ABS rings for Audi 80 Avant 2.3 E
This category focuses on ABS rings for the Audi 80 Avant 2.3 E. To assist owners of this front-wheel-drive estate, we have filtered components tailored to this specific drivetrain,...
Products for ABS rings for Audi 80 Avant 2.3 E
- Position: Front
- ABS teeth: 45
- Inner diameter: 64 mm
- Outer diameter: 74 mm
- Width: 8,1 mm
ABS rings for Audi 80 Avant 2.3 E
The Audi 80 Avant 2.3 E is an iconic model that demands precision when it comes to spare parts. The ABS ring, also known as an ABS reluctor ring, is a small yet critical component in your car's safety system. For this specific model, equipped with the distinctive five-cylinder engine, it is vital that the drivetrain and braking system interact seamlessly. A defective ring can lead to compromised braking performance, making it essential to choose a high-quality replacement part. At CVJoint24, you will find components tailored specifically for the Audi 80 Avant 2.3 E, ensuring your classic continues to cover many kilometres safely. We focus on delivering parts that meet or exceed original equipment standards to satisfy the demands of a vehicle of this calibre.
What does the ABS ring do on an Audi 80 Avant 2.3 E?
The ABS ring on your Audi 80 Avant 2.3 E acts as a tone wheel for the anti-lock braking system. It is mounted on the CV joint and rotates in unison with the wheel. A sensor reads the teeth on the ring, sending real-time wheel speed data to the car's engine control unit. If a wheel is about to lock up under heavy braking, the system detects this via the ABS ring and regulates braking pressure instantly. Without a functioning ring, the car loses its ability to prevent wheel lock-up, drastically impairing steering control during sharp deceleration. It is a vital part of your Audi's technical safety architecture, directly affecting how effectively your safety systems can intervene in an emergency.
Common signs of wear
The most common symptom of a cracked or damaged ABS ring on an Audi 80 Avant is the illumination of the ABS warning light on the dashboard. You may also experience premature ABS activation, feeling a pulsating sensation through the brake pedal during gentle braking at low speeds on dry tarmac. This is typically caused by the ring cracking due to corrosion forming on the CV joint underneath. When the ring cracks, the spacing between the teeth changes, sending erratic signals to the sensor. If you notice these symptoms, it is time to inspect your rings to avoid losing safety features when you need them most. Ignoring these signs can lead to longer stopping distances and reduced stability.
How to choose the correct ABS ring
Selecting the right ABS ring for your Audi 80 Avant 2.3 E requires paying attention to key technical specifications. These primarily include the number of teeth, the inner diameter, and the ring's overall width. Because Audi fitted different variants depending on the model year and equipment specification, the most reliable method is to select your vehicle by make, model, and engine variant in our catalogue. This ensures you find the exact fit for your specific drivetrain, saving time during installation and eliminating the risk of ordering incorrect car parts. Remember that correct dimensions are essential for the sensor to read the pulse accurately; an incorrect tooth count will trigger fault codes and disable the ABS system.
Related parts to inspect
Be sure to check these related pages for the same vehicle when working on an ABS ring:
When one drivetrain component shows signs of wear, nearby parts on the same car often require attention too. By comparing these dedicated pages for the Audi 80 Avant 2.3 E, you can easily determine whether an issue lies with the ABS ring itself or an adjacent section of the drivetrain.
This is especially important on models where vibrations, play, and strange noises can travel between interconnected drivetrain parts. Checking related categories reduces the risk of replacing one correct part while overlooking an adjacent component that contributes to the same problem.
Why buy from CVJoint24?
CVJoint24 is your dedicated partner for vehicle drivetrain parts. As the international shop of a Swedish driveline specialist, we focus on offering parts manufactured to the highest standards of precision and durability. We understand how important it is to receive the correct part the first time, which is why we provide an accurate fitment guarantee on our products. With our comprehensive range and deep technical expertise, we help you keep your Audi in prime condition. Furthermore, we ship promptly across the EU to minimise your car's downtime in the garage. When you buy from us, you can trust you are getting parts that meet or exceed OEM quality at competitive prices.
Frequently asked questions about ABS rings for Audi 80 Avant 2.3 E
How do I know if the ABS ring on my Audi 80 Avant 2.3 E is damaged?
The most common symptoms are an illuminated ABS warning light or brake pedal pulsation when braking at low speeds on dry tarmac. A visual inspection will often reveal cracks in the ring.
Can I replace just the ABS ring, or do I need to replace the entire CV joint?
On the Audi 80 Avant 2.3 E, it is usually perfectly fine to replace only the ABS ring, provided that the CV joint itself is in good condition with no play or unusual noises.
Why do ABS rings fail on older Audi models?
The primary cause is corrosion. Rust builds up on the CV joint beneath the ring, exerting outward pressure until the hardened steel ring eventually cracks.
How many teeth should an ABS ring have for the Audi 80 Avant 2.3 E?
The tooth count can vary depending on the exact vehicle specification. It is therefore essential to select your car's correct make, model and engine variant in our search tool to ensure the right part.
Do I need specialist tools to fit a new ABS reluctor ring?
No complex specialist tools are needed, but it is crucial to clean all rust from the seating surface on the CV joint thoroughly before the new ring is pressed or heat-fitted into place.
Do you offer a guaranteed fit on ABS rings?
Yes, we always provide a fitment guarantee when you select your car by make, model and engine, ensuring you receive a part that fits your Audi 80 Avant 2.3 E perfectly.