Audi A4 Allroad 2.0 Tfsi Quattro
Car parts and drivetrain components for Audi A4 Allroad 2.0 Tfsi Quattro. Always check the fit before ordering.
Products for Audi A4 Allroad 2.0 Tfsi Quattro
- Position: Outer
- Seal diameter: 76,5 mm
- Inner splines: 25
- Outer splines: 42
- Position: Front, Outer
- Inner splines: 28
- Outer diameter: 94 mm
- Splines wheel side: 42
- Position: Front left, Front right
- Flange diameter: 123 mm
- Total length: 469 mm
- Splines wheel side: 42
- Position: Rear left
- Total length: 587 mm
- Splines wheel side: 42
- Position: Rear right
- Total length: 545 mm
- Splines wheel side: 42
- Position: Rear left, Rear right
- Flange diameter: 100 mm
- Total length: 626 mm
- Splines wheel side: 42
- Position: Outer
- Seal diameter: 76,5 mm
- Inner splines: 33
- Outer splines: 42
- Joint diameter: 88 mm
- Number of centre bearings: 1
- Number of joints: 2
- Total length: 1,529 mm
- Position: Rear
- Number of centre bearings: 1
- Number of joints: 2
- Total length: 1,630 mm
- Position: Rear left, Rear right
- Flange diameter: 100 mm
- Total length: 630 mm
- Splines wheel side: 42
- Position: Rear
- Number of centre bearings: 1
- Number of joints: 3
- Total length: 1,640 mm
- Position: Front, Outer
- Inner splines: 25
- Outer diameter: 85 mm
- Splines wheel side: 42
- Diameter: 30 mm
- Height: 102 mm
- Hole spacing c/c: 228 mm
- Inner diameter: 30 mm
- Bearing thickness: 15 mm
- Position: Outer
- Seal diameter: 76 mm
- Inner splines: 27
- Outer splines: 42
- ABS teeth: 0
- Position: Rear
- Number of joints: 2
- Total length: 1,493 mm
- Position: Front, Outer
- Inner splines: 28
- Outer diameter: 94 mm
- Splines wheel side: 42
- Position: Front left, Front right
- Flange diameter: 123 mm
- Total length: 466 mm
- Splines wheel side: 42
Frequently Asked Questions about Drivetrain Parts for Audi A4 Allroad 2.0 Tfsi Quattro
How do I know if my Audi A4 Allroad needs a new drive shaft?
The most common signs are vibrations under acceleration or noises such as clicking when cornering. If you notice a torn CV boot and grease has leaked out, there is a high risk that the shaft or joint needs replacing.
Do all Audi A4 CV joints fit the Allroad model?
No, the Allroad often has specific dimensions and operating angles due to its increased ride height. It is therefore crucial to select your vehicle make, model and engine variant to find the exact parts for your 2.0 Tfsi Quattro.
What is the difference between an inner and an outer CV joint on my Audi?
The outer CV joint sits at the wheel and allows for steering movement, while the inner joint sits against the gearbox or differential and accommodates length changes as the suspension moves.
Can I replace just the CV boot if the joint is still working?
Yes, if you catch a split CV boot early before dirt and grit have damaged the joint, you can replace just the boot and repack it with fresh grease to prolong the life of the joint.
Why does my car vibrate even though the drive shafts look intact?
On a Quattro model, vibrations can also originate from the propeller shaft or its centre bearing. Check for imbalance or play in the prop shaft universal joints.
Is all mounting hardware included when I buy a CV joint from you?
Yes, our CV joints are typically supplied as complete kits including the CV boot, grease, clamps and fitting bolt or nut to ensure a proper installation.