ABS rings for Honda Civic

Find the right ABS ring for your Honda Civic, whether you drive a saloon or coupé. This range covers sensor rings engineered for Civic models produced between 1991 and 2005. Select your...

Products for ABS rings for Honda Civic

6 products
1 - 6 of 6
Item no.:0365887
  • Position: Front
  • ABS teeth: 50
  • Inner diameter: 84 mm
  • Outer diameter: 91 mm
  • Width: 9 mm
Item no.:338765
  • ABS teeth: 50
  • Inner diameter: 84 mm
  • Outer diameter: 91 mm
  • Width: 9 mm
Item no.:332561
  • ABS teeth: 50
  • Inner diameter: 88 mm
  • Outer diameter: 98 mm
  • Width: 9 mm
Item no.:0365988
  • Position: Front
  • ABS teeth: 50
  • Inner diameter: 82 mm
  • Outer diameter: 91 mm
  • Width: 9 mm
Item no.:337849
  • Position: Front
  • ABS teeth: 50
  • Inner diameter: 79 mm
  • Outer diameter: 91 mm
  • Width: 9 mm
Item no.:332293
  • ABS teeth: 50
  • Inner diameter: 84 mm
  • Outer diameter: 91 mm
  • Width: 9 mm

ABS rings for Honda Civic

The Honda Civic is renowned for its reliability, but like any car, its drivetrain is subjected to significant stress over the years. The ABS ring, also known as an ABS reluctor ring, is a vital component for the vehicle's safety systems and stability. At CVJoint24, you will find a wide range of ABS rings specifically engineered for various Civic generations. Our category range covers most requirements, whether for an older workhorse or a newer model. Selecting the correct part is essential to prevent fault codes and ensure the car's braking system communicates accurately with the wheel speed sensors.

What does an ABS ring do on a Honda Civic?

The ABS ring on your Honda Civic is mounted on the CV joint and is responsible for delivering a precise speed signal to the car's ABS control unit. As the wheel rotates, the teeth of the ring pass a magnetic sensor, generating electrical pulses. The control unit interprets these pulses to detect whether a wheel is about to lock up under braking. If the ring is damaged or dirty, the signal becomes erratic, potentially causing the system to enter failsafe mode. It is a compact yet technically sophisticated component that plays a key role in the vehicle's active safety and stability control, making its condition critically important.

Common signs of wear

The most frequent sign that an ABS ring on your Honda Civic needs replacing is an illuminated ABS warning light on the dashboard. You may also notice the ABS kicking in unnecessarily during gentle braking at low speeds, felt as a pulsating sensation through the brake pedal. Because the rings are often made of steel and exposed to the elements, corrosion is the primary cause of failure. Rust can cause the ring to swell and eventually crack, altering the gap between the teeth and causing the sensor to lose count. A visual inspection often reveals cracks or missing teeth that disrupt the signal.

How to choose the correct ABS ring

To choose the correct ABS ring for your Honda Civic, it is important to verify the tooth count and the inner diameter of the ring. Honda has used different specifications depending on the engine variant and model year. The most reliable way to find the right part is to select your vehicle's make, model and engine in our store. This filters the catalogue so you only see parts engineered for your exact car. If you are unsure, you can also measure the old ring or count the teeth on your existing outer CV joint, where the ring is typically mounted, to guarantee complete compatibility before fitting.

Related parts to check

Please also check these exact pages for the same vehicle when working on an ABS ring:

When one drivetrain component shows signs of wear, nearby parts on the same car often require inspection as well. Comparing these exact pages for Honda Civic makes it easier to determine whether the issue lies specifically with the ABS ring or another connected drivetrain part.

This is especially important on models where vibration, play and noises can transfer symptoms across several driveline components. A quick check of related categories reduces the risk of replacing the right type of part while overlooking an adjacent component that contributes to the same issue.

Checking CV boots and joints alongside an ABS repair saves time and money over the long term, preventing consequential damage caused by dirt entering the constant velocity joint.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist with its warehouse in Helsingborg, Sweden. We understand the technical demands of vehicle drivetrains and focus on providing parts with an exact fit. Our dedicated expertise allows us to provide a deeper catalogue than general car parts retailers. When you shop with us, you receive premium-quality components engineered to withstand harsh European roads and winters, where road salt and moisture place severe demands on ABS ring materials. By selecting your make, model and engine, you can be confident of getting the right part for your Honda Civic every time, backed by rapid dispatch and technical precision.

Frequently asked questions about ABS rings for Honda Civic

How do I know if my Honda Civic needs a new ABS ring?

The most common symptoms are an illuminated ABS warning light or the ABS triggering during gentle braking on dry surfaces. A visual inspection will often show if the ring is cracked or heavily corroded.

Can I replace just the ABS ring or do I have to replace the whole CV joint?

On most Honda Civic models, you can easily replace just the ABS ring if the CV joint itself is otherwise in good condition. This is a cost-effective solution.

Why do ABS rings fail on the Honda Civic?

The main cause is corrosion. Rust develops underneath the ring, creating pressure that eventually causes the ring to crack. This is especially common in harsh European winters with road salt.

Will a cracked ABS ring affect the MOT test?

Yes, if the ABS warning light is on or the system does not function correctly, the car will fail its roadworthiness inspection (such as the MOT test) as it is considered a safety defect.

How do I find the correct tooth count for my ABS ring?

The easiest way is to filter by your car's make, model and engine variant in our shop. You can also count the teeth on the old ring before ordering to be completely sure.