Audi A1 S1 Quattro

Spare parts and drivetrain components for the Audi A1 S1 Quattro. Select your make, model and engine to verify fitment before ordering.

Products for Audi A1 S1 Quattro

13 products
1 - 13 of 13
Item no.:4116111
  • Position: Rear left
  • Flange diameter: 100 mm
  • Total length: 594 mm
  • Splines wheel side: 36
Item no.:5181059
  • Position: Rear right
  • Flange diameter: 94 mm
  • Total length: 587 mm
  • Splines wheel side: 36
Item no.:5172861
  • Position: Rear right
  • Flange diameter: 100 mm
  • Total length: 631 mm
  • Splines wheel side: 36
Item no.:643285
  • Position: Rear, Inner
  • Diameter: 86 mm
  • Splines gearbox side: 33
  • Width: 34 mm
Item no.:656566
  • Position: Rear, Outer
  • Seal diameter: 59 mm
  • Inner splines: 33
  • Outer diameter: 82 mm
  • Splines wheel side: 36
Item no.:0412923
  • Position: Inner
  • ABS teeth: 0
  • Inner splines: 28
  • Joint diameter: 108 mm
  • Outer diameter: 108 mm
Item no.:0486725
  • Position: Inner
  • Seal diameter: 94 mm
  • Inner splines: 33
  • Number of joints: 3
  • ABS teeth: 0
Item no.:342604
  • Position: Inner
  • Inner splines: 26
  • Joint diameter: 119 mm
Item no.:0577464
  • Position: Outer
  • Seal diameter: 60 mm
  • Inner splines: 30
  • Outer splines: 36
  • ABS teeth: 0
Item no.:0699822
  • Height: 85 mm
  • Inner diameter: 22 mm
  • Outer diameter: 80 mm
Item no.:110572
  • Total length: 478 mm
  • Splines wheel side: 36
  • ABS teeth: 0
Item no.:218414
  • Total length: 575 mm
  • Splines wheel side: 36
  • ABS teeth: 0
Item no.:653352
  • Position: Rear, Outer
  • Seal diameter: 59,5 mm
  • Inner splines: 33
  • Total length: 80 mm
  • Splines gearbox side: 36

Audi A1 S1 Quattro drivetrain

The Audi A1 S1 Quattro is a unique machine in the hot hatch segment, where power transmission plays a decisive role in both performance and driving pleasure. As a high-performance variant of the Audi A1, the S1 Quattro demands components engineered to withstand the extra stress imposed by its advanced all-wheel-drive system. Maintaining the drivetrain is not merely a matter of mechanical reliability, but also of preserving the sharp, engaging driving dynamics Audi engineered for its S-models. At CVJoint24, we understand the technical requirements of this specialised model and supply a range tailored to cope with the loads of daily commuting as well as spirited driving on twisting back roads. Every part in our stock is selected to meet or exceed the demands of a car with such a high power-to-weight ratio as the S1 Quattro.

How the Audi A1 S1 Quattro drivetrain works

The drivetrain architecture of an Audi A1 S1 Quattro differs substantially from front-wheel-drive standard models in the same range. At the heart of the setup is an electronically controlled multi-plate clutch—often referred to as the Haldex system—mounted at the rear axle for optimal weight distribution. This system varies torque between the front and rear axles in fractions of a second depending on road conditions, grip levels and driver input. Drive is transferred from the gearbox via a robust propeller shaft to the rear differential, whilst front and rear drive shafts deliver power to the wheels to launch the car forward. This sophisticated layout demands precision throughout every link, from the inner constant velocity joints managing angular changes under hard acceleration to the outer CV joints enabling sharp steering under power. The entire system integrates closely with the vehicle's chassis electronics to provide classic Quattro stability across all surfaces.

Common faults and symptoms

Despite Audi's high manufacturing standards, the drivetrain of an S1 Quattro is exposed to considerable mechanical forces, which eventually results in wear. Frequent symptoms of wear include vibrations through the cabin or chassis under acceleration, often traceable to worn inner CV joints or an unbalanced prop shaft. Another telltale sign is a metallic clicking or knocking sound on full steering lock at low speeds, which indicates a failing outer CV joint. Noticing grease leaking around the CV boots is a critical alert that the protective rubber is split or torn, quickly allowing dirt and water to enter and destroy the precision-ground bearing surfaces. Ignoring these warning signs can lead to severe secondary damage to the gearbox and differential, as vibration and friction propagate through the entire power transfer system. Early diagnosis and timely replacement of worn car parts are vital for trouble-free ownership.

Common replacement parts for Audi A1 S1 Quattro

For owners of this model, the components delivering direct drive to the road require the most routine attention. The most sought-after component in our range is the Audi A1 S1 Quattro drive shaft, as driveshafts endure massive torque loads during standing starts and aggressive cornering. Alongside complete drive shafts, boot kits and ABS rings are regular service items required to maintain vehicle safety and traction systems. Because the S1 Quattro has a unique suspension geometry and drivetrain setup, it is essential not to confuse its components with those of standard A1 models. Key product areas for your car include:

  • Drive shafts for Audi A1 S1 Quattro – Complete units for both the front and rear axles.
  • CV joint kits – For repairing specific worn joints when the main shaft remains in good condition.
  • CV boots – High-grade rubber and thermoplastic boots preventing premature joint wear.
  • ABS rings – Ensuring accurate wheel-speed signals to the ABS and electronic stability control.

Choosing the correct spare parts ensures your Quattro system performs faultlessly in all conditions, from snowy European winters to hot, dry summer tarmac.

Find the right part for your Audi A1 S1 Quattro

Navigate directly to the relevant subcategory for your Audi A1 S1 Quattro:

With multiple potential drivetrain issues, starting directly in the right subcategory saves valuable time. By comparing specific sections for the Audi A1 S1 Quattro, it is straightforward to pinpoint whether you need a drive shaft, a CV joint or a prop shaft, and proceed to the exact page matching your symptoms and specifications.

Navigating spare parts catalogues can be tricky, especially for a niche performance car like the S1 Quattro where mechanical dimensions are unique. The most reliable way to select the right part is to use our vehicle selector at the top of the page by choosing your exact make, model and engine. This instantly filters out non-matching components, presenting only parts verified for your specific model and year. This is particularly important for all-wheel-drive Audi models, where overall shaft length, spline counts and flange mountings can vary by chassis number or production date. We always recommend confirming that your chosen item matches your car's technical details, such as gearbox type, before ordering. Our system is built to help you get the correct part the first time and avoid unnecessary returns or workshop delays.

Why buy from CVJoint24?

CVJoint24 is the international webshop of a Swedish driveline specialist based in Helsingborg, Sweden, dedicated entirely to drivetrain and power transmission parts. By focusing exclusively on this technical sector, we provide deep product expertise and specialist availability that broad-range car parts retailers rarely match. When you order from us, you receive premium-quality components backed by our accurate fitment standards. We recognise how crucial it is to get your vehicle back on the road without delay, packing and dispatching promptly across the European Union directly from our Swedish central warehouse. With our commitment to build quality, mechanical precision and dependable customer support, we are the natural choice for Audi owners who expect the best for their car's drivetrain.

Frequently Asked Questions about Drivetrain for Audi A1 S1 Quattro

How do I know if my Audi A1 S1 Quattro needs a new drive shaft?

The most common signs are vibrations through the car under acceleration or a clicking noise when turning sharply. If you spot grease on the inside of the wheel rim, it may be due to a split CV boot, which quickly leads to drive shaft failure.

Do drive shafts from a standard Audi A1 fit an S1 Quattro?

No, the S1 Quattro features a unique four-wheel drive drivetrain with heavy-duty components. It is therefore crucial to select your exact model and engine variant to find parts engineered specifically for the S1 model.

What is included when I buy a complete drive shaft from you?

Our complete drive shafts are supplied fully assembled with both inner and outer CV joints, fitted CV boots and the necessary grease, ready for immediate installation on your car.

How does your fitment guarantee work for the Audi S1?

When you filter by your car's make, model and engine, we guarantee that the parts displayed will fit your vehicle. In the unlikely event that something is not right, we will help you source the correct part at no extra charge.

Can I replace just the outer CV joint on my S1 Quattro?

Yes, if the drive shaft itself is straight and undamaged, you can save money by replacing only the worn CV joint. We supply individual joint kits that include everything you need for the replacement.

How quickly can I get my parts delivered?

We offer fast delivery across Europe for our stocked items, dispatched directly from our central warehouse so you receive your new drivetrain parts promptly.