ABS rings for Nissan Primera

Find the right ABS ring for your Nissan Primera from our extensive selection of reluctor rings for front-wheel-drive models. Whether you drive an early 1990s petrol version or a later...

Products for ABS rings for Nissan Primera

8 products
1 - 8 of 8
Item no.:0309672
  • ABS teeth: 44
  • Inner diameter: 77 mm
  • Outer diameter: 87 mm
  • Width: 9,5 mm
Item no.:133921
  • Position: Front
  • ABS teeth: 44
  • Inner diameter: 77 mm
  • Outer diameter: 87 mm
  • Width: 9,5 mm
Item no.:0371973
  • ABS teeth: 42
  • Inner diameter: 77 mm
  • Outer diameter: 87 mm
  • Width: 8,2 mm
Item no.:333394
  • Position: Front
  • ABS teeth: 42
  • Inner diameter: 77 mm
  • Outer diameter: 87 mm
  • Width: 8 mm
Item no.:0304234
  • ABS teeth: 42
  • Inner diameter: 77 mm
  • Outer diameter: 87 mm
  • Width: 8 mm
Item no.:134623
  • Position: Front
  • ABS teeth: 44
  • Inner diameter: 77 mm
  • Outer diameter: 87 mm
  • Width: 9,5 mm
Item no.:334081
  • Position: Front
  • ABS teeth: 42
  • Inner diameter: 77 mm
  • Outer diameter: 87 mm
  • Width: 8 mm
Item no.:132667
  • Position: Front
  • ABS teeth: 44
  • Inner diameter: 77 mm
  • Outer diameter: 87 mm
  • Width: 9,5 mm

ABS rings for Nissan Primera

Maintaining the braking system on your Nissan Primera is essential for both safety and driving dynamics. One of the most critical, yet frequently overlooked, components is the ABS ring, also known as an ABS reluctor ring. On the Nissan Primera, it is common for these rings to suffer heavy wear from road salt and moisture, which can cause them to crack or lose their magnetic signal. At CVJoint24, we are Swedish driveline specialists offering a wide range of ABS rings specifically tailored to your model. Choosing the correct replacement part ensures your car's anti-lock braking system can read wheel speeds accurately, which is vital for the system to intervene during an emergency stop.

What does an ABS ring do on a Nissan Primera?

The ABS ring on a Nissan Primera serves as a precision component within the car's electronic safety system. Fitted directly to the CV joint, it rotates in sync with the wheel. An ABS sensor sits directly over the ring's teeth or magnetic track, transmitting an electrical signal to the car's ABS control unit. This signal informs the computer of the exact speed of each wheel. If the control unit detects that a wheel is about to lock under braking, it instantly modulates brake pressure. Without a functioning ABS ring, the system loses its ability to manage braking force per wheel, drastically compromising stability and steering control under heavy braking on slippery road surfaces.

Common signs of wear

Several clear symptoms indicate that an ABS ring on your Nissan Primera is failing. The most common sign is the ABS warning light illuminating on the dashboard, often alongside the traction control system being disabled. Another distinct symptom is a pulsating or shuddering brake pedal during routine braking at low speeds, just before the car comes to a complete halt. This occurs because a cracked ring generates an erratic signal, tricking the control unit into sensing wheel lock-up. If you experience these vibrations or see warning lights, it is time to inspect the rings visually for cracks, severe corrosion or missing teeth.

Choosing the right ABS ring

Selecting the correct ABS ring for your Nissan Primera requires precision, as specifications vary depending on engine variant and model year. The most crucial details to check are the tooth count, inner diameter and overall width. Fitting a ring with the incorrect number of teeth will send a false speed signal, preventing the ABS system from working properly. We strongly advise using our vehicle selection tool to filter by your car's make, model and engine variant to find technically compatible parts. Choosing your exact model ensures you minimise the risk of ordering the wrong part and receive a replacement that matches original specifications.

Related parts to inspect

Be sure to check these exact pages for your car when working on your ABS rings:

When one drivetrain component shows signs of wear, adjacent parts on the car often require attention as well. By cross-referencing these exact pages for the Nissan Primera, it becomes much easier to determine whether the issue lies with the ABS ring or another related part of the driveline.

This is particularly relevant on models where vibrations, play and unwanted noises can transfer symptoms across interconnected driveline components. Checking related categories reduces the risk of replacing one correct part while missing an adjacent component that contributes to the same fault.

Replacing related wear parts at the same time often saves considerable time and labour costs in the long run, as the suspension is already disassembled.

Why buy from CVJoint24?

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders directly from our central warehouse in Helsingborg, Sweden. We combine in-depth technical expertise with a product range manufactured to strict quality standards, making us the trusted choice for Nissan owners across Europe. We understand the importance of an exact fit, providing an intuitive model selector so you can quickly find the right parts for your Nissan Primera. With our focus on reliable delivery and components that meet or exceed OE quality, we help you keep your vehicle in peak condition. Our passion for drivelines ensures you receive durable parts engineered to withstand demanding European driving conditions.

Frequently asked questions about ABS rings for Nissan Primera

Why does the ABS ring fail on my Nissan Primera?

It is usually caused by corrosion. Rust forms beneath the ring on the CV joint, creating outward pressure that eventually causes the ring to crack.

Can I drive my Nissan Primera with a broken ABS ring?

It is not recommended. Braking performance is impaired, and safety systems such as ABS and electronic stability control will stop working, which also leads to an MOT failure.

Do I have to replace the entire CV joint if only the ABS ring is broken?

No, on most Nissan Primera models you can replace just the ABS ring, provided that the CV joint itself is otherwise in good condition.

How do I know how many teeth my ABS ring should have?

The most reliable method is to select your car's make, model and engine variant in our store, or to count the teeth on the old ring before ordering.

Are special tools required to fit a new ABS ring on a Primera?

No, but the mating surface must be thoroughly cleaned, and the new ring often needs to be heated gently so that it slides smoothly into place.