Audi 80 1.8 CC Quattro

Welcome to cvjoint24.com, the international shop of a Swedish driveline specialist for the Audi 80 1.8 CC Quattro. This classic four-wheel-drive saloon requires quality components to...

Products for Audi 80 1.8 CC Quattro

28 products
1 - 24 of 28
Item no.:0452515
  • Position: Inner
  • Inner splines: 33
  • Seal diameter: 100 mm
  • Total length: 34 mm
  • Joint diameter: 100 mm
Item no.:0593770
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 56 mm
  • Outer splines: 26
  • ABS teeth: 46
Item no.:3553696
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 51 mm
  • Outer splines: 22
  • Thread size: M16X1,5
Item no.:3567222
  • Position: Outer
  • Inner splines: 30
  • Seal diameter: 51 mm
  • Outer splines: 22
  • ABS teeth: 96
Item no.:0598470
  • Position: Outer
  • Inner splines: 25
  • Seal diameter: 56 mm
  • Outer splines: 26
  • ABS teeth: 96
Item no.:0385093
  • ABS teeth: 96
  • Inner diameter: 64 mm
  • Outer diameter: 73 mm
  • Width: 8,1 mm
Item no.:0101588
  • Splines wheel side: 22
  • Total length: 627 mm
  • Joint diameter: 81 mm
  • Joint diameter, gearbox side: 94 mm
  • Flange diameter: 94 mm
Item no.:214236
  • Position: Front right
  • Splines wheel side: 22
  • Total length: 594 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:216058
  • Position: Front right
  • Splines wheel side: 22
  • Total length: 594 mm
  • Joint diameter: 90 mm
  • ABS teeth: 96
Item no.:111308
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 642 mm
  • Diameter 1: 90 mm
  • Diameter 2: 100 mm
Item no.:117897
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 642 mm
  • Joint diameter: 90 mm
  • ABS teeth: 96
Item no.:0184993
  • Splines wheel side: 26
  • Total length: 654 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 94 mm
  • Flange diameter: 94 mm
Item no.:518302
  • Position: Rear right
  • Splines wheel side: 26
  • Total length: 654 mm
  • Joint diameter: 90 mm
  • ABS teeth: 96
Item no.:414831
  • Position: Rear left
  • Splines wheel side: 26
  • Total length: 619 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 94 mm
Item no.:418035
  • Position: Rear left
  • Splines wheel side: 26
  • Total length: 619 mm
  • Joint diameter: 90 mm
  • ABS teeth: 96
Item no.:2193008
  • Position: Front right
  • Splines wheel side: 22
  • Total length: 588 mm
  • Joint diameter: 81 mm
  • Joint diameter, gearbox side: 94 mm
Item no.:1148020
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 685 mm
  • Joint diameter: 81 mm
  • Joint diameter, gearbox side: 94 mm
Item no.:416872
  • Position: Rear left
  • Splines wheel side: 26
  • Total length: 610 mm
  • Joint diameter: 98 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:412745
  • Position: Rear left
  • Splines wheel side: 26
  • Total length: 610 mm
  • Joint diameter: 98 mm
  • ABS teeth: 96
Item no.:518157
  • Position: Rear right
  • Splines wheel side: 26
  • Total length: 656 mm
  • Diameter 1: 98 mm
  • Diameter 2: 108 mm
Item no.:515088
  • Position: Rear right
  • Splines wheel side: 26
  • Total length: 656 mm
  • Diameter 1: 98 mm
  • ABS teeth: 96
Item no.:0468118
  • Position: Inner
  • Inner splines: 28
  • Seal diameter: 108 mm
  • Total length: 32 mm
  • Joint diameter: 108 mm
Item no.:359347
  • Position: Front, Outer
  • Inner splines: 30
  • Seal diameter: 51 mm
  • Outer splines: 22
  • Thread size: M16X1,5
Showing 1–24 of 28 products

Audi 80 1.8 CC Quattro drivetrain

The Audi 80 1.8 CC Quattro represents an important era in motoring history where four-wheel drive became accessible to a wider audience. To keep this classic delivering the stability and power transmission that define the Quattro system, every component in the drivetrain must function flawlessly. As specialists in All car makes drivetrains, we understand the unique demands placed on this particular model. With 15 specifically matched products in our range, we cover the most critical requirements for your car's power transfer. Owning an Audi 80 1.8 CC Quattro brings a responsibility to maintain its mechanical heart, and we are here to provide you with the right parts. Our focus is on offering components that not only fit physically, but also meet the high standards needed to handle the torque and stresses generated in a four-wheel-drive system. Choosing the correct spare parts extends the lifespan of your vehicle and ensures confident driving in all weather conditions.

How the drivetrain is engineered on the Audi 80 1.8 CC Quattro

The drivetrain layout of the Audi 80 1.8 CC Quattro is a piece of engineering art, pairing a longitudinal engine with a sophisticated power-distribution system. Unlike front-wheel-drive models, the Quattro version features a more complex setup with extra components to drive the rear wheels. Power travels from the gearbox via a centre differential out to both front and rear axles. This means the car is equipped with multiple drive shafts and CV joints that must all work together seamlessly. The front end of your Audi 80 demands robust drive shafts capable of managing steering angles and power delivery simultaneously. The inner CV joint plays a crucial role here by accommodating angular changes during suspension travel without losing transmission efficiency. Understanding this complexity is key to selecting the right car parts. Every link in the chain, from the gearbox output flange to the wheel hub, is dimensioned to deliver maximum grip, which is the very essence of the Quattro experience.

Common faults and symptoms

Catching drivetrain issues early can save both time and money. On an Audi 80 1.8 CC Quattro, the most common signs of wear involve the constant velocity joints and shafts. If you hear a rhythmic clicking noise when turning on full lock under acceleration, this is often a sign that an outer CV joint is failing. Vibrations felt through the car's floorpan or chassis during acceleration, which vanish when you ease off the throttle, frequently point to a worn inner CV joint on the Audi 80 1.8 CC Quattro. It is equally important to inspect the CV boots regularly; a split boot lets in grit and moisture while allowing grease to escape, rapidly destroying the joint. On a four-wheel-drive car, an out-of-balance driveshaft can also stress other components, such as differentials and bearings. By staying alert to these symptoms, you can take action before a minor problem turns into an expensive breakdown that leaves you stranded at the roadside.

Common parts to replace on the Audi 80 1.8 CC Quattro

In our range for the Audi 80 1.8 CC Quattro, we place special emphasis on the components exposed to the greatest wear. We currently offer several variants of the drive shaft for the Audi 80 1.8 CC Quattro, ensuring coverage across different technical specifications and model years. In addition to complete shafts, we stock individual inner CV joints. Replacing an entire drive shaft is often a time-efficient way to restore drivetrain integrity, as you receive new inner and outer joints alongside fresh CV boots in a single assembly. For those who prefer to overhaul their existing shafts, our top-quality inner constant velocity joints are an excellent choice. Here are the most relevant categories for your vehicle:

  • Drive shaft Audi 80 1.8 CC Quattro – Complete assemblies for reliable power transfer.
  • Inner CV joint Audi 80 1.8 CC Quattro – Precision-engineered joints for gearbox mounting.

These components are vital for maintaining original handling characteristics and ensuring engine torque reaches the road smoothly and quietly.

Finding the right part for your Audi 80 1.8 CC Quattro

Navigate directly to the relevant section for your Audi 80 1.8 CC Quattro:

On a vehicle with several possible drivetrain issues, it pays to start in the correct category straight away. Comparing specific part categories for the Audi 80 1.8 CC Quattro makes it simple to distinguish between drive shaft, CV joint or propeller shaft problems and proceed to the page that best matches your symptoms and fitment needs.

Sourcing the exact replacement part for a classic Audi can sometimes feel daunting, but cvjoint24.com makes the process straightforward. The most reliable method is to select your car's make, model and engine variant in our catalogue. This filters our range down to the exact parts matching your Audi 80 1.8 CC Quattro. It is always wise to double-check key technical dimensions, such as ABS ring tooth counts or overall driveshaft length, as minor variations can occur depending on production dates or previous repairs. Our platform provides the technical data you need to pick correctly the first time. If you have any doubts about compatibility, our specialist team is on hand to assist. We aim to take the guesswork out of ordering car parts, saving you garage time and unnecessary returns.

Why shop with cvjoint24.com

CVJoint24 is the international shop of a Swedish driveline specialist shipping directly from our warehouse in Helsingborg, Sweden. When you buy parts for your Audi 80 1.8 CC Quattro from us, you benefit from focused expertise and a carefully curated inventory. We understand how important it is to get your vehicle back on the road quickly, which is why we dispatch orders promptly across the European Union. We combine high component quality with competitive prices, making us a dependable partner for both DIY mechanics and professional garages. By concentrating exclusively on drivelines, we provide an in-depth level of technical support that general parts factors rarely match. Choose cvjoint24.com for reliable parts, correct fitment and drivetrain performance you can trust mile after mile.

Frequently asked questions about drivetrain parts for Audi 80 1.8 CC Quattro

Which drivetrain parts fit my Audi 80 1.8 CC Quattro?

We stock 15 specific parts for the Audi 80 1.8 CC Quattro, including drive shafts and inner CV joints. Select your car's make, model and engine to find the exact parts that fit your vehicle.

How do I know if my inner CV joint is worn or damaged?

Common symptoms of a faulty inner CV joint include vibrations through the car under acceleration that disappear once you lift off the throttle. You may also hear clunking noises under load.

Is it difficult to replace a drive shaft yourself on a Quattro?

It requires some mechanical experience and the correct tools, such as a socket set and a torque wrench. Because Quattro models have a more complex drivetrain, the job can take slightly longer than on a front-wheel-drive car.

Do your drive shafts come with CV boots and grease?

Yes, our complete drive shafts are supplied fully assembled with CV boots, high-quality grease and the necessary fixings so you can carry out the replacement straight away.

How quickly will parts for my Audi 80 be delivered?

We offer next-day dispatch on stocked items, meaning your parts are shipped promptly from our warehouse following your order.

What does your fitment guarantee mean?

Our fitment guarantee means we ensure the part you order will fit your Audi 80 1.8 CC Quattro whenever you select your vehicle by make, model and engine variant.