ABS rings for Volvo S60 2.5 T5

Searching for a high-quality ABS ring for your Volvo S60 2.5 T5? At CVJoint24, you will find the right components for your car's braking system and drivetrain. We are Swedish driveline...

Products for ABS rings for Volvo S60 2.5 T5

1 products
1 - 1 of 1
Item no.:633093
  • Position: Rear

ABS rings for Volvo S60 2.5 T5

Welcome to CVJoint24, your specialist in drivetrain components. If your Volvo S60 2.5 T5 is having problems with its anti-lock braking system, a cracked or corroded ABS ring is a very common cause. This specific model, with its powerful T5 engine and sporty handling, demands high-quality components to ensure that the active safety systems operate at their best under all driving conditions, from urban commuting to motorway cruising. A functioning ABS ring is essential for the anti-lock brakes to modulate brake pressure correctly and prevent skidding under hard braking.

We provide carefully selected car parts manufactured to match original equipment specifications, keeping your Volvo S60 2.5 T5 safe on the road. By selecting the right component straight away, you avoid failed roadworthiness tests and costly secondary faults within the braking system that can occur if the issue is left unaddressed. Our parts are thoroughly tested to withstand harsh European winters, where road salt frequently accelerates corrosion on precisely these exposed components.

What does an ABS ring do on a Volvo S60 2.5 T5?

The ABS ring on a Volvo S60 2.5 T5 is a vital element of the wheel speed sensor system. It is mounted on the drive shaft, usually directly on the outer CV joint, and rotates at the exact speed of the wheel. A magnetic sensor, or ABS sensor, is positioned directly above the teeth of the ring. As the wheel spins, the passing teeth induce an electrical pulse in the sensor. This signal is continuously sent to the electronic control unit, which monitors the frequency to calculate the precise rotational speed of the wheel.

The vehicle control module analyses these pulses continuously. If the computer detects that a wheel is on the verge of locking up under braking, it immediately reduces hydraulic brake pressure to that specific wheel. Without an intact ABS reluctor ring, the system loses the ability to read wheel speed accurately, disabling critical safety functions and causing unpredictable braking behaviour. On a performance car like the T5, this system is doubly important for maintaining control during spirited driving.

Common signs of wear

The most frequent sign that an ABS ring on your Volvo S60 2.5 T5 has failed is the ABS warning light illuminating on the dashboard. This typically happens because the ring has cracked due to corrosion swelling underneath it on the CV joint hub. The pressure from rust expands the ring until it snaps. Another telltale symptom is the ABS kicking in unnecessarily, causing a pulsating or juddering sensation through the brake pedal during gentle, low-speed stops on dry tarmac just before the car comes to a standstill.

This occurs because the sensor loses its signal over the crack in the ring, which the control unit misinterprets as a locked wheel. If you notice these pedal vibrations or if your warning light comes on, you should inspect the rings immediately. A broken ring can also disable the traction and stability control systems (STC/DSTC), making the car much harder to manage on slippery roads. Fixing the problem promptly prevents unnecessary wear on the ABS hydraulic pump and other costly components.

Choosing the correct ABS ring

To choose the correct ABS ring for your Volvo S60 2.5 T5, you need to pay close attention to the technical specifications. Variations exist depending on production year and chassis number, even within the same engine model. Crucially, you must verify the tooth count on the ring as well as its inner diameter. A ring with the wrong number of teeth will send inaccurate frequency signals to the control unit, preventing the ABS from working properly and triggering fault codes immediately upon driving away.

Before installing the replacement ring, it is essential to clean the seating surface on the outer joint thoroughly, removing all rust scale and road grime with a wire brush. If the surface is not completely clean and smooth, the new ring may crack during installation or sit unevenly, creating an inconsistent air gap and an erratic sensor signal. We always recommend using our vehicle selector by choosing your car's make, model and engine to find the exact parts suited to your vehicle. This eliminates the risk of ordering the wrong part and ensures a smooth, long-lasting repair.

Related components to inspect

Be sure to inspect these related categories for the same vehicle when working on the ABS ring:

When one drivetrain component shows signs of wear, adjacent parts on the same vehicle frequently warrant an inspection. By checking these exact pages for the Volvo S60 2.5 T5, you can more easily determine whether an issue lies strictly with the ABS ring or another related driveline part.

This is especially important on performance models where vibrations, play and unusual noises can travel across multiple components in the drivetrain. Reviewing related categories minimises the risk of replacing one correct part while overlooking an adjacent component that causes the same underlying symptoms.

Checking the entire assembly saves time and money down the line. A worn CV joint with excessive play or vibration can quickly damage a newly fitted ABS ring. Renewing related driveline parts while the suspension and hub assembly are already dismantled is often the most cost-effective way to secure dependable performance and driving comfort.

Why shop with CVJoint24?

When you choose CVJoint24, you are buying from a Swedish driveline specialist shipping high-grade parts across the European Union. We understand how critical it is to get the correct part for your Volvo S60 2.5 T5 the first time, which is why we provide a reliable fitment guarantee. Backed by extensive technical expertise and an inventory spanning everything from complete drive shafts to individual ABS reluctor rings, we ensure dependable quality across our entire range, dispatched directly from our central warehouse in Helsingborg, Sweden.

We dispatch our orders promptly to keep your car's time off the road to a minimum. By using our intuitive make, model and engine search, you can order with total confidence, knowing you will receive the correct part every time. We are dedicated specialists committed to keeping your car running safely and smoothly with durable spare parts built to last. With CVJoint24, you receive not just a car part, but the reassurance of true driveline expertise.

Frequently asked questions about ABS rings for Volvo S60 2.5 T5

How do I know if the ABS ring fits my Volvo S60 2.5 T5?

The most reliable way is to select your vehicle by make, model and engine in our shop. You should also check the number of teeth on your old ring where possible, as variations can occur.

Can I replace just the ABS ring, or must the entire CV joint be replaced?

On the Volvo S60 2.5 T5, you can easily replace just the ABS ring if the CV joint is otherwise in good condition. This is a very cost-effective solution.

Why do ABS rings crack on Volvo models?

This is usually caused by corrosion. Rust builds up underneath the ring on the CV joint, creating pressure from within that eventually forces the ring to crack.

Will a broken ABS ring cause an MOT failure?

Yes, if the ABS warning light is illuminated or the system signals a fault, the vehicle will fail its roadworthiness inspection (such as the MOT) as this is a safety hazard.

What tools are needed to replace an ABS ring?

You will need standard socket sets to detach the drive shaft, a wire brush for thorough cleaning, and potentially a heat source to gently warm the new ring for easier fitting.

Is there a difference between front and rear ABS rings?

Yes, front and rear rings often have different dimensions and tooth counts. Always check the exact specifications for the axle position you are working on.