Audi 80 Avant 2.0

Welcome to cvjoint24.com, your Swedish driveline specialist for the Audi 80 Avant 2.0. Maintaining the drivetrain on a classic model like the Audi 80 Avant 2.0 requires precision...

Products for Audi 80 Avant 2.0

17 products
1 - 17 of 17
Item no.:1119709
  • Position: Front left
  • Splines wheel side: 33
  • Total length: 586 mm
  • Joint diameter: 90 mm
  • ABS teeth: 45
Item no.:2122000
  • Position: Front right
  • Splines wheel side: 33
  • Total length: 573 mm
  • Joint diameter: 90 mm
  • ABS teeth: 45
Item no.:0378388
  • ABS teeth: 45
  • Inner diameter: 64 mm
  • Outer diameter: 74 mm
  • Width: 8,1 mm
Item no.:0517160
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 53 mm
  • Outer splines: 33
  • ABS teeth: 45
Item no.:7301785
  • Position: Front left
  • Splines wheel side: 33
  • Total length: 586 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:7301922
  • Position: Front right
  • Splines wheel side: 33
  • Total length: 573 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:1110019
  • Position: Front left
  • Splines wheel side: 33
  • Total length: 470 mm
  • Diameter 1: 88 mm
  • Diameter 2: 130 mm
Item no.:112303
  • Position: Front left
  • Splines wheel side: 33
  • Total length: 470 mm
  • Diameter 1: 88 mm
  • ABS teeth: 45
Item no.:214470
  • Position: Front right
  • Splines wheel side: 33
  • Total length: 523 mm
  • Diameter 1: 88 mm
  • Diameter 2: 130 mm
Item no.:216222
  • Position: Front right
  • Splines wheel side: 33
  • Total length: 523 mm
  • Diameter 1: 88 mm
  • ABS teeth: 45
Item no.:341429
  • Position: Front, Inner
  • Inner splines: 33
  • Splines gearbox side: 33
  • Total length: 32 mm
Item no.:1109625
  • Position: Front left
  • Splines wheel side: 38
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
  • ABS teeth: 45
Item no.:2118702
  • Position: Front right
  • Splines wheel side: 38
  • Joint diameter: 88 mm
  • Joint diameter, gearbox side: 100 mm
  • ABS teeth: 45
Item no.:357819
  • Position: Front, Outer
  • Inner splines: 30
  • Seal diameter: 53 mm
  • Outer splines: 33
  • Thread size: M14X1,5
Item no.:0698039
  • Total length: 88 mm
Item no.:340811
  • Position: Front, Inner
  • Inner splines: 33
  • Seal diameter: 94 mm
  • Total length: 32 mm
  • Joint diameter: 94 mm
Item no.:0962070
  • Inner diameter: 24 mm
  • Outer diameter: 40 mm

Drivetrain for Audi 80 Avant 2.0

The Audi 80 Avant 2.0 is an iconic model renowned for its robust construction and dependable mechanicals. The drivetrain in this vehicle is the heart of the power delivery, where every component from the gearbox out to the wheels plays a crucial role in performance and safety. As driveline specialists, we understand the importance of supplying parts that match original factory specifications precisely. For the Audi 80 Avant 2.0, this means components built to withstand the demands of daily driving, whether in heavy urban traffic or on long motorway journeys. By selecting the correct spare parts, you not only extend your car's lifespan but also ensure that its handling remains optimal. We have brought together a dedicated range to help you quickly find what you need, with a constant focus on durability and an exact fit for the 2.0 variant.

How the drivetrain is configured on the Audi 80 Avant 2.0

The layout of the drivetrain on an Audi 80 Avant 2.0 is classic German engineering, focused on durability and efficient power delivery. Power from the 2.0-litre engine is transferred via the gearbox to the front drive shafts. Each Audi 80 Avant 2.0 driveshaft is equipped with two joints: an inner and an outer. The inner joint mounts to the gearbox and accommodates axial movement as the suspension travels, which is vital for ride comfort. The outer joint at the wheel hub enables steering while continuously transmitting torque. To protect these precision components, CV boots for the Audi 80 Avant 2.0 keep vital lubricating grease in place while sealing out dirt and moisture. Additionally, an ABS ring is fitted on the Audi 80 Avant 2.0 to send correct signals to the braking system, ensuring that your safety systems operate without fault.

Common faults and symptoms

There are several clear signs that drivetrain components on your Audi 80 Avant 2.0 are beginning to wear. One of the most common symptoms is a clicking or knocking noise when cornering on full steering lock, which typically indicates a defective outer CV joint on your Audi 80 Avant 2.0. If you instead experience vibrations through the steering wheel or bodywork under acceleration, it may signal that an inner constant velocity joint on your Audi 80 Avant 2.0 has developed play or lost its lubrication. Another frequent issue is an illuminated ABS warning light on the dashboard, often caused by a cracked or corroded ABS ring providing inaccurate wheel-speed readings to the sensor. Finally, always look out for grease splattered on the inside of the wheel rim or wheel arch, which is a definitive sign of a torn CV boot. Ignoring these symptoms can result in complete failure and significantly more expensive repairs down the road.

Common replacement parts for the Audi 80 Avant 2.0

For the Audi 80 Avant 2.0, we have identified the key components that most frequently require attention to keep the vehicle completely roadworthy. Our range includes several specific parts for this exact model variant, carefully selected to satisfy our stringent quality requirements. Here are the core categories to focus on during maintenance:

  • Drive shaft for Audi 80 Avant 2.0 – We supply several variants to cater for all technical specifications.
  • Outer CV joint for Audi 80 Avant 2.0 – 2 high-quality options for optimal steering and smooth power delivery.
  • Inner CV joint for Audi 80 Avant 2.0 – 2 robust joints ensuring steady torque transfer from the gearbox.
  • CV boots for Audi 80 Avant 2.0 – 1 comprehensive kit vital for safeguarding your CV joints against premature wear.
  • ABS ring for Audi 80 Avant 2.0 – 1 precision part to restore correct braking performance and safety.
By replacing worn components in good time, you prevent breakdowns and preserve your car's original driving dynamics. We recommend checking the condition of your CV boots at every service, as even a hairline split can ruin an entire CV joint by letting in road grit.

How to find the right part for your Audi 80 Avant 2.0

Navigate directly to the appropriate section for the Audi 80 Avant 2.0:

When dealing with multiple potential driveline issues, it pays to start in the correct category right away. By checking the specific subcategories for the Audi 80 Avant 2.0, it becomes straightforward to distinguish between drive shaft, CV joint, or prop shaft faults, allowing you to proceed to the page that matches your symptoms and fitment needs.

Finding the right spare part for a classic car can sometimes feel challenging, but at cvjoint24.com we have made the entire process straightforward and reliable. The easiest way to ensure an exact fit is to select your vehicle by make, model and engine variant in our catalogue. Because the Audi 80 Avant 2.0 may feature driveline variations depending on production month or specific chassis numbers, our database filters out everything except the parts engineered for your exact car. This gives you complete peace of mind when ordering. Should you still feel unsure about technical details such as overall dimensions or spline counts, our technical expertise is always available to guide you through our comprehensive catalogue. Our goal is to help you get the right part on the first attempt without unnecessary returns, so your Audi can get back out on the road without delay.

Why shop with cvjoint24.com

CVJoint24 is far more than just another online retailer; we are a dedicated Swedish driveline specialist focused purely on drivetrain and power transmission components. When you order from us, you gain access to an in-depth technical understanding that few suppliers can match, particularly for cherished classics like the Audi 80 Avant 2.0. We dispatch orders directly from our central warehouse in Helsingborg, Sweden, giving us full control over parts quality and speedy dispatch across the EU. Our commitment is to offer the right part at the right price, supported by customer service that genuinely understands the mechanical demands of your car's drivetrain. Choose a specialist passionate about your vehicle's performance and longevity – choose cvjoint24.com for a safe, reliable, and smooth experience whenever you need parts for your Audi.

Frequently Asked Questions about Drivetrain Parts for Audi 80 Avant 2.0

How do I know if the drive shaft on my Audi 80 Avant 2.0 is faulty?

The most common symptoms are vibrations during acceleration or a clicking sound when cornering. If the vibrations increase with speed, it is often due to the inner joint or an unbalanced shaft.

Can I replace just the CV boot if the joint is still working?

Yes, if you catch a split boot early before dirt enters the joint, it is usually enough to thoroughly clean the joint, repack it with grease and fit a new CV boot.

Why is the ABS warning light on in my Audi 80?

On the Audi 80 Avant 2.0, a cracked or dirty ABS ring is a very common cause. The ring is located on the CV joint; if it breaks or cracks, the sensor loses its signal, triggering the warning light.

Do all drive shafts fit every Audi 80 model?

No, there are variations depending on engine size and gearbox type. For the Audi 80 Avant 2.0, it is vital to check spline counts and overall length, which is easily done by selecting your make, model and engine variant on our site.

What is included in a CV joint kit for the Audi 80 Avant 2.0?

Our kits typically include the CV joint itself, a vehicle-specific CV boot, high-grade grease, circlips and all essential mounting hardware to complete the repair.

How quickly will parts for my Audi be delivered?

We dispatch promptly across Europe directly from our central warehouse in Helsingborg, Sweden, ensuring fast and dependable delivery times.