off the throttle, the fault typically lies within the inner CV joints or an out-of-balance drive shaft. Excess play inside the inner joint causes an uneven delivery of torque that reverberates through the entire car. Finally, ABS warning lights or an unprompted pulsing pedal during gentle braking usually point to a cracked or heavily corroded ABS ring. Exposed to road salt and moisture, damaged reluctor rings are a well-known issue on older Volvo saloons.

Common replacement parts for the Volvo S70 2.4 Turbo

When repairs are due, we supply the exact parts required for your Volvo S70 2.4 Turbo. Our range includes multiple drive shaft options, which is essential because specifications vary between manual and automatic gearboxes, as well as production model years. Replacing the complete shaft assembly is often the most cost-effective fix for widespread wear: you receive both inner and outer joints alongside factory-fitted CV boots in a single unit, eliminating the risk of repeat failures.

If only the wheel-end joint is damaged, we provide four types of outer CV joints. These arrive as comprehensive kits complete with a new CV boot, grease and retaining hardware. We also supply replacement ABS rings matched to the S70 sensor setup. Here is an overview of the most common categories for this model:

• Drive shafts (left- and right-hand side)
• Outer CV joint kits with boot, clips and grease
• ABS reluctor rings for outer CV joints
• Inner and outer CV boots

Selecting the relevant category enables you to find the correct component for your repair without delay.

Finding the right parts for your Volvo S70 2.4 Turbo

Navigate directly to the appropriate section for the Volvo S70 2.4 Turbo:

When diagnosing drivetrain problems, starting in the right product category saves time. Comparing the specific sections for the Volvo S70 2.4 Turbo helps you differentiate between drive shaft, CV joint, or prop shaft issues and quickly access the parts that match your vehicle's symptoms and fitment.

• Drive shafts for Volvo S70 2.4 Turbo
• Outer CV joints for Volvo S70 2.4 Turbo
• ABS rings for Volvo S70 2.4 Turbo

Identifying the precise replacement part for a Volvo S70 2.4 Turbo requires attention to detail. Although the exterior styling remains consistent across the range, running engineering changes occurred beneath the bonnet. Start by selecting your car's exact make, model and engine variant in our store selector to filter down to the relevant items. Because Volvo changed component suppliers and driveline revisions across production years, we always recommend verifying key physical specifications before ordering.

The most critical dimensions to check are the spline counts—the machined teeth on the ends of the shaft or inside the CV joints. Note both the outer spline count (mating with the wheel hub) and the inner spline count (where the shaft secures into the joint or gearbox). Additionally, confirm the diameter of the oil seal collar and verify the presence or tooth profile of the ABS ring. Matching your vehicle details with these simple measurements ensures you get the right fit first time.

Why buy from CVJoint24?

CVJoint24 is not just an ordinary car parts retailer; we are the international shop of a Swedish driveline specialist, sending precision components from our central warehouse in Helsingborg across the EU. For Volvo S70 2.4 Turbo owners, this means direct access to deep technical knowledge and premium replacement parts. We understand the specific engineering characteristics of Volvo platforms and curate our catalogue to withstand harsh driving conditions, backed by our fitment guarantee so you can order with absolute confidence.

We know that a failed drive shaft or noisy CV joint can leave your car off the road. That is why we maintain high stock levels and dispatch orders swiftly to get your parts to your garage without unnecessary delays. Our goal is to supply the right part at the right price, supported by knowledgeable customer support. Sourcing from a dedicated specialist means you receive durable, precision-engineered driveline components built specifically for your Volvo.