Drive shafts for Audi A1 S1 Quattro

Looking for a replacement drive shaft for your Audi A1 S1 Quattro? As a Swedish driveline specialist, we offer a carefully selected range tailored to this high-performance model. With...

Products for Drive shafts for Audi A1 S1 Quattro

6 products
1 - 6 of 6
Item no.:4116111
  • Position: Rear left
  • Splines wheel side: 36
  • Total length: 594 mm
  • Diameter 2: 100 mm
  • Flange diameter: 100 mm
Item no.:5181059
  • Position: Rear right
  • Splines wheel side: 36
  • Total length: 587 mm
  • Joint diameter: 83 mm
  • Flange diameter: 94 mm
Item no.:5172861
  • Position: Rear right
  • Splines wheel side: 36
  • Total length: 631 mm
  • Diameter 2: 100 mm
  • Flange diameter: 100 mm
Item no.:614840
  • Position: Rear
  • Splines wheel side: 36
  • Total length: 630 mm
  • Joint diameter: 83 mm
  • Joint diameter, gearbox side: 94 mm
Item no.:110572
  • Position: Front left
  • Splines wheel side: 36
  • Total length: 478 mm
  • Diameter 1: 94 mm
  • Diameter 2: 108 mm
Item no.:218414
  • Position: Front right
  • Splines wheel side: 36
  • Total length: 575 mm
  • Diameter 1: 94 mm
  • Diameter 2: 123 mm

Drive shafts for Audi A1 S1 Quattro

The Audi A1 S1 Quattro is a unique machine in the hot hatch segment, where the combination of a compact chassis and a powerful Quattro system places extreme demands on every part of the drivetrain. The drive shaft is the critical link transferring engine torque to the wheels, and on an S1 model, these shafts are subjected to significantly higher loads than on standard A1 variants. At CVJoint24, we understand the technical nuances of the Audi A1 S1 Quattro and supply drive shafts engineered to handle the spirited driving this car is built for. Maintaining your drivetrain with the correct parts is not only a matter of reliability, but also of preserving the precise steering feel and poise that define a genuine S1.

What does a drive shaft do on the Audi A1 S1 Quattro?

The primary job of a drive shaft on an Audi A1 S1 Quattro is to transfer power from the gearbox and differentials out to all four driven wheels. Because the S1 uses an advanced all-wheel-drive system, the drive shafts must cope with rapid power shifts between axles as the system optimises grip. Each drive shaft comprises a shaft bar and two CV joints that accommodate both suspension movement and steering angles without interrupting power delivery. For a car with such a short wheelbase and high power output as the S1 Quattro, component precision is vital to prevent vibrations and driveline losses. A high-quality driveshaft ensures that every single horsepower reaches the tarmac efficiently, whether you are accelerating out of a tight bend or tackling demanding winter conditions.

Common signs of wear

When a drive shaft on your Audi begins to fail, there are several clear warning signs to watch out for. One of the most common symptoms is a clicking or knocking noise on full steering lock, which often points to a worn outer CV joint. If you experience vibrations through the car body under acceleration instead, this can indicate play in the inner constant velocity joint closest to the gearbox. On an Audi A1 S1 Quattro, it is also important to look for grease splattered inside the wheel rim or around the wheel arch, signalling a split CV boot. When the boot tears, grit enters and lubricating grease is thrown out, leading to rapid drive shaft failure if left unaddressed.

How to choose the correct drive shaft

Finding the exact drive shaft for an Audi A1 S1 Quattro can be tricky, as specifications differ markedly from front-wheel-drive A1 models. Key differences include length, spline counts and differential flange fittings. To ensure you receive a part that fits perfectly, we always recommend selecting your car's make, model and engine in our shop. We stock matching parts for this specific model, giving you reliable options without compromising on quality. Always check whether you need a front or rear drive shaft, and whether it is for the offside or nearside, as these are rarely identical on a Quattro vehicle. Backed by our expertise, we help you avoid incorrect orders and ensure your replacement meets original specifications.

Related parts to inspect

We also recommend checking these specific pages for the same vehicle when working on the drive shaft:

When one drivetrain component shows wear, adjacent parts on the same car often need inspecting as well. By comparing these dedicated pages for the Audi A1 S1 Quattro, it is easier to tell whether the issue lies with the drive shaft itself or another related part of the drivetrain.

This is especially important on performance models where vibrations, play and noises can travel between multiple driveline parts. A quick check of related categories reduces the risk of replacing the right type of part while overlooking an adjacent component contributing to the problem.

By replacing worn CV boots proactively, you can save significant expense by shielding the more costly CV joints from road dirt and moisture.

Why buy from CVJoint24?

CVJoint24 is your dedicated partner for vehicle drivetrains and power transmission. As a Swedish driveline specialist, we combine in-depth technical expertise with a specialised range that general car parts suppliers rarely match. We understand that your Audi A1 S1 Quattro requires top-tier spare parts, which is why we work exclusively with proven manufacturers. When you buy from us, you benefit from our guaranteed fitment and fast dispatch from our central warehouse. We minimise your garage downtime so you can get back on the road quickly, and our customer support team is always on hand to help with specific drivetrain queries. Our aim is to make finding the right part straightforward, so you can continue to enjoy your car's full potential.

Frequently asked questions about drive shafts for Audi A1 S1 Quattro

How do I know if my Audi A1 S1 Quattro needs a new drive shaft?

The most common signs are vibrations under acceleration, clicking noises on full lock, or visible grease leaks from split CV boots. If the vibrations increase with speed, it is usually time to inspect the driveline.

Can I replace just the CV joint instead of the entire shaft?

Yes, if the shaft bar itself is undamaged, you can often replace either the inner or outer CV joint separately. We offer both complete drive shafts and individual constant velocity joints for Audi A1 S1 Quattro.

Are the front and rear drive shafts different on an S1 Quattro?

Yes, the front and rear drive shafts differ in length, dimensions and mountings to suit the car's Quattro system and suspension setup. Select your make, model and engine to find the correct axle position.

Why is exact fitment particularly critical on the S1 model?

The S1 Quattro features a compact, high-performance drivetrain. The slightest deviation in length or splines can cause severe damage to the differentials or gearbox, making precise fitment vital.

How quickly will my new drive shaft be delivered?

We offer fast delivery across the EU on our stocked drive shafts, ensuring your order is dispatched swiftly from our warehouse.

What is included when I buy a complete drive shaft from you?

A complete drive shaft is supplied fully assembled with both inner and outer CV joints as well as CV boots, ready for direct installation on your car.