Audi 100 Avant 2.2

Welcome to your specialist for Audi 100 Avant 2.2 drivetrain parts. We provide an extensive range of high-quality components engineered to ensure your car's power delivery remains smooth...

Products for Audi 100 Avant 2.2

25 products
1 - 24 of 25
Item no.:0523719
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 56 mm
  • Outer splines: 26
  • ABS teeth: 46
Item no.:0359602
  • ABS teeth: 45
  • Inner diameter: 64 mm
  • Outer diameter: 74 mm
  • Width: 8,1 mm
Item no.:0535564
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 60 mm
  • Outer splines: 38
  • ABS teeth: 45
Item no.:210548
  • Position: Front right
  • Splines wheel side: 26
  • Total length: 640 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:210415
  • Position: Front right
  • Splines wheel side: 26
  • Total length: 640 mm
  • Diameter 1: 90 mm
  • ABS teeth: 45
Item no.:218743
  • Position: Front right
  • Splines wheel side: 26
  • Total length: 640 mm
  • Diameter 1: 90 mm
  • ABS teeth: 96
Item no.:112857
  • Position: Front left
  • Splines wheel side: 26
  • Total length: 693 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:116611
  • Position: Front left
  • Splines wheel side: 26
  • Total length: 693 mm
  • Diameter 1: 90 mm
  • ABS teeth: 45
Item no.:118716
  • Position: Front left
  • Splines wheel side: 26
  • Total length: 693 mm
  • Diameter 1: 90 mm
  • ABS teeth: 96
Item no.:312578
  • Position: Front
  • Splines wheel side: 26
  • Total length: 660 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:317044
  • Position: Front
  • Splines wheel side: 26
  • Total length: 660 mm
  • Joint diameter: 90 mm
  • ABS teeth: 96
Item no.:212464
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 635 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:214641
  • Position: Front right
  • Splines wheel side: 38
  • Total length: 635 mm
  • Joint diameter: 90 mm
  • ABS teeth: 45
Item no.:111719
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 598 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:113841
  • Position: Front left
  • Splines wheel side: 38
  • Total length: 598 mm
  • Joint diameter: 90 mm
  • ABS teeth: 45
Item no.:0472358
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 108 mm
Item no.:0606544
  • Total length: 122 mm
Item no.:0989812
  • Inner diameter: 24 mm
  • Outer diameter: 40 mm
Item no.:332146
  • ABS teeth: 45
  • Inner diameter: 64 mm
  • Outer diameter: 74 mm
  • Width: 8,1 mm
Item no.:0619405
  • Total length: 89 mm
Item no.:0600549
  • Total length: 92 mm
Item no.:0684226
  • Total length: 113 mm
Item no.:342308
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 108 mm
Item no.:0671097
  • Total length: 113 mm
Showing 1–24 of 25 products

Audi 100 Avant 2.2 drivetrain

The Audi 100 Avant 2.2 represents an era of German engineering where durability and mechanical precision were paramount. The drivetrain on this model is a sophisticated assembly responsible for transferring power from the distinctive five-cylinder 2.2-litre engine to the road. Maintaining the comfort and stability for which the Audi 100 is renowned requires every link in the power transmission system to be in peak condition. As drivetrain specialists, we understand the specific demands of the Audi 100 Avant 2.2. We have curated a range that not only matches but frequently exceeds original specifications, ensuring your car remains dependable for many kilometres to come. Investing in premium drivetrain components is one of the most effective ways to prolong your vehicle's lifespan and preserve its handling characteristics.

How the Audi 100 Avant 2.2 drivetrain is built

The drivetrain layout of an Audi 100 Avant 2.2 is engineered to cope with substantial torque and the diverse stresses of varied road conditions. The system begins at the gearbox, where output shafts connect to the inner CV joints. These inner joints are vital as they allow the drive shaft to plunge in and out as the suspension articulates. Power then travels along the drive shaft itself—a robust solid steel bar—to the outer CV joint at the wheel hub. This outer joint is an engineering triumph, delivering continuous power while the front wheel turns through tight steering angles. The whole assembly is protected by rubber boots packed with specialised high-pressure grease. On cars equipped with anti-lock brakes, an ABS ring is fitted—typically on the outer joint—which is monitored by a wheel-speed sensor to regulate braking pressure during heavy stops or skids.

Common faults and symptoms

There are several classic signs of drivetrain wear that every Audi 100 Avant 2.2 owner should listen and look for. The most frequent symptom is a rhythmic clicking noise heard on full steering lock, such as when parking or turning a tight corner. This sound almost always points to a worn outer constant velocity joint whose ball bearings have begun scouring grooves into the internal raceways. Another common issue is vibration felt through the car under acceleration, which subsides as soon as you lift off the accelerator. This typically indicates play in the inner CV joints or a distorted driveshaft. It is also essential to inspect the boots regularly; a split boot quickly expels its vital grease while letting in road grit and moisture, destroying the joint in very little time. Finally, a cracked or corroded ABS ring can trigger the ABS warning light or cause the system to activate unexpectedly at low speeds.

Common parts to replace on the Audi 100 Avant 2.2

When repairing your Audi 100 Avant 2.2, having access to correct spare parts that match the car's precise specifications is critical. In our range, you will find a broad selection of parts carefully selected for fit and longevity. We currently offer 12 different types of complete drive shafts, covering the vast majority of configurations for this model. If you only need to replace an individual component, we supply multiple options for outer CV joints as well as inner CV joints. To safeguard these assemblies, we provide 6 different CV boot kits, containing everything needed for a thorough overhaul including specialist grease and securing clamps. For cars fitted with ABS, we also stock the correct ABS ring.

  • Drive shaft for Audi 100 Avant 2.2 - Complete shafts for a swift and straightforward replacement.
  • Outer CV joint for Audi 100 Avant 2.2 - High-grade joints for the wheel hub side.
  • Inner CV joint for Audi 100 Avant 2.2 - Precision-manufactured joints for the gearbox side.
  • CV boots for Audi 100 Avant 2.2 - Durable protective gaiters to extend joint service life.
  • ABS ring for Audi 100 Avant 2.2 - To maintain correct operation of your braking safety systems.

How to find the right part for your Audi 100 Avant 2.2

Select the relevant subcategory for your Audi 100 Avant 2.2:

With multiple potential drivetrain faults, it is best to narrow down the correct category straight away. Comparing the specific subcategories for the Audi 100 Avant 2.2 makes it simple to distinguish between drive shaft, CV joint or propeller shaft issues, leading you to the right section matching your symptoms and specifications.

Finding the correct components can seem daunting, but we have made the process straightforward for your Audi 100 Avant 2.2. The most reliable way to identify suitable parts is to select your vehicle's exact make, model and engine variant in our catalogue. This pairs your car's specifications directly with our extensive drivetrain database. This is particularly important for classic Audi models of this generation, where spline counts and shaft dimensions can vary depending on the production month or transmission type. If you are ever unsure, we recommend counting the splines on your original part or checking its dimensions before placing an order. Our goal is to ensure you get the right part first time and prevent inconvenient returns. Backed by our specialist expertise, you can purchase with confidence knowing your new parts will fit your vehicle accurately.

Why shop with CVJoint24

Choosing CVJoint24 for your Audi 100 Avant 2.2 parts means partnering with a team passionate about automotive drivetrains. As the international platform of a Swedish driveline specialist, we place engineering quality and customer satisfaction at the heart of what we do. Our specialist focus on drivetrains ensures in-depth coverage that general car parts retailers rarely provide. We understand how important it is to get your vehicle back on the road without delay, which is why we dispatch quickly across Europe from our central Swedish warehouse. Enjoy accurate fitment and dedicated technical assistance whenever you have questions. For reliable driveline components, CVJoint24 is your dedicated partner from initial order through to completed repair.

Frequently Asked Questions about Drivetrain for Audi 100 Avant 2.2

How do I know if my Audi 100 Avant 2.2 needs a new drive shaft?

The most common signs are heavy vibrations under acceleration or unusual noises while driving. If the vibrations disappear when you lift off the accelerator, it is often a worn inner CV joint or the drive shaft itself.

Can I replace just the CV boot if it is split?

Yes, if you catch the damage early and the joint is still clean and properly greased, you can replace just the CV boot. If dirt has entered or the joint has started to make noises, the entire CV joint should be replaced.

What is the difference between an inner and outer CV joint on my Audi?

The outer CV joint sits at the wheel and accommodates steering angles, while the inner CV joint connects to the gearbox and accommodates the longitudinal travel from the suspension.

Do all drive shafts fit all Audi 100 Avant 2.2 models?

No, there can be differences depending on gearbox type and model year. Always filter by your car's make, model and engine to ensure you get the correct part for your specific vehicle.

Why is the ABS light illuminated after replacing a CV joint?

This is usually because the ABS ring on the new joint has the wrong number of teeth or the gap to the sensor is incorrect. Check that the ABS reluctor ring matches your old part exactly.

How fast do you dispatch parts for the Audi 100 Avant 2.2?

We offer fast delivery on most of our in-stock parts, helping you get your car back on the road as quickly as possible.