Audi 100 2.2 Quattro

Welcome to CVJoint24, your Swedish driveline specialist for the Audi 100 2.2 Quattro. We supply a comprehensive range of premium car parts to ensure your four-wheel-drive classic...

Products for Audi 100 2.2 Quattro

25 products
25 - 25 of 25
Item no.:345421
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 108 mm
Showing 25–25 of 25 products

Drivetrain for Audi 100 2.2 Quattro

The Audi 100 2.2 Quattro represents an era of engineering brilliance where Audi's four-wheel-drive system set a new benchmark for passenger cars. Maintaining its legendary roadholding and precise power delivery requires components manufactured to exacting tolerances. The drivetrain on this specific model variant is exposed to considerable stresses, especially when driving on varied surfaces where the Quattro system works at its hardest. Here at CVJoint24, you will find a carefully curated selection of spare parts tailored specifically to the 2.2 Quattro engine and its transmission. We understand how vital it is that every component, from the smallest circlip to complete shafts, operates in perfect harmony. Choosing the right parts safeguards not only your car's reliability, but also its historic value and handling characteristics. Our focus is on supplying components capable of withstanding the torque and mechanical forces generated by the 2.2-litre engine alongside the all-wheel-drive system.

How the drivetrain is configured on the Audi 100 2.2 Quattro

The drivetrain on an Audi 100 2.2 Quattro is a sophisticated system engineered to distribute the engine's power efficiently to all four wheels. It begins with the longitudinally mounted engine mated to a gearbox featuring an integrated centre differential. From here, power is sent forwards to the front axle and rearwards via a propeller shaft to the rear axle. Each pair of wheels is equipped with drive shafts, each fitted with two joints. An outer CV joint sits at the wheel hub, accommodating both steering angles and vertical suspension travel. On the inboard side, towards the differentials, an inner CV joint manages the longitudinal variations in shaft position as the wheels move up and down. This entire mechanism relies on intact CV boots to retain the specialised grease that lubricates the joints and to prevent ingress of water and road salt. Furthermore, the ABS system is integrated into the drivetrain via sensor rings that read wheel speeds, which is vital for braking efficiency and the four-wheel-drive system's operation.

Common faults and symptoms

Identifying drivetrain issues on an Audi 100 2.2 Quattro requires attention to both sounds and vibrations. One of the most typical signs of wear is a rhythmic clicking noise when cornering sharply at low speeds, which almost invariably points to a worn outer constant velocity joint. If you instead experience vibrations throughout the vehicle under acceleration, particularly at higher speeds, it may indicate that the inner joints have developed play or that a driveshaft has become distorted. Another common problem is corrosion on an ABS ring, causing the ABS to pulse during normal braking or triggering the dashboard warning light. You should also watch for grease splatters on the inside of the wheel rims or underneath the car, which is an unmistakable sign of a split CV boot. Left unaddressed, the joint will soon fail due to lubrication loss and grit ingress, resulting in a considerably more extensive and costly repair.

Common parts to replace on the Audi 100 2.2 Quattro

When servicing or repairing your Audi 100 2.2 Quattro, certain components naturally need replacing more often than others due to regular wear and tear. Our stock is geared to meet these requirements with high availability. For this model variant, we supply parts categorised as follows:

  • Drive shaft Audi 100 2.2 Quattro
  • Outer CV joint Audi 100 2.2 Quattro
  • Inner CV joint Audi 100 2.2 Quattro
  • CV boots Audi 100 2.2 Quattro
  • ABS ring Audi 100 2.2 Quattro

Opting for a complete drive shaft is frequently a sensible investment for a Quattro owner, as it guarantees that both inner and outer joints as well as boots are brand new, saving workshop labour and providing a durable solution to vibration problems. We ensure you receive components that match original specifications to preserve the car's distinctive driving dynamics.

Finding the right part for your Audi 100 2.2 Quattro

Proceed to the relevant section for your Audi 100 2.2 Quattro:

On a vehicle with several possible driveline issues, it pays to start directly in the correct category. Comparing the exact component sections for the Audi 100 2.2 Quattro makes it simpler to differentiate between faults in a drive shaft, CV joint or prop shaft, and to navigate straight to the page best suited to your symptoms and fitment.

Finding the correct replacement part for an Audi 100 2.2 Quattro requires accuracy, as subtle variations in specification can occur across different chassis numbers. To streamline your search and guarantee proper fitment, select your vehicle's make, model and engine variant in our store. This immediately filters our catalogue so you only see parts technically compatible with your car. Nonetheless, it remains good practice to check the technical specifications in the product description. Pay special attention to the spline count on both the inner and outer sections of the joint, as well as the oil seal diameter. On Quattro models, it is equally important to confirm whether the component is intended for the front or rear axle, as lengths and dimensions frequently differ. If you plan to replace a joint, remember to inspect your drive shaft boots; if they exhibit any signs of perishing or cracking, replace them at the same time to protect your new investment.

Why shop with CVJoint24

CVJoint24 is far more than an ordinary online retailer; we are the international shop of a Swedish driveline specialist, operating with a central warehouse in Helsingborg, Sweden, and delivering across the EU. When sourcing parts for your Audi 100 2.2 Quattro from us, you benefit from our specialist expertise and commitment to quality. We recognise that owners of classic Quattro models demand exacting standards from their spare parts, which is why we only stock components we trust. Our fitment guarantee eliminates the risk of incorrect orders, and choosing your car by make, model and engine makes identifying the right part straightforward. We dispatch orders rapidly so you can get your car back on the road without unnecessary delay. Combining technical expertise with reliable logistics and customer support that genuinely understands drivetrains, we are the obvious choice for Audi enthusiasts. With us, you receive the right product, exceptional quality and the peace of mind required to maintain a technologically advanced car like the Audi 100 2.2 Quattro.

Frequently Asked Questions about the Drivetrain for Audi 100 2.2 Quattro

When should I replace the drive shaft on my Audi 100 2.2 Quattro?

A drive shaft should be replaced if you experience severe vibrations under acceleration or hear unusual noises that persist after replacing individual CV joints. On a Quattro model, it is particularly important to inspect the shafts both front and rear.

What are the most common signs of a failing outer CV joint?

The most common symptom is a clicking or knocking noise that is clearly audible when turning on full lock at low speeds. This is usually caused by dirt penetrating the joint through a damaged CV boot.

Does the same CV joint fit both front and rear on a Quattro?

No, the CV joints generally differ between the front and rear axles on the Audi 100 2.2 Quattro. It is therefore essential to check your car's make, model and engine details to ensure you select the correct part for the specific position.

Why is it important to replace CV boots in good time?

The CV boot protects the CV joint by keeping the lubricating grease in place and sealing out dirt and moisture. A split boot quickly leads to premature wear of the constant velocity joint, resulting in far more expensive repair costs.

How do I know if my ABS ring is damaged?

If the ABS warning light illuminates or you feel the ABS pulsating erratically under normal braking, it may be due to a cracked or heavily corroded ABS ring. A visual inspection will often confirm if the ring is split or broken.

Can I replace just the CV joint, or must the entire shaft be renewed?

You can certainly replace just the CV joint if the shaft itself is straight and undamaged. However, if multiple joints are worn or the shaft suffers from severe corrosion, replacing the complete drive shaft can be more economical and reliable.