Audi 90 2.2 E Quattro

Spare parts and driveline components for Audi 90 2.2 E Quattro. Check fitment by selecting your make, model and engine before ordering.

Products for Audi 90 2.2 E Quattro

37 products
25 - 37 of 37
Item no.:512381
  • Position: Rear right
  • Splines wheel side: 26
  • Total length: 655 mm
  • Joint diameter: 90 mm
  • ABS teeth: 96
Item no.:419479
  • Position: Rear left
  • Splines wheel side: 26
  • Total length: 618 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 100 mm
Item no.:416060
  • Position: Rear left
  • Splines wheel side: 26
  • Total length: 618 mm
  • Joint diameter: 90 mm
  • ABS teeth: 96
Item no.:2132274
  • Position: Front right
  • Splines wheel side: 22
  • Total length: 595 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:2188797
  • Position: Front right
  • Splines wheel side: 22
  • Total length: 595 mm
  • Joint diameter: 90 mm
  • ABS teeth: 96
Item no.:7300633
  • Position: Inner
  • Inner splines: 33
  • Splines gearbox side: 33
  • Total length: 32 mm
Item no.:1117263
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 632 mm
  • Joint diameter: 81 mm
  • Joint diameter, gearbox side: 94 mm
Item no.:2138715
  • Position: Front right
  • Splines wheel side: 22
  • Total length: 618 mm
  • Joint diameter: 81 mm
  • Joint diameter, gearbox side: 94 mm
Item no.:1198679
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 642 mm
  • Joint diameter: 90 mm
  • Joint diameter, gearbox side: 108 mm
Item no.:1161067
  • Position: Front left
  • Splines wheel side: 22
  • Total length: 642 mm
  • Joint diameter: 90 mm
  • ABS teeth: 96
Item no.:355661
  • Position: Front, Outer
  • Inner splines: 30
  • Seal diameter: 53 mm
  • Outer splines: 33
  • Thread size: M14X1,5
Item no.:340444
  • Position: Front, Inner
  • Inner splines: 33
  • Seal diameter: 94 mm
  • Total length: 32 mm
  • Joint diameter: 94 mm
Item no.:0647733
  • Total length: 111 mm
Showing 25–37 of 37 products

Drivetrain for Audi 90 2.2 E Quattro

The Audi 90 2.2 E Quattro represents an era of engineering brilliance where four-wheel drive and performance unite in a unique combination. Maintaining that legendary driving pleasure and safety demands components built to withstand the specific stresses of a Quattro system. The drivetrain on this model is the heart of the car's ability to put power to the road in all driving conditions. As driveline specialists, we supply a carefully chosen range ensuring power transfer occurs without loss, unwanted noises or vibration. Whether you are restoring a classic or carrying out routine servicing, the right parts are vital for your car's longevity.

How the drivetrain is engineered on the Audi 90 2.2 E Quattro

The layout of the drivetrain on an Audi 90 2.2 E Quattro is both intricate and robust, engineered to handle the torque from its distinctive five-cylinder engine. The longitudinally mounted engine directs power through the gearbox to a centre differential, which in turn splits the torque between the front and rear axles. A crucial part of this system is the propeller shaft for Audi 90 2.2 E Quattro, which runs along the underside of the vehicle linking the front and rear drive assemblies. Furthermore, the system relies on drive shafts at both the front and rear, equipped with inner and outer CV joints to accommodate suspension travel and steering angles. This setup requires absolute precision at every coupling to prevent imbalance and premature wear on the differentials, making the choice of replacement parts essential.

Common faults and symptoms

Over time, even the most durable systems show signs of wear, especially on a car delivering the performance of the Audi 90 2.2 E Quattro. One of the most typical symptoms is a clicking or knocking sound on full lock under acceleration, which almost always indicates that an outer CV joint for Audi 90 2.2 E Quattro is failing. Vibrations felt through the bodywork during acceleration can usually be traced to a worn inner CV joint for Audi 90 2.2 E Quattro or an out-of-balance prop shaft. If the ABS warning light illuminates or the system pulses erratically under braking, the cause is frequently a cracked or corroded ABS ring for Audi 90 2.2 E Quattro. Overlooking these signs can lead to more costly consequential damage to the gearbox and differentials as vibrations reverberate through the entire driveline.

Common parts to replace on the Audi 90 2.2 E Quattro

Based on our extensive model-specific data, we see clear trends in which components most frequently require attention. We have structured our stock to satisfy these exact demands with high availability. For the Audi 90 2.2 E Quattro, our range includes:

  • Outer CV joints: We stock several variations to suit differences across chassis numbers and model years.
  • Inner CV joints: Specific units engineered to provide a robust, vibration-free link to the gearbox.
  • ABS rings: 2 ring variants with the exact tooth count required to deliver an accurate signal to the vehicle's safety systems.
  • Drive shafts: Complete units for mechanics wishing to replace the whole shaft swiftly and effectively.
  • Propeller shaft: Components designed to restore balance to the central driveline assembly.

By selecting the appropriate category, you can be confident of securing parts that restore the car's original driving performance.

How to find the right part for your Audi 90 2.2 E Quattro

Navigate directly to the appropriate section for the Audi 90 2.2 E Quattro:

When addressing a vehicle with several possible driveline issues, it pays to start in the correct category straight away. Comparing the exact sections for the Audi 90 2.2 E Quattro makes it straightforward to distinguish between faults in a drive shaft, constant velocity joint or prop shaft, directing you to the parts best matching your symptoms and vehicle specification.

Our fitment guarantee provides complete peace of mind that you will receive the correct component, and should you have any questions, our technical specialists are on hand to assist with the finer details.

Why shop with CVJoint24

CVJoint24 is the international shop of a Swedish driveline specialist, dispatching orders across the EU from our central warehouse in Helsingborg, Sweden. We understand the specific demands of the Audi 90 2.2 E Quattro and only supply car parts that satisfy our rigorous standards for quality and endurance. With our focused product range and technical know-how running far deeper than that of general motor factors, we deliver solutions tailored accurately to your car. When ordering from us, you receive high-grade spare parts backed by the reassurance that your vehicle will regain its original road manners and dependability. We are dedicated driveline specialists committed to keeping your car running smoothly for many kilometres to come.

Frequently Asked Questions about Drivetrain for Audi 90 2.2 E Quattro

What are the most common signs of a worn CV joint on my Audi 90 Quattro?

The most common symptoms are a clicking noise when cornering sharply (outer CV joint) or vibrations through the car under acceleration (inner CV joint). If you spot grease on the inside of the wheel rim, this can also be due to a split CV boot.

Does the same drive shaft fit both the front and rear axles on an Audi 90 2.2 E Quattro?

No, the drive shafts differ between front and rear due to different lengths and connections to the differentials. Always select your vehicle's make, model and engine variant to find the correct shaft for the right position.

Why does my car still vibrate even though I have replaced the CV joints?

On a Quattro model, vibrations can also originate from the propeller shaft or its centre bearing. It is important to ensure that the prop shaft is properly balanced and that the universal joints are in good working order.

How do I know which ABS ring fits my Audi 90?

There are two main variants for this model. The most reliable method is to count the number of teeth on the old ring, or select your car's exact model and engine specifications in our shop to find the correct part.

Are fitting accessories included when I buy a CV joint from you?

Yes, our CV joint kits are normally supplied complete with CV boot, grease, clamps, and a mounting bolt or nut to ensure a proper and straightforward replacement.

What does the fitment guarantee mean for my Audi 90 2.2 E Quattro?

This means that if you specify your car's exact details when ordering and we confirm fitment, we guarantee that the part will fit. In the unlikely event that it does not, we will help you exchange it for the correct part at no extra charge.